SNDWAY SW-B40/B60

Contents

SNDWAY SW-B40/B60 Laser Distance Meter User Manual

Models: SW-B40, SW-B60

Accurate and reliable millimeter-level high precision measurement.

1. Safety Regulations

Please read the safety regulations and operation guide carefully before operating this device.

  • Improper operations without complying with the manual could cause damage to the device, influence measurement results, or cause bodily injury.
  • The instrument is not allowed to be disassembled or repaired in any way. It is forbidden to make any legal modification or performance change to the laser emitter.
  • Keep the device out of reach of children and avoid use by unauthorized personnel.
  • It is strictly prohibited to aim the laser beam at eyes or other parts of the body. Do not aim the laser at surfaces with strong reflection.
  • Due to potential electromagnetic radiation interference, do not use the meter near medical equipment or in inflammable/explosive environments.
  • Discarded batteries or the meter device must not be disposed of as household garbage. Please handle them in accordance with local laws and regulations.
  • For any quality issues or questions, please contact local distributors or the manufacturer for support.

Laser Hazard Level: Class 2 (<1mW)

2. Product Overview

The SNDWAY Laser Distance Meter is a compact and portable device designed for precise indoor measurements. It offers various measurement modes and features a clear LCD screen for easy reading.

SNDWAY SW-B40 and SW-B60 Laser Distance Meters showing various measurement functions like length, area, volume, Pythagorean, wall area, max/min, lithium charging, and LCD screen.

Figure 2.1: SNDWAY SW-B40 and SW-B60 Laser Distance Meters with key features.

Video 2.1: Overview of the SNDWAY Laser Distance Meter's features and functions.

Key Features:

  • Single/Continuous Measurement
  • Area/Volume Measurement
  • Wall Area Rapid Measurement
  • Pythagorean Measurement
  • Max/Min Value Tracking
  • Self-Calibration Function
  • Sound On/Off
  • Voice Prompt
  • Large Horizontal LCD Screen
  • Type-C Fast Charging with 850mAh Lithium Battery

3. Setup

3.1 Battery Installation and Charging

The device is equipped with a built-in, non-removable 3.7V/850mAh lithium battery. Please ensure the device is fully charged before first use or if it has not been used for a long time.

  • If the device does not turn on or shows no power indication, it needs charging.
  • Use a DC 5V ≥1A charging adapter (a standard phone charger is recommended) with the Type-C USB interface.
  • During charging, the battery icon on the screen will scroll and flash until charging is complete.
  • For prolonged storage, charge the device every six months to prevent battery damage.
SNDWAY Laser Distance Meter with Type-C charging cable connected.

Figure 3.1: Type-C fast charging interface.

3.2 Power On/Off

  • To Power On: In the off state, short press the READ button. The device and laser will start simultaneously and enter standby mode.
  • To Power Off: In the on state, long press the READ button for 3 seconds. The device will also automatically turn off after 150 seconds of no operation.
  • Force Shutoff: In case of unexpected errors, long press the READ button for over 10 seconds to force the device to shut off.

4. Operating Instructions

4.1 Laser On/Off

  • To Turn On Laser: When in standby mode, short press the READ button. The laser will turn on. The laser icon will appear at the top left of the display.
  • To Turn Off Laser: When the laser is on, short press the READ button. The laser will automatically turn off after 20 seconds if no operation.

4.2 Reference Point Selection

Press the button to switch the measurement reference point. The default reference point is the rear of the device.

SNDWAY Laser Distance Meter showing front and back reference points.

Figure 4.1: Illustration of front and back reference points.

4.3 Unit Setting

Long press the button to cycle through and set the current measurement unit. The default unit is 0.000m. There are 6 units available:

Option Length Unit Area Unit Volume Unit
10.000 m0.000 m²0.000 m³
20.00 ft0.00 ft²0.00 ft³
30.0 in0.00 ft²0.00 ft³
40'00" 1/160.00 ft²0.00 ft³
SNDWAY Laser Distance Meter displaying measurements in different units like meters and inches.

Figure 4.2: Multiple measurement units can be selected.

4.4 Backlight On/Off

The backlight automatically turns on and off. It stays on for 15 seconds during operation and turns off automatically after 15 seconds of inactivity.

4.5 Sound On/Off

Press the button to toggle the sound on or off. The sound setting can also be adjusted during self-calibration.

4.6 Self-Calibration

To ensure instrument accuracy, a self-calibration function is provided. This allows you to adjust the measurement accuracy by ±9mm.

  • Calibration Method: In the power-off state, press and hold both the and buttons simultaneously.
  • When the screen lights up, release the buttons immediately and keep pressing . 'CAL' will be displayed within 3 seconds, with flashing numbers at the bottom.
  • Use the and buttons to adjust the calibration value.
  • Press READ to save the calibration result.

4.7 Measurement Modes

The device supports various measurement modes:

Diagrams showing single measurement, continuous measurement, area/volume measurement, and Pythagorean measurement.

Figure 4.3: Various measurement modes for different scenarios.

4.7.1 Single Distance Measurement

  • Short press the READ button to turn on the laser beam.
  • Press the READ button again for a single measurement. The result will be displayed in the major display area.

4.7.2 Continuous Measurement

  • Long press the READ button under measuring mode to enter continuous measurement mode.
  • The maximum and minimum measuring results will be displayed in the auxiliary display area, and the current result in the major display area.
  • Short press the READ button or button to exit continuous measuring mode.

4.7.3 Area Measurement

  • Press the button once. The area icon will appear on the screen, with one side of the rectangle blinking.
  • Press READ to measure the length.
  • Press READ again for the width.
  • The device calculates and displays the area in the major display area.

4.7.4 Volume Measurement

  • Press the button twice to enter volume measurement mode. The volume icon will appear at the top of the screen.
  • Press READ for length.
  • Press READ again for width.
  • Press READ a third time for height.
  • The device calculates and displays the volume in the major display area.
  • Press to clear the result and measure again if necessary.

4.7.5 Wall Area Rapid Measurement (Painter Function)

When the meter is in area mode, you can use the add/subtract function to total up the area of several surfaces.

  • Press the button three times until the wall area icon is showing.
  • Press READ to measure the height of the wall first.
  • Press READ to measure the bottom edge of the first wall. The first area will be displayed.
  • Repeat these operations for more walls.
  • Press button to clear the previous measuring result and start a new measurement.
SNDWAY Laser Distance Meter performing wall area rapid measurement.

Figure 4.4: Wall area rapid measurement in progress.

4.7.6 Pythagorean Indirect Measurement

There are four Pythagorean modes to assist in measuring hard-to-reach targets.

  • Mode 1 (Calculate second leg): Short press four times. The hypotenuse will be blinking. Press READ for hypotenuse (a), then READ for one leg (b). The device calculates the other leg (x).
  • Mode 2 (Calculate hypotenuse): Press five times. One leg will be blinking. Press READ for one leg (a), then READ for the other leg (b). The device calculates the hypotenuse (x).
  • Mode 3 (Calculate leg in full line): Press six times. One side will be blinking. Press READ for side (a), then READ for median line (b), then READ for another side (c). The device calculates the leg in full line (x).
  • Mode 4 (Calculate leg in full line): Press seven times. The hypotenuse will be blinking. Press READ for one hypotenuse (a), then READ for another hypotenuse (b), then READ for one leg (c). The device calculates the leg in full line (x).
  • Important: Legs must be shorter than the hypotenuse, otherwise an "err" message will appear. Ensure all measurements start from the same point for accuracy.
Diagrams illustrating area/volume and Pythagorean measurements.

Figure 4.5: Examples of Area/Volume and Pythagorean measurements.

5. Maintenance

  • Do not store the meter in high temperature or high humidity environments for extended periods.
  • If not used frequently, remove the battery and store the meter in its allocated portable bag in a cool and dry place.
  • Keep the device surface clean. Use a wet soft cloth to clean dust. Do not use corrosive liquids on the meter.
  • The laser output window and focus lens can be maintained according to standard optical device maintenance procedures.

6. Troubleshooting

If you encounter any issues, refer to the table below for common error messages and solutions:

Error Code Cause Solution
ErLow powerChange the power supply (recharge battery)
ErrorWorking temperature outside specified rangeUse the device within the operating temperature range (0°C~40°C)
ErrorHypotenuse is larger than the sum of the two legs (Pythagorean measurement)Ensure correct measurement input; legs must be shorter than the hypotenuse.
ErrorMeasurement range exceeded during daylight or poor reflection properties of targetUse a target plate to increase reflection or measure in suitable conditions.

7. Specifications

Table of product size and parameters for SNDWAY laser distance meter.

Figure 7.1: Product size and parameters table.

Project SW-B40/50/60
Measuring range40m/50m/60m (131.2ft/164ft/196.8ft)
Measurement accuracy±(2mm+d*one ten thousandth)*
Minimum display unit0.001m / 0.039 inch
Continuous measurement√
Area volume measurement√
Pythagorean indirect measurement√
Self-calibration function√
Max / Min√
Sound on/off√
Voice prompt√
Laser typelevel 2 630-670nm, <1mW
Auto off laser time20s
Automatic shutdown time150s
Storage temperature range-20°C~60°C / -4°F~140°F
Operating temperature range0°C~40°C / 32°F~104°F
Storage humidity20%~80%RH
Battery3.7V 850mAh lithium battery
Charge and discharge times500 times
Charging specificationsDC 5V ≥1A Type-C USB interface
Full power work times8000 times
ScreenSegment LCD
Dimensions100.3x33.4x18.3mm / 3.95x1.31x0.72 inch
Battery IncludedNo (built-in rechargeable)
High-concerned chemicalNone
CertificationCE
OriginMainland China

*Typical Tolerance: ±2mm, when reflectivity is 100% (white surface) and ambient light is <2000 LUX at 25°C. Tolerance may vary based on distance, reflectivity, and ambient light.

8. User Tips

  • Indoor Use Only: This model is specifically designed for indoor use and should not be used outdoors. For outdoor ranging requirements, please consult customer service or consider purchasing a general indoor and outdoor model.
  • Bluetooth Functionality: While the product title mentions 'Bluetooth', please verify the specific model (e.g., SW-BT40) for actual Bluetooth connectivity if this feature is critical for your application.
  • Portability: The device is small and portable (10cm length, 1.8cm thickness), making it easy to carry in a pocket for convenient measurements.
  • Clear Display: The large font display on the horizontal screen allows for easy reading of multiple data sets simultaneously.
SNDWAY Laser Distance Meter being placed into a pocket, demonstrating its compact size.

Figure 8.1: The compact design allows for easy portability.

9. Frequently Asked Questions

No specific FAQs are available at this time. Please refer to the troubleshooting section or contact customer support for assistance.

10. Warranty and Support

For detailed warranty information and customer support, please refer to the official product documentation or contact your seller.

An electronic version of the user manual (PDF) is available for download:

Download User Manual (PDF)

© 2023 SNDWAY. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.