MAGIC COLORM Sportage R Fog Lamp Assembly (92201-4T000)

Contents

MAGIC COLORM Fog Lamp Assembly Instruction Manual

Brand: MAGIC COLORM

Model: Sportage R Fog Lamp Assembly (Accessory Number: 92201-4T000)

Compatibility: Kia Sportage R 2011, 2012, 2013

1. Introduction

This manual provides comprehensive instructions for the safe and proper installation, operation, and maintenance of your MAGIC COLORM Fog Lamp Assembly for Kia Sportage R models (2011-2013). Please read this manual thoroughly before use to ensure optimal performance and safety.

The MAGIC COLORM Fog Lamp Assembly is designed to enhance visibility during adverse weather conditions such as fog, rain, snow, and dust, contributing to safer driving. It features reliable halogen lighting, durable construction, and an OE-style design for seamless integration with your vehicle.

2. Important Safety Information & Warnings

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture unnecessarily.

3. Product Overview

The MAGIC COLORM Fog Lamp Assembly is designed as a direct replacement for your vehicle's original fog lights, offering improved illumination and a refreshed aesthetic.

Kia Sportage R with MAGIC COLORM Fog Lamps installed

Figure 3.1: Kia Sportage R with MAGIC COLORM Fog Lamps installed, showing the two fog lamp units.

Key Features:

  • Reliable Halogen Lighting: Equipped with halogen bulbs for bright, stable illumination, improving visibility in fog, rain, snow, and low-light conditions for safer driving.
  • Durable Construction: Made of high-quality ABS housing and scratch-resistant lens, with waterproof and dustproof seals to withstand harsh weather and daily road conditions for long-lasting use.
  • OE-Style Design: Factory-style appearance that blends seamlessly with the vehicle's front bumper, maintaining the original look while upgrading your driving safety and style.

Video 3.1: Product showcase demonstrating the fog lamp's rotation and illumination.

Close-up of the fog lamp's lighting effect

Figure 3.2: Close-up view of the fog lamp's bright and wide lighting effect.

Product details highlighting PC Lens, Bright light, and ABS Housing

Figure 3.3: Detailed view of the fog lamp components, including PC Lens, Bright light, and ABS Housing.

Illustration of the fog lamp's waterproof capabilities

Figure 3.4: The fog lamp is designed to adapt to various weather conditions, including rainy, foggy, snowy, and dusty environments.

4. Specifications

General Specifications:

Attribute Value
Brand Name MAGIC COLORM
Item Type Fog Lamp Assembly
Origin Mainland China
Certification CCC
High-concerned chemical None

Electrical & Material Specifications:

Attribute Value
Voltage 12 V
Lumens 800M
Color Temperature 4300K
Wattage Approximately 27-30W
Material ABS (Housing)
Accessory Number 92201-4T000

Dimensions:

Dimensional drawing of the fog lamp

Figure 4.1: Approximate dimensions of the fog lamp unit (Length: 46cm / 18.11", Height: 19.7cm / 7.76").

5. Installation Instructions

Professional installation is recommended. Ensure the vehicle is turned off and cooled down before beginning installation. Always wear appropriate safety gear.

Step 1: Preparation Work (Safety First)

  1. Park the car steadily on a level surface and engage the handbrake.
  2. Crucially, disconnect the negative cable of the car battery to prevent electrical hazards.

Step 2: Remove the Old Light

  1. Open the tailgate (if applicable for rear lights, for front fog lights, access is typically from the wheel well or under the bumper).
  2. Locate and remove the tail light repair cover from the inside (or relevant access panel for fog lights).
  3. Disconnect the electrical plug from the old lamp.
  4. Unscrew any fixing nuts or bolts holding the old lamp in place.
  5. Carefully pull out the old lamp from its mounting position.

Step 3: Install the New Light (Test First, Then Fix)

Rear view of the fog lamp showing the standard plug

Figure 5.1: Standard plug for easy, non-destructive installation.

  1. Pre-testing: First, connect the new light's plug to the original car harness.
  2. Reconnect the car battery's negative cable.
  3. Turn on the vehicle's power and test whether the fog lights function normally. Check for proper illumination.
  4. Formal Fixing: After confirming that the function is normal, disconnect the battery again.
  5. Align the new light with its designated position and carefully install it.
  6. Tighten all the fixing nuts or bolts from the inside to secure the lamp.
  7. Finally, reconnect the electrical plug securely and replace any removed maintenance covers or panels.
Before and after installation comparison of fog lights

Figure 5.2: Visual comparison of the vehicle before and after fog light installation.

6. Operating Instructions

Once installed, the fog lamps operate in conjunction with your vehicle's existing lighting system. Refer to your vehicle's owner's manual for specific instructions on how to activate the fog lights.

  • Typically, fog lights are activated via a switch on the dashboard or steering column, often in conjunction with your headlights or parking lights.
  • Use fog lights in conditions of reduced visibility (fog, heavy rain, snow) to improve your vehicle's visibility to other drivers and to illuminate the road closer to the vehicle.
  • Turn off fog lights when visibility improves to avoid dazzling oncoming traffic.

7. Maintenance

  • Regular Cleaning: Keep the lens of the fog lamps clean from dirt, dust, and road grime using a soft cloth and mild automotive cleaner. Avoid abrasive materials that could scratch the lens.
  • Sealing Inspection: Periodically check the lamps for any signs of severe water ingress or persistent fogging inside the lamp. Slight fogging can occur and typically clears up as the lamp heats up and dries normally. However, persistent water or fogging may indicate a compromised seal.
  • Bulb Replacement: If a halogen bulb burns out, replace it with a bulb of the same type and wattage (12V, 27-30W, 4300K) to ensure proper function and avoid damage to the electrical system.
  • Wiring Check: Occasionally inspect the wiring and connections for any signs of wear, corrosion, or looseness.

8. Troubleshooting

Common Issues and Solutions:

  • Fog Lamp Not Lighting Up:
    • Check the electrical connections to ensure they are secure.
    • Verify that the vehicle's fog light switch is in the 'ON' position.
    • Inspect the bulb for damage or burnout; replace if necessary.
    • Check the fuse associated with the fog lights in your vehicle's fuse box.
  • Intermittent Lighting:
    • Ensure all wiring connections are tight and free from corrosion.
    • Check for any loose wires or damaged insulation.
  • Water Ingress or Persistent Fogging:
    • While slight, temporary fogging is normal, persistent water inside the lamp indicates a seal issue.
    • Inspect the lamp housing and seals for cracks or damage. If found, the lamp may need to be replaced to prevent further damage to electrical components.

If you encounter issues not listed here or if troubleshooting steps do not resolve the problem, please contact customer support or a qualified automotive technician.

9. Warranty & Support

This product is manufactured by Guangzhou Camel Technology Co., Ltd. and is certified for compliance (CCC). For detailed warranty information and support, please refer to the official product documentation or contact the manufacturer directly.

Manufacturer: Guangzhou Camel Technology Co., Ltd.
Address: No.4 West Fangxin Road, Fangcun Avenue, Liwan District, Guangzhou City, Guangdong Province

EU Authorized Representative: MJCM SAR
Address: 78 Avenue des Champs Elysees Office 326, Paris, France
Contact: mjcm190928@gmail.com, 0033 752907452

For a complete user manual in PDF format, please refer to the link provided by the seller or contact customer support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.