1. Introduction
Thank you for choosing the ASOMETECH WLX-P3 148W GaN USB Type C Charger. This multi-port, multi-function charger is designed to provide efficient and fast charging for a wide range of electronic devices, including laptops, tablets, smartphones, digital cameras, and more. Featuring advanced GaN technology and a real-time status display, it offers intelligent power allocation across its 3 USB-C and 1 USB-A ports.

2. Package Contents
Please check the package for the following items:
- ASOMETECH WLX-P3 148W GaN USB Type C Charger Unit
- User Instruction Manual
3. Product Overview
The ASOMETECH WLX-P3 charger features multiple output ports and a clear display for monitoring charging status.
3.1 Ports
- USB-C1 Port: Supports PD3.1 up to 140W Max.
- USB-C2 Port: Supports PD3.0 up to 100W Max.
- USB-C3 Port: Supports PD3.0 up to 100W Max.
- USB-A1 Port: Supports QC3.0 up to 30W Max.
3.2 Real-Time Status Display
The charger is equipped with a dynamic display that provides real-time information about the charging process. A touch-sensitive button allows you to cycle through different display modes.

Display modes include:
- Total Power: Shows the combined wattage output.
- All Ports: Displays individual wattage output for each connected port (C1, C2, C3, A1).
- Charging Time: Estimates remaining charging time for connected devices.
- Current Temperature: Shows the operating temperature of the charger.
- AI Temp Protect: Indicates active temperature protection status.
4. Setup
- Plug In: Insert the charger into a standard AC wall outlet (100-240V, 50/60Hz).
- Connect Devices: Use appropriate USB charging cables to connect your devices to the available USB-C or USB-A ports on the charger.
- Monitor Display: The display will automatically activate, showing the current charging status.

5. Operating Instructions
5.1 Single Port Charging
When only one device is connected, the charger delivers maximum power for that port:
- USB-C1: Up to 140W (PD3.1)
- USB-C2: Up to 100W (PD3.0)
- USB-C3: Up to 100W (PD3.0)
- USB-A1: Up to 30W (QC3.0)
5.2 Multi-Port Charging (Intelligent Power Allocation)
The charger intelligently distributes power when multiple devices are connected. The total output is 148W Max.



Refer to Figure 5.3 for detailed power distribution scenarios when charging multiple devices. Examples include:
- 2 Ports: C1 (65W) + C2/C3 (65W); C1 (100W) + A1 (30W).
- 3 Ports: C1 (65W) + C2 (45W) + C3 (30W); C1 (100W) + C3 (5V2A) + A1 (5V2A).
- 4 Ports: C1 (65W) + C2 (45W) + C3 (5V2A) + A1 (5V2A).
5.3 Display Operation
Press the touch-sensitive button on the charger's display to cycle through the various information screens (Total Power, All Ports, Charging Time, Current Temperature, AI Temp Protect).
6. Maintenance
- Cleaning: Disconnect the charger from the power outlet and wipe it with a soft, dry cloth. Do not use liquid cleaners or aerosols.
- Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid Damage: Do not disassemble, drop, or apply excessive force to the charger.
- Environment: Ensure to use the charger in a dry environment. Avoid high-temperature or humid conditions.
7. Troubleshooting
- Charger Display Flickers or Output Interrupts: This indicates the charger is in overcurrent protection mode. Immediately reduce the number of connected devices to lessen the load. Disconnect the charger from the power outlet for 5-10 minutes; it will automatically reset. Reconnect devices to resume normal operation.
- Device Not Charging: Ensure the charger is properly plugged into the wall outlet. Check that your charging cables are in good condition and correctly connected to both the charger and your device. Verify that your device supports the charging protocols offered by the charger.
- Charger Feels Warm During Use: It is normal for the charger to generate some heat during operation, especially under heavy loads. This does not affect the product's safety or lifespan. However, avoid operating the charger beyond its rated power for extended periods.
- Display Not Working: Ensure the charger is receiving power. If the issue persists, try unplugging and replugging the charger.
8. Specifications
| Model | WLX-P3 |
| Brand | ASOMETECH |
| Max. Output Power | 148W |
| Input | AC 100-240V, 50/60Hz |
| Output Interfaces | 3 x USB-C Ports, 1 x USB-A Port |
| Fast Charge Protocols | Samsung Adaptive Fast Charge, Huawei FCP, USB PD (PD3.1, PD3.0), Qualcomm Quick Charge (QC4.0, QC3.0) |
| GaN Technology | Yes |
| Display Screen | Yes |
| Type | Quick Charger |
| Certifications | CCC, CE, ROHS, EMC, UL |
| Dimensions (L x W x H) | 110mm x 36mm x 70mm |
| Weight | Approx. 300g |



9. User Tips
- Display Orientation: The charger's display can automatically orient itself in four 90-degree rotations, providing readability regardless of how it's plugged into the outlet.
- Detailed Monitoring: Utilize the display's