Introduction
Welcome to the world of immersive audio with your new JBL LIVE BEAM 3 True Wireless Earphones. These earphones combine cutting-edge technology with user-friendly design, featuring a smart touchscreen charging case, adaptive noise cancelling, and high-resolution audio. This manual will guide you through the setup, operation, and maintenance of your device to ensure you get the best possible experience.
What's in the Box
Your JBL LIVE BEAM 3 package includes the following components:
- 1 pair of JBL LIVE BEAM 3 wireless earbuds
- 1 charging case with built-in 1.45-inch touchscreen
- 1 USB-C charging cable
Setup
Quick Start Guide
- Open the case: The earbuds will automatically enter pairing mode.
- Connect via Bluetooth: On your device (smartphone, tablet, laptop), go to Bluetooth settings and select "JBL LIVE BEAM 3" from the list of available devices.
- Control Audio: Use the charging case's touchscreen to switch between Active Noise Cancelling (ANC) and Ambient Sound modes, or tap the earbuds for music and call controls.
- Charge: Place the earbuds back into the charging case to charge them.
Operating Instructions
Active Noise Cancelling (ANC) & Ambient Sound
The JBL LIVE BEAM 3 features True Adaptive Noise Cancelling with customized control. Four noise-sensing microphones automatically adapt to your surroundings in real-time, allowing you to tune out the outside world or let in ambient sound as needed. You can switch between ANC and Ambient Sound modes directly from the charging case touchscreen or through the JBL Headphones App.
Smart Charging Case Touchscreen Control
The 1.45-inch touchscreen display on your Smart Charging Case provides full control over your earbuds without needing to access the JBL App on your smartphone. You can customize every aspect of your JBL Live Beam 3 earbuds directly from the case, whether connected to a laptop, TV, smartphone, or tablet.
Crystal Clear Calls
The JBL LIVE BEAM 3 is equipped with six beamforming microphones designed to reduce wind and noise interference, ensuring your voice comes through loud and clear during calls. You can also customize your calling environment for optimal clarity.
JBL Headphones App
For advanced customization and fine-tuning of your audio experience, download the official JBL Headphones App. The app allows you to personalize sound settings, adjust ANC levels, and access additional features.
High-Resolution Audio
Experience Hi-Res Audio Wireless with JBL signature sound. Each driver is precisely tuned to deliver deep bass, balanced mid-range, and refined high frequencies at any volume level. JBL Spatial Sound provides an immersive, concert-like audio experience.
Battery and Charging
The JBL LIVE BEAM 3 offers extended playtime to keep your music going all day.
- Total Playtime: Up to 48 hours with the charging case.
- Earbud Playtime: Up to 12 hours on a single charge.
- Charging Case: Provides an additional 36 hours of battery life.
- Quick Charge: A 10-minute charge can provide up to 4 hours of playtime.
- Wireless Charging: The charging case supports wireless charging for convenience.
Maintenance and Care
To ensure the longevity and optimal performance of your JBL LIVE BEAM 3 earphones, follow these simple care tips:
- Keep Dry: Avoid exposure to water and excessive moisture. While the earphones are IP55 waterproof and dustproof, prolonged submersion or exposure to harsh liquids can cause damage.
- Clean Regularly: Gently clean the earbuds and charging case with a soft, dry cloth. Remove any earwax or debris from the ear tips and speaker grilles using a small brush or cotton swab.
- Store Properly: Always store the earbuds in their charging case when not in use to protect them from dust, dirt, and physical damage.
Troubleshooting
If you encounter any issues with your JBL LIVE BEAM 3 earphones, try the following solutions:
- No Sound/Connection Issues:
- Ensure both earbuds are charged.
- Verify Bluetooth is enabled on your device and the earphones are selected.
- Try unpairing and re-pairing the earphones with your device.
- Restart your source device.
- Ensure the earphones are within the 10-meter Bluetooth range.
- Charging Problems:
- Check that the charging cable is securely connected to both the case and a power source.
- Ensure the charging contacts on the earbuds and inside the case are clean and free of debris.
- If using wireless charging, ensure the case is properly aligned on the charging pad.
- App Connectivity:
- Confirm your earphones are connected via Bluetooth to your device before opening the JBL Headphones App.
- Ensure the app is updated to the latest version.
- Try closing and reopening the app.
- Noise Cancelling Not Working:
- Ensure ANC is activated via the charging case touchscreen or the JBL Headphones App.
- Adjust the fit of the earbuds in your ears to ensure a proper seal.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | JBL |
| Model Name | LIVE BEAM 3 |
| Communication | True wireless (Bluetooth) |
| Wireless Type | Bluetooth |
| Active Noise-Cancellation | Yes |
| Volume Control | Yes |
| Control Button | No (Touchscreen on case, tap controls on earbuds) |
| Waterproof | Yes (IP55 rating) |
| Material | ABS |
| Certification | CE |
| Origin | Mainland China |
User Tips
Based on user experiences, here are some helpful tips for your JBL LIVE BEAM 3 earphones:
- Battery Life: The battery life is notably long, so you might forget to charge them. A quick 10-15 minute charge can provide significant playtime.
- Stable Bluetooth: Users report super stable Bluetooth connections, even across rooms or with walls in between, with no disconnections within a 10-meter range.
- Sound Quality: The sound quality is consistently praised as excellent, with effective noise cancellation for their size.
- App Integration: While the touchscreen case offers app-free control, the JBL Headphones App provides deeper customization for sound and ANC levels.
Warranty and Support
JBL products are designed for durability and performance. For detailed warranty information, please refer to the official JBL website or the warranty card included with your purchase. If you require further assistance or support, please visit the JBL support page or contact their customer service.
A user manual in PDF format is available for download, which may contain additional detailed instructions and diagrams. You can access it here.