Mercedes-Benz A0009055605

Contents

Mercedes-Benz 360 Degree Surround View Camera

Model: A0009055605 - User Manual

1. Safety Warnings and Precautions

  • Do not force operation during installation to avoid damage to the camera or vehicle components.
  • Ensure all wiring connections are correct and secure to prevent electrical issues or short circuits.
  • This product is an automotive component and is not suitable for children. Keep out of reach of children under 36 months.
  • Avoid exposing the camera to extreme physical shock or harsh chemicals.

2. Product Introduction

This document provides instructions for the installation, operation, and maintenance of the A0009055605 360-degree surround view camera, designed as a direct replacement part for various Mercedes-Benz models. This camera is an integral component of your vehicle's surround view system, providing enhanced visibility for parking and maneuvering.

Mercedes-Benz 360 Degree Surround View Camera A0009055605

Figure 1: Front-side view of the A0009055605 camera unit.

3. Setup and Installation

The A0009055605 camera is designed for direct replacement, offering a simple plug-and-play installation without requiring complex wiring modifications. Professional installation is recommended to ensure correct fitment and functionality.

  1. Preparation: Ensure the vehicle's ignition is off and the battery is disconnected before beginning installation.
  2. Access: Carefully remove the necessary vehicle trim and mirror components to access the camera mounting location. Refer to your vehicle's service manual for specific disassembly instructions.
  3. Removal: Disconnect the electrical connector from the old camera and carefully remove it from its housing.
  4. Installation: Insert the new A0009055605 camera into the designated slot. Ensure it is securely seated.
  5. Connection: Connect the vehicle's electrical harness to the new camera. Ensure the connection is firm and properly latched.
  6. Reassembly: Reassemble all vehicle trim and mirror components in reverse order of disassembly.
  7. Testing: Reconnect the vehicle battery and test the surround view camera system to confirm proper operation.
Side Mirror Exploded View Diagram with Camera Location

Figure 2: Exploded view of a side mirror assembly, highlighting the camera's typical installation position (item 50).

4. Operating Instructions

This 360-degree surround view camera integrates seamlessly with your Mercedes-Benz vehicle's existing infotainment and driver assistance systems. Once installed and properly connected, the camera feed will be accessible through your vehicle's display when the surround view system is activated (e.g., when parking or at low speeds).

Refer to your Mercedes-Benz vehicle's owner's manual for specific instructions on how to activate, view, and utilize the surround view camera system features.

5. Maintenance

The camera unit is designed to be maintenance-free. To ensure optimal performance and clear images, periodically inspect the camera lens for dirt, dust, or obstructions. Clean the lens gently with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the lens surface.

6. Troubleshooting

If you experience issues with your 360-degree surround view camera, consider the following:

  • No Camera Feed / Black Screen:
    • Check all wiring connections to ensure they are secure and properly seated.
    • Verify that the camera is receiving power.
    • Ensure the vehicle's surround view system is activated according to your car's owner's manual.
  • Intermittent or Distorted Image:
    • Inspect the camera lens for dirt, moisture, or damage. Clean if necessary.
    • Check for loose or damaged wiring connections.

If problems persist after performing these checks, it is recommended to consult a qualified automotive technician or contact customer support.

7. Specifications

Feature Description
Part Number A0009055605
Interchange Part Number A-000-905-55-05
Type 360° Surround View Camera / Parking Assist Camera
Material High-quality plastic (anti-corrosion, wear-resistant, non-deformation)
Placement Side Mirror (integrated into vehicle's surround view system)
Compatibility
  • Mercedes-Benz C-Class (W205) 2018-
  • Mercedes-Benz E-Class (W213) 2016- / (C238) 2017-
  • Mercedes-Benz S-Class (C217) 2015-
  • Mercedes-Benz GLC-Class (C253/X253) 2016-
  • Mercedes-Benz CLS-Class (C257) 2018-
  • Also compatible with W205 S205 C205 A205 C-Klasse, W213 S213 E-Klasse, W217 C217 A217 S-Klasse Coupe & Cabrio & Maybach, W222 S-Klasse, X222 Maybach, W238 A238 C238 E-Klasse Coupe & Cabrio, W253 X253 C253 GLC & GLC Coupe, W257 C257 CLS, X290 AMG GT 4 Türer, N293 EQ.
Rear view of two camera units showing part numbers

Figure 3: Rear view of camera units, showing part number labels.

8. User Tips

  • Verify Compatibility: Before purchasing or installing, always double-check the part number and compatibility list against your specific Mercedes-Benz model, year, and trim level to ensure a perfect fit.
  • Professional Installation: While designed for direct replacement, complex vehicle disassembly may be required. If you are not comfortable with automotive electrical or body work, consider professional installation.

9. Warranty and Support

This product typically comes with a one-year warranty from the date of purchase. For warranty claims, technical support, or any inquiries regarding the product, please contact the seller or manufacturer directly with your purchase details.

© 2023 Mercedes-Benz Camera Manual. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.