1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Tuya Smart WiFi Circuit Breaker. This intelligent device allows for remote control, timing functions, and real-time monitoring of power consumption via a mobile application, enhancing the safety and convenience of your electrical system.
2. Setup and Installation
2.1 Physical Installation
The Tuya Smart WiFi Circuit Breaker is designed for rail installation (C45 guide rail). Ensure the power supply is disconnected before installation to prevent electric shock.
- Mount the circuit breaker securely onto a standard C45 guide rail. The device features a positioning buckle for tool-free assembly and disassembly.
2.2 Wiring Diagram
Proper wiring is crucial for safe and correct operation. Refer to the diagram below:
- Inlet: Connect the neutral (N) and live (L) wires to the bottom terminals labeled 'N Load' and 'L Load' respectively.
- Outlet: Connect the neutral (N) and live (L) wires from the top terminals labeled 'N Power' and 'L Power' to your load.
- Important: Separation of neutral and live wires is required. Input must include both neutral and live wires. Output may have live wire only, depending on the load.
2.3 App Installation and Pairing
- Download the Tuya Smart or Smart Life app from your smartphone's app store (iOS or Android).
- Register or log in to your account.
- Ensure your circuit breaker is powered on and the Wi-Fi signal light is blinking (refer to the device for signal light location). If not blinking, press and hold the button for 5-10 seconds to enter pairing mode.
- In the app, tap '+' to add a new device. Select 'Electrical' > 'Circuit Breaker (Wi-Fi)'.
- Follow the on-screen instructions to connect the device to your 2.4GHz Wi-Fi network.
- Once connected, the Wi-Fi signal light on the device will become solid.
3. Operating Instructions
3.1 Manual Control
Each circuit breaker unit is equipped with a physical button switch for manual ON/OFF control. Press the button to toggle the power state of the connected load.
3.2 Remote Control via Mobile App
After successful pairing, you can control and monitor your circuit breaker from anywhere using the Tuya Smart or Smart Life app.
- ON/OFF Control: Tap the power icon in the app to remotely switch the circuit breaker on or off.
- Power Monitoring: For metering versions, view real-time total power consumption, current, voltage, and power. Access historical records for detailed analysis.
3.3 Timing Functions
The app supports various customizable timing controls to automate your devices:
- Timer Mode: Set a specific time for the device to turn on or off (e.g., turn on living room light at 18:00).
- Countdown Mode: Set a duration after which the device will turn off (e.g., turn off bedroom light in 10 minutes).
- Cycle Timer Mode: Schedule repetitive ON/OFF cycles (e.g., turn on living room light at 06:00 and 08:00).
- Other Timers: The app may also support random timers and astronomical timers for advanced automation.
3.4 Protection Features
The circuit breaker provides enhanced safety features:
- Overvoltage Protection: Automatically disconnects power if voltage exceeds a safe limit.
- Undervoltage Protection: Automatically disconnects power if voltage drops below a safe limit.
4. Maintenance
The Tuya Smart WiFi Circuit Breaker is designed for durability and reliability. It is constructed from flame-retardant materials for enhanced safety.
- Cleaning: Ensure the device is powered off before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Firmware Updates: The mobile application will notify you of any available firmware updates. It is recommended to keep the device firmware updated for optimal performance and security.
- Environmental Conditions: The device is designed to operate within an environmental class of -5°C to +40°C. Avoid exposing it to conditions outside this range.
5. Troubleshooting
- Device not connecting to Wi-Fi:
- Ensure your Wi-Fi network is 2.4GHz. 5GHz networks are not supported.
- Check if the Wi-Fi signal light on the device is blinking. If not, press and hold the button for 5-10 seconds to enter pairing mode.
- Verify your Wi-Fi password is correct in the app.
- Move the device closer to your Wi-Fi router.
- Device not responding to app commands:
- Check your internet connection.
- Ensure the device's Wi-Fi signal light is solid, indicating a stable connection.
- Restart the app or the circuit breaker.
- Circuit breaker trips unexpectedly:
- This could be due to overvoltage or undervoltage protection activating. Check your power supply voltage.
- Ensure the connected load does not exceed the rated current of the circuit breaker (e.g., 63A or 80A).
- If the issue persists, consult a qualified electrician.
6. Specifications
| Feature | Detail |
|---|---|
| Product Name | Smartphone Remote Control Switch |
| Product Voltage | 90V-300V |
| Product Current | 63A (Wifi switch version), 80A (Metering Protector version) |
| Control Mode | Manual / Remote APP |
| Communication Protocol | WIFI (2.4GHz) |
| Protection Level | IP20 |
| Environmental Class | -5°C ~ +40°C |
| Installation Method | Rail Installation (C45 guide rail) |
| Dimensions (H x D x W) | 82mm x 50mm x 18mm |
7. Warranty and Support
For detailed warranty information and technical support, please refer to the official product documentation or contact the seller directly.
A comprehensive user manual in PDF format is available for download. You can access it via the following link: User Manual (PDF).