NITECORE P27ix

Contents

NITECORE P27ix Tactical Flashlight User Manual

Model: P27ix

Brand: NITECORE

Important Safety Warnings

Please read this manual carefully before using the product and follow the instructions. Keep it for future reference.

  • This product is intended for use by adults aged 18 and over. Keep this product out of reach of children.
  • This product may contain small assembly parts. To minimize the risk of choking or suffocation, keep it out of reach of children and pets.
  • CAUTION! Possible dangerous radiation! DO NOT stare directly into the light/laser beam or shine the light directly into the eyes or any reflective surfaces!
  • The product will generate massive heat during prolonged operation. Exercise caution during use. It is recommended not to use high brightness levels for extended periods to prevent burns and product damage.
  • DO NOT cover or place objects near the head of the product, as this may cause damage or accidents due to high temperatures.
  • DO NOT use the product to illuminate flammable or explosive materials, as high heat may lead to combustion or explosion.
  • Use the product in a standard manner to avoid accidents in the event of product failure.
  • DO NOT submerge the product into any liquid when it is hot. This may cause irreparable damage due to air pressure differences.
  • When storing in an enclosed or flammable environment (e.g., pocket, backpack) or for prolonged disuse, turn off the product and activate lockout mode, loosen the battery cap, or remove the battery to prevent accidental activation, excessive heat, or battery leakage.
  • DO NOT expose the product to temperatures above 60°C (140°F) for prolonged periods, as this poses a risk of battery explosion or combustion.

Product Overview

The NITECORE P27ix is a customizable variable beam pattern tactical flashlight designed for versatile use in various missions and situations. It features a powerful 5000-lumen output and a robust construction.

NITECORE P27ix Tactical Flashlight with key features: 1 For All, 2 Grips, 3 Beam Patterns, 4 Customizable Settings, 5000 Lumens, 6 Stainless Steel High-Wear Parts.
NITECORE P27ix Tactical Flashlight highlighting its key features: versatile design, dual grip options, multiple beam patterns, customizable settings, 5000 lumens output, and stainless steel high-wear parts.

Key Features:

  • LEDs: Utilizes 4 five-core M515S LEDs for a max output of 5,000 lumens.
  • Beam Performance: Peak beam intensity of 46,320cd and max throw of 430 meters.
  • Brightness Levels & Special Modes: Offers 4 brightness levels, LUMIN SHIELD®, STROBE READY™, SEARCH, and WARNING FLASH.
  • Customization: Supports button customization for quick access to special modes and brightness levels.
  • Grip Options: Two grip options available: Duty Grip for everyday use (operated via SET Button) and Tactical Grip for tactical applications (controlled by Tail Button and Engage Button).
  • Battery: Includes a NITECORE NL2155HPi 21700 Li-ion battery (5,500mAh) and is compatible with CR123/RCR123 batteries.
  • Reflector: Micro-textured orange peel reflector for long-range and wide-angle lighting.
  • Circuitry: Highly efficient constant current circuit provides a stable output for up to 100 hours.
  • Indicators: Level and battery indicators available for current brightness level and remaining battery power.
  • Controls: Designed with dual tail buttons and a side SET button.
  • Charging: Intelligent Li-ion battery charging circuit with a USB-C charging port, supporting QC/PD fast charging up to 18W.
  • Lockout: Lockout switch (Rapid Lock™) available (Patent No. CN202322748377.2; US Patent No. US12203638B1; EU Patent No. EP4459174A1).
  • Strike Bezel: High-strength stainless steel strike bezel with silicon nitride ceramic tips, capable of breaking glass quickly.
  • Thermal Regulation: Incorporated Advanced Temperature Regulation (ATR) module (Patent No. ZL201510534543.6).
  • Construction: Constructed from 7075-T6 aero grade aluminum alloy with HA III military grade hard-anodized finish.
  • Durability: Waterproof and dustproof rating in accordance with IP68 (2 meters submersible), impact resistant to 2 meters.

Specifications

AttributeValue
Brand NameNITECORE
Model NumberP27ix
Item TypeFLASHLIGHTS
Flashlight TypeTactical Flashlight
LED4 x NiteLab M515S LED
Max Output5,000 Lumens
Max Throw430m
Max Beam Intensity46320cd
Battery Capacity5,500mAh (NITECORE NL2155HPi 21700 Li-ion battery)
Charging18W USB-C Fast Charging
ChargerRechargeable (USB-C)
Is Batteries IncludedYes
Switch ModeHigh/Middle/Low
WaterproofYes (IP68, 2 meters submersible)
Impact Resistance2 meters
Body MaterialAluminum alloy (Military-Grade 7075-T6)
FinishHA III Military Grade Hard-Anodized
Length143mm (5.63")
Head Diameter32mm (1.26")
Tube Diameter26mm (1.02")
Tail Width33mm (1.30")
Weight (Battery and Accessory Excluded)124g / 4.37 oz
Weight (Battery Included)201g / 7.09 oz

Technical Data (Runtime and Throw)

The stated data is measured by using a 21700 i Series rechargeable Li-ion battery (5,500mAh), in accordance with the international flashlight testing standards ANSI/PLATO FL 1-2019, at an ambient temperature of 26°C (79°F) from the NITECORE Lab. Data may vary in real-world use due to different battery usage or environmental conditions.

ModeOutput (Lumens)Runtime (Hours)Throw (Meters)Beam Intensity (cd)
LUMIN SHIELD®*5,000--30022,500
SEARCH*2,500--43046,320
TURBO (Floodlight)1,5002h 30min1808,100
HIGH (Floodlight)4006h851,806
MID (Floodlight)8025h33272
LOW (Floodlight)15100h1449
TURBO (Mixed Light)1,5002h 30min25115,750
HIGH (Mixed Light)4006h1143,249
MID (Mixed Light)8025h49600
LOW (Mixed Light)15100h20100
TURBO (Spotlight)1,5002h 30min30222,800
HIGH (Spotlight)4006h1636,642
MID (Spotlight)8025h641,024
LOW (Spotlight)15100h31240
WARNING FLASH1,000------
STROBE*5,000------

* The max outputs of LUMIN SHIELD®, SEARCH, and STROBE are only accessible when using NITECORE 21700 i Series batteries with an output over 15A. The data is tested without temperature regulation.

Battery Installation & Charging

Battery Installation

Diagram showing battery installation and components of the NITECORE P27ix flashlight, including SET Button, Tail Button, Engage Button, Lockout Switch, and USB-C Charging Port.
Battery installation diagram for the P27ix, showing the positive end of the battery facing the head.

As illustrated, after unscrewing the battery cap, insert/remove the battery(s) and screw to tighten the tail cap. Please remove the insulation film before first use.

Warning: Ensure the battery(s) is/are inserted with the positive end facing towards the head. The product will not work if the battery(s) is/are incorrectly inserted.

Battery Options

The product is only compatible with NITECORE 21700 i Series batteries with an output over 15A and CR123/RCR123 batteries.

  • DO NOT attempt to use the product to charge CR123/RCR123 batteries.
  • The product is NOT compatible with conventional 21700/18650 batteries.
  • When using CR123/RCR123 batteries, the maximum output is limited to 1,000 lumens.

Charging Function

NITECORE P27ix flashlight connected to a USB-C charger, illustrating 18W fast charging.
The P27ix supports 18W USB-C fast charging, fully charging in approximately 2 hours with a PD/QC adapter.

The product is equipped with an intelligent charging system. Use the USB cable to connect an external power supply (e.g., an adapter, power bank or other USB charging devices) to the charging port to begin the charging process.

  • The product supports QC/PD fast charging. During the charging process, the green battery indicators will gradually transition from flashing to a steady light to display the battery level.
  • When the battery is fully charged, the product will automatically cease the charging process and the green battery indicators will become steadily turned on to inform the user.
  • The lighting function is available during charging, except for LUMIN SHIELD®, SEARCH, and STROBE.
  • The normal charging time for a 21700 i Series Li-ion battery (5,500mAh) is approx. 3 hours (charged via a 5V/2A adapter); the fast charging time is approx. 2 hours (charged via a PD/QC adapter).

Power Indication

After the light is on, the green battery indicators will display the remaining battery power and automatically go off after 3 seconds.

Low Power Indication: When the battery power is below 10%, a green power indicator will flash, while the output may dim or the flashlight may become unresponsive. Please recharge the product or replace the battery as soon as possible.

Enable / Disable Indicators: When the light is off, while half pressing and holding the Tail Button, quickly short press the SET Button three times to turn off both the battery indicators and level indicators. To enable the indicators, repeat the same steps.

Status of IndicatorsPower Level
4 Constant-on75%-100%
3 Constant-on50% - 75%
2 Constant-on25% -50%
1 Constant-on10%-25%
1 Flashing<10% (Please recharge the product or replace the battery as soon as possible)

Operating Instructions

The P27ix features multiple functions. The following operations are based on factory default settings. If any settings have been changed, you may restore the product to factory defaults before proceeding.

Quick Start Guide

Quick Start Guide diagram showing Tail Button, Engage Button, SET Button, Tactical Grip, Duty Grip, and On/Off operations.
Quick Start Guide for basic operations including button functions and grip styles.

On / Off

  • Turn On: Half press the Tail Button for MID, Full press for TURBO.
  • Turn Off: When the light is on, full press the Tail Button to turn it off.
  • Brightness Level Adjusting: Short press the SET Button to cycle through LOW - MID - HIGH - TURBO - Off.

Tactical Momentary Illumination

  • When off, half press and hold the Tail Button to access MID. Release to turn off.
  • When off, full press and hold the Tail Button to access TURBO. Release to turn off.
  • When off, half press and hold the Engage Button to access LUMIN SHIELD. Release to turn off.
  • When off, full press and hold the Engage Button to access STROBE. Release to turn off.

WARNING FLASH

When the light is off, press and hold the SET Button until the WARNING FLASH is activated. Short press the SET Button to turn the light off.

Detailed Operation Guide

Lockout / Unlock

Diagram of the Rapid Lock™ Lockout Switch on the NITECORE P27ix flashlight, showing locked and unlocked positions.
Slide the lockout switch to lock or unlock, preventing accidental activation.
  • Lockout (Default Setting): When the light is on/off, slide the Lockout Switch (Rapid Lock™) up to access Lockout Mode. All buttons are unavailable to activate the flashlight.
  • Unlock: In Lockout Mode, slide down the Lockout Switch (Rapid Lock™) to exit Lockout Mode.

Grip Options

The P27ix offers two distinct grip options: Duty Grip and Tactical Grip, each optimized for different operational needs.

Illustration of the Duty Grip on the NITECORE P27ix flashlight, showing comfortable hold for daily use.
Duty Grip: Built for daily patrol and duty use, easy to operate and comfortable for extended use.
Illustration of the Tactical Grip on the NITECORE P27ix flashlight, showing a secure hold for tactical situations.
Tactical Grip: Engineered for tactical suppression and close-quarters engagement, it delivers professional-grade reliability for any unexpected situation in law enforcement.

Mode Switching (Basic Mode / Professional Mode)

  • To Switch Modes: When the light is off, full press and hold the Tail Button. While holding it, quickly press the SET Button three times. The light will flash once (Basic Mode) or twice (Professional Mode) to confirm the mode has been successfully switched.
  • Basic Mode (Default Setting): Refer to the Quick Start Guide for operations.
  • Professional Mode:
    • On: When the light is off, short press the SET Button to turn it on.
    • Off: When the light is on, long press the SET Button to turn it off.
    • Brightness Level Adjusting: When the light is on, short press the SET Button to cycle through LOW - MID - HIGH - TURBO.
    • Note: In Professional Mode, the product features brightness level memory function. When reactivated, it will automatically access the previous memorized brightness level.

Beam Pattern Switching (Default Setting: Floodlight)

Diagram illustrating three beam patterns: Long-Distance Search (Long-Throw Light), Close-Range Lighting (Floodlight), and General Use (Mixed Light).
The P27ix offers three distinct beam patterns to adapt to various missions.
  • When LOW/MID/HIGH/TURBO is activated by short pressing the SET Button, press and hold the SET Button to cycle through Spotlight - Mixed Light - Floodlight. Release the button to select and memorize the beam pattern. The selected beam pattern will automatically apply to other brightness levels and WARNING FLASH.
  • After turning on the light by half pressing or full pressing the Tail Button, press and hold the SET Button to cycle through Spotlight - Mixed Light - Floodlight. Release to confirm and memorize the beam pattern for the current brightness level.
  • Note: Each brightness level supports independent selection and memorization of a different beam pattern.

Customizable Button Settings

The product features customizable buttons. Both half press and full press of the Engage Button can be configured independently to directly access LUMIN SHIELD®, STROBE or SEARCH. Both half press and half press of the Tail Button can be configured to directly access LOW or MID, while full press and full press of the Tail Button can be configured to directly access HIGH or TURBO.

  • Engage Button Half-press-and-hold Configuration: When the light is off, while half pressing and holding the Engage Button, long press the SET Button to cycle through LUMIN SHIELD (Default Setting) - STROBE - SEARCH. Release both buttons to memorize this setting.
  • Engage Button Full-press-and-hold Configuration: When the light is off, while full pressing and holding the Engage Button, long press the SET Button to cycle through LUMIN SHIELD - STROBE (Default Setting) - SEARCH. Release both buttons to memorize this setting.
  • Tail Button Half Press / Half-press-and-hold Configuration: When the light is off, while half pressing and holding the Tail Button, long press the SET Button to switch between LOW and MID (Default Setting). Release both buttons to memorize this setting.
  • Tail Button Full Press / Full-press-and-hold Configuration: When the light is off, while full pressing and holding the Tail Button, long press the SET Button to switch between HIGH and TURBO (Default Setting). Release both buttons to memorize this setting.

Reset to Factory Default

While in Lockout Mode, half or full press and hold the Engage Button without releasing it. Then, quickly short press the SET Button three times or more. The flashlight will flash three times to confirm that the reset has been successfully completed. Unlock the light to use.

Maintenance

ATR (Advanced Temperature Regulation)

The integrated ATR technology regulates the output of the product according to the working condition and ambient environment to maintain optimal performance.

General Maintenance

Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-based lubricant.

Troubleshooting

  • Flashlight not turning on: Ensure the battery is correctly installed with the positive end facing the head. Check if the battery is charged. If in lockout mode, slide the lockout switch down to unlock.
  • Dim output or unresponsive flashlight: The battery level might be low. Recharge or replace the battery as soon as possible.
  • Inconsistent mode switching: Ensure you are following the correct button press sequence for the desired mode. If settings were changed, consider resetting to factory defaults.
  • Overheating: The flashlight has an Advanced Temperature Regulation (ATR) module. If it gets too hot, the output will automatically adjust to prevent damage. Avoid prolonged use on high brightness levels.

User Tips

  • The customizable beam patterns are highly effective for adapting to different scenarios, from wide-area searches to close-quarters.
  • While the tail switch can be sensitive, users often find they adapt quickly to its operation for rapid mode changes.
  • The USB-C charging is very convenient, allowing for quick recharges without needing a separate charger.
  • For maximum battery life, especially during extended use, utilize lower brightness settings.

Frequently Asked Questions

  • Q: What type of batteries are compatible with the P27ix?
    A: The P27ix is compatible with NITECORE NL2155HPi 21700 Li-ion batteries (5,500mAh) and CR123/RCR123 batteries. It is NOT compatible with conventional 21700/18650 batteries.
  • Q: How long does it take to fully charge the P27ix?
    A: With a 5V/2A adapter, it takes approximately 3 hours. With a PD/QC adapter, it takes approximately 2 hours.
  • Q: Can I use the flashlight while it's charging?
    A: Yes, the lighting function is available during charging, except for LUMIN SHIELD®, SEARCH, and STROBE modes.
  • Q: How do I switch between Basic Mode and Professional Mode?
    A: When the light is off, full press and hold the Tail Button. While holding it, quickly press the SET Button three times. The light will flash once for Basic Mode or twice for Professional Mode to confirm.
  • Q: What is the purpose of the Lockout Switch?
    A: The Lockout Switch (Rapid Lock™) prevents accidental activation of the flashlight when storing or transporting it, ensuring safety and preserving battery life.

Warranty Information

All NITECORE® products are warranted for quality. Any DOA / defective product can be exchanged for a replacement through a local distributor/dealer within 15 days of purchase. After that, all defective / malfunctioning NITECORE® products can be repaired free of charge within 60 months from the date of purchase. Beyond 60 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts.

The warranty will be nullified if:

  • The product(s) is/are broken down, reconstructed and/or modified by unauthorized parties.
  • The product(s) is/are damaged due to improper use.
  • The product(s) is/are damaged due to battery leakage.

For the latest information on NITECORE® products and services, please contact a local NITECORE® distributor or send an email to service@nitecore.com.

© 2023 NITECORE. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.