Fccemc LED Devil Eye Lights

Contents

Fccemc LED Devil Eye Lights

Motorcycle Car Windshield USB Matrix Pixel Panel Display with App Remote Control

Model: LED Devil Eye Lights

1. Introduction

The Fccemc LED Devil Eye Lights are a versatile decorative lighting system designed for motorcycles, cars, and various home scenarios. This product features an AI voice function LED matrix panel that can be controlled via a mobile application, remote control, or AI voice commands. It allows for DIY text and patterns, including a variety of demon eye expressions and dynamic animations, to personalize your vehicle or space.

Fccemc LED Devil Eye Lights product overview showing the LED panel, smartphone app, remote control, and a motorcycle with the lights installed.

Figure 1: Fccemc LED Devil Eye Lights Product Overview

2. Safety Warnings

  • This product is a car decorative light with either a USB plug or a cigarette lighter plug.
  • Use the USB plug only for a USB port.
  • Use the cigarette lighter plug only for a cigarette lighter socket.
  • DO NOT mix plug and socket. Mixing them can cause a short circuit and damage the vehicle.
  • Install the device only when the vehicle is off.
  • Do not block airbags, the driver's view, or vehicle controls with the device or its wires.
  • This product is for decorative use only and is not a replacement for original vehicle lights.
  • Keep out of reach of children and pets to prevent accidents.
  • If the product becomes hot, damaged, or malfunctions, stop using it immediately.
  • Do not disassemble or get this product wet.

3. Package Contents

Please check the package for the following items:

  • 1 × LED matrix pixel panel
  • 1 × Controller with USB plug
  • 1 × Remote controller (battery not included)
  • 1 × Double-sided tape
  • 1 × Instruction manual (this document)

4. Specifications

Attribute Detail
Item Type AI Voice Function LED Matrix Panel
Waterproof Yes (Lamp board only; ensure socket waterproof for external installation)
Voltage USB 5V
Sizes Available
  • 16*32 (17cm × 7cm / 6.811in × 2.755in)
  • 16*64 (37cm × 9.2cm / 14.566in × 3.622in)
  • 16*96 (59.5cm × 12cm / 23.425in × 4.724in)
Image showing the three available sizes of the LED matrix pixel panel with dimensions: 17.3cm x 7cm, 37cm x 9.2cm, and 59.5cm x 12cm.

Figure 2: Available Product Dimensions

5. Setup and Installation

Follow these steps for easy and convenient installation:

  1. Prepare the Surface: Ensure the installation surface (e.g., inside a windshield) is clean and dry.
  2. Apply Double-Sided Tape: Tear off the protective film from the double-sided tape and apply it to the back of the LED matrix pixel panel.
  3. Attach the Panel: Carefully attach the pixel screen to the desired position, such as the inside of the glass on your motorcycle or car windshield. Ensure it does not obstruct your view or any vehicle controls.
  4. Connect Power: Connect the USB plug from the controller to a compatible USB 5V power source. Ensure the vehicle is off during installation.
  5. Bluetooth Pairing: After successful physical installation and power connection, proceed with Bluetooth pairing via the dedicated mobile application.
Installation steps for the LED panel: 1. Tear off protective film. 2. Attach pixel screen to the inside of the glass. 3. After successful Bluetooth pairing, it can be used.

Figure 3: Installation Guide

Important Note:

  • Connect the product plug to the corresponding socket (USB to USB, cigarette lighter to cigarette lighter socket). Do not force the plug into a mismatched socket.
  • If installing externally, pay attention to the waterproof treatment of the socket position. The lamp board itself has a waterproof function.

6. Operating Instructions

The LED Devil Eye Lights offer multiple control methods for dynamic customization:

6.1. Mobile App Control

Download the "Surplife" app from the App Store or Google Play. Once installed and paired via Bluetooth, the app allows you to:

  • DIY Text and Patterns: Create custom messages and designs.
  • Select Demon Eye Expressions: Choose from a variety of pre-set demon eye animations.
  • Dynamic Animations: Access multiple pre-loaded patterns and animations.
  • Playlist Function: Organize and play sequences of animations.
  • Rhythm Sync: Synchronize light patterns with music or sound.
  • Intelligent Voice Control: Utilize voice commands for various functions.
Screenshots of the Surplife app interface showing options for DIY picture, DIY animation, playlist, rhythm, and intelligent voice control.

Figure 4: Mobile App Interface and Features

6.2. Remote Control

Use the included remote control for quick access to basic functions such as turning the lights on/off and cycling through pre-set animations. (Note: Remote control requires batteries, not included).

6.3. AI Voice Control

Leverage the AI voice function to control the LED panel hands-free. Specific voice commands and setup details can be found within the mobile application's settings.

Video 1: Demonstration of LED Devil Eye Lights in action on a motorcycle, showcasing various animations and effects.

7. Maintenance

  • To clean the LED panel, gently wipe it with a soft, dry cloth.
  • Do not use harsh chemicals or abrasive cleaners.
  • Avoid bending or pulling the display with excessive force to prevent damage to the internal components.
  • Ensure the device does not get wet, especially the electrical connections, unless specifically designed for external, waterproof installation.

8. Troubleshooting

Common Issues and Solutions:

  • Device not powering on or functioning properly:
    • Ensure the USB plug is securely connected to a compatible 5V USB power source.
    • Do not use low-power USB power supplies such as computer USB ports or TV USB ports, as they may not provide sufficient power.
    • If the device still does not work properly, try replacing the power source with a high-power charger (e.g., a dedicated USB wall adapter).
  • Bluetooth connection issues:
    • Ensure Bluetooth is enabled on your mobile device.
    • Make sure the LED panel is powered on and within range.
    • Restart the app and try pairing again.
    • Consult the app's help section for specific pairing instructions.
  • Display appears distorted or damaged:
    • Avoid bending or pulling the display with force.
    • If physical damage is evident, discontinue use.

9. User Tips

  • Experiment with different DIY patterns and animations in the app to find unique looks for your vehicle.
  • Utilize the rhythm sync feature for an engaging visual experience during music playback.
  • For optimal visibility and safety, ensure the panel is placed where it is clearly visible to others but does not distract the driver or obstruct any essential vehicle functions.

10. Warranty and Support

For product support and inquiries, please contact the manufacturer or their authorized representative:

Manufacturer Information:

Guangzhou Zhengji Information Technology Co., Ltd
Address: Room 311, Building 2, Jiahe Creative Industry Park, Huangbian North Road, Baiyun District, Guangzhou City, Guangdong Province, China, 510440
Tel: 86-13535102100
E-mail: zj634216187@163.com

EU Authorized Representative:

Apex CE Specialists GmbH
Address: Grafenberger Allee 277, 40237 Dusseldorf, DE, 3
E-mail: Info@apex-ce.com
Tel: +49 21312066043

A PDF version of this user manual is available for download: User Manual (PDF)

11. Compliance Information

This product complies with the following directives and regulations:

  • EU RoHS (Restriction of Hazardous Substances) environmental directives
  • REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) environmental directives
  • LVD 2014/35/EU (Low Voltage Directive) electrical regulations
  • EMC 2014/30/EU (Electromagnetic Compatibility) regulations

This product is suitable for use in the EU market.

CE and E4 certification marks

Figure 5: CE and E4 Compliance Marks

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.