1. Product Overview
The NITECORE P27iX is a high-performance tactical flashlight designed for various missions and situations. It features a powerful 5000-lumen output, customizable beam patterns, and robust construction.

Image: NITECORE P27iX Tactical Flashlight highlighting its 6 key features: 1 For All, 2 Grips, 3 Beam Patterns, 4 Customizable Settings, 5000 Lumens, and 6 Stainless Steel High-Wear Parts.
2. Package Contents
- NITECORE P27iX Flashlight
- NITECORE NL2155HPi 21700 Rechargeable Li-ion Battery (5,500mAh)
- NTH27 Tactical Holster
- Clip
- Spare O-ring
- CR123 Battery Magazine
- Lanyard Charging Cable (USB-C)
3. Setup
3.1 Battery Installation and Removal
To install or remove the battery:
- Unscrew the tail cap of the flashlight.
- Insert the NITECORE NL2155HPi 21700 Li-ion battery with the positive (+) end facing towards the head of the flashlight. If using CR123 batteries, insert them into the provided battery magazine first.
- Remove any insulation film from the battery before first use.
- Screw the tail cap back on and tighten it securely.
Warning: Ensure the battery(s) is/are inserted with the positive end facing towards the head. The product will not work if the battery(s) is/are incorrectly inserted.
Battery Options
The P27iX is compatible with NITECORE 21700i Series batteries with an output over 15A and CR123/RCR123 batteries.
- DO NOT attempt to use the product to charge CR123/RCR123 batteries.
- The product is NOT compatible with conventional 21700/18650 batteries.
- When using CR123/RCR123 batteries, the maximum output is limited to 1,000 lumens.
3.2 Charging Function
The P27iX is equipped with an intelligent USB-C charging system. To charge the flashlight:
- Open the USB-C port cover located on the flashlight body.
- Connect the USB-C charging cable to the port and the other end to an external power supply (e.g., a USB adapter, power bank, or other USB charging device).
- During the charging process, the green battery indicators will gradually transition from flashing to a steady light to display the battery level.
- The product supports QC/PD fast charging.
- When the battery is fully charged, the product will automatically cease the charging process, and the green battery indicators will become steadily turned on.
Charging Time:
- Normal charging time for a 21700i Series Li-ion battery (5,500mAh) is approximately 3 hours (charged via a 5V/2A adapter).
- Fast charging time is approximately 2 hours (charged via a PD/QC adapter).
Note: The lighting function is available during charging, except for LUMIN SHIELD®, SEARCH, and STROBE modes.

Image: NITECORE P27iX flashlight connected via USB-C for fast charging.
3.3 Lockout / Unlock
The P27iX features a lockout switch (Rapid Lock™) to prevent accidental activation.
- Lockout (Default Setting): When the light is on or off, slide the Lockout Switch up to access Lockout Mode. All buttons will be unavailable to activate the flashlight.
- Unlock: In Lockout Mode, slide down the Lockout Switch to exit Lockout Mode.

Image: Close-up of the NITECORE P27iX Rapid Lock™ Lockout Switch, showing lock and unlock positions.
4. Operating Instructions
4.1 Power Indication
After the light is on, the green battery indicators will display the remaining battery power for 3 seconds and then automatically go off.
| Status of Indicators | Power Level |
|---|---|
| 4 Constant-on | 75% - 100% |
| 3 Constant-on | 50% - 75% |
| 2 Constant-on | 25% - 50% |
| 1 Constant-on | 10% - 25% |
| 1 Flashing | <10% (Recharge or replace battery) |
Enable / Disable Indicators: When the light is off, half press and hold the Tail Button, then quickly short press the SET Button three times to turn off both the battery indicators and level indicators. To enable the indicators, repeat the same steps.
4.2 Turn On / Brightness Level Adjusting / Turn Off
- Turn On (from OFF):
- Full press the Tail Button to access TURBO.
- Half press the Tail Button to switch between MID and TURBO.
- Half press the Tail Button to access MID. Half press again to switch between TURBO and MID.
- Short press the SET Button to access LOW. After turning on, short press SET within 3 seconds to cycle through: LOW → MID → HIGH → TURBO → Off.
- Turn Off (from ON): Full press the Tail Button.
4.3 Tactical Momentary Illumination
- From OFF:
- Half press and hold the Tail Button to access MID. Release to turn off.
- Full press and hold the Tail Button to access TURBO. Release to turn off.
- Half press and hold the Engage Button to access LUMIN SHIELD®. Release to turn off.
- Full press and hold the Engage Button to access STROBE. Release to turn off.
4.4 WARNING FLASH
- From OFF: Press and hold the SET Button until the WARNING FLASH is activated. Short press the SET Button to turn it off.
4.5 Beam Pattern Switching (Default Setting: Floodlight)
The P27iX offers three beam patterns: Spotlight, Mixed Light, and Floodlight.
- When LOW/MID/HIGH/TURBO is active (via SET Button): Press and hold the SET Button to cycle through: Spotlight → Mixed Light → Floodlight. Release to select and memorize the beam pattern. The selected pattern will apply to other brightness levels and WARNING FLASH.
- After turning on the light (via Tail Button): Press and hold the SET Button to cycle through: Spotlight → Mixed Light → Floodlight. Release to confirm and memorize the beam pattern for the current brightness level.

Image: NITECORE P27iX demonstrating its three beam patterns: Long-Distance Search (Long-Throw Light), Close-Range Lighting (Floodlight), and For General Use (Mixed Light).
4.6 Grip Options and Modes
The P27iX offers two grip options, each with specific operational modes.
Duty Grip
The Duty Grip supports Basic Mode and Professional Mode, providing access to TURBO, HIGH, MID, LOW, and WARNING FLASH.
- Basic Mode (Default Setting): Refer to Quick Start Guide.
- Mode Switching: From OFF, full press and hold the Tail Button. While holding, quickly press the SET Button three times. The light will flash once (Basic Mode) or twice (Professional Mode) to confirm the mode switch.
- Professional Mode:
- Turn On/Off: Short press SET from OFF to turn on; long press SET from ON to turn off.
- Brightness Level Adjusting: Short press SET to cycle through LOW → MID → HIGH → TURBO. (Features memory function).
- Beam Pattern Switching: When LOW/MID/HIGH/TURBO is active (via SET), short press SET then immediately press and hold to cycle through Spotlight → Mixed Light → Floodlight.

Image: NITECORE P27iX demonstrating the Duty Grip, built for daily patrol and extended use.
Tactical Grip
The Tactical Grip provides access to TURBO, HIGH, MID, LOW, and LUMIN SHIELD® / STROBE / SEARCH.
- Tactical Momentary Illumination: Refer to section 4.3.
- Beam Pattern Switching:
- Basic Mode: After turning on (via Tail Button), press and hold SET to cycle through Spotlight → Mixed Light → Floodlight.
- Professional Mode: After turning on (via Tail Button), short press SET then immediately press and hold to cycle through Spotlight → Mixed Light → Floodlight.

Image: NITECORE P27iX demonstrating the Tactical Grip, engineered for tactical suppression and close-quarters engagement.
4.7 Customizable Button Settings
The P27iX features customizable buttons for personalized operation.
- Engage Button Half-press-and-hold Configuration: From OFF, half press and hold the Engage Button, then long press the SET Button to cycle through: LUMIN SHIELD (Default) → STROBE → SEARCH. Release both buttons to set.
- Engage Button Full-press-and-hold Configuration: From OFF, full press and hold the Engage Button, then long press the SET Button to cycle through: LUMIN SHIELD (Default) → STROBE → SEARCH. Release both buttons to set.
- Tail Button Half Press / Half-press-and-hold Configuration: From OFF, half press and hold the Tail Button, then long press the SET Button to switch between LOW and MID (Default). Release both buttons to set.
- Tail Button Full Press / Full-press-and-hold Configuration: From OFF, full press and hold the Tail Button, then long press the SET Button to switch between HIGH and TURBO (Default). Release both buttons to set.
4.8 Reset to Factory Default
To restore the flashlight to its original factory settings:
- Enter Lockout Mode.
- Half or full press and hold the Engage Button without releasing it.
- Quickly short press the SET Button three or more times.
- The flashlight will flash three times to confirm the reset.
- Unlock the flashlight to use.
5. Maintenance
5.1 Advanced Temperature Regulation (ATR)
The integrated ATR technology regulates the output of the product according to its working condition and ambient environment to maintain the optimal performance, preventing overheating and prolonging lifespan.
5.2 Cleaning and Lubrication
Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-based lubricant to ensure smooth operation and water resistance.
6. Troubleshooting
If your NITECORE P27iX is not functioning as expected, please check the following common issues:
- Flashlight not turning on: Ensure the battery is correctly installed with the positive end towards the head. Check if the battery is charged. Ensure the lockout switch is in the unlock position.
- Dimming or flickering light: The battery might be low; recharge or replace it. Ensure battery contacts are clean.
- Buttons unresponsive: Check if the flashlight is in lockout mode. If so, unlock it.
- Charging issues: Ensure the USB-C cable is properly connected and the power source is functional. Check for any debris in the charging port.
If the problem persists, please refer to the Warranty/Support section for further assistance.
7. Specifications
7.1 General Specifications
| Attribute | Value |
|---|---|
| Model Number | P27iX |
| Light Source | 4 x NiteLab M515S LED |
| Max Output | 5000 Lumens |
| Max Throw | 430 meters |
| Max Beam Intensity | 46320 cd |
| Battery Capacity | 5500mAh (NL2155HPi) |
| Charging | USB-C Fast Charging (QC/PD up to 18W) |
| Main Material | Military-Grade 7075-T6 Aluminum Alloy |
| Finish | HA III Military Grade Hard-Anodized |
| IP Rating | IP68 (2 meters submersible) |
| Impact Resistance | 2 meters |
| Length | 143mm (5.63") |
| Head Diameter | 32mm (1.26") |
| Tube Diameter | 26mm (1.02") |
| Tail Width | 33mm (1.30") |
| Weight (Battery Excluded) | 124g (4.37 oz) |
| Weight (Battery Included) | 201g (7.09 oz) |
7.2 Technical Data (Runtime, Throw, Intensity)
Using a 21700i Series Li-ion Battery (5,500mAh)
| Mode | Output (Lumens) | Runtime | Throw (Meters) | Intensity (cd) |
|---|---|---|---|---|
| LUMIN SHIELD | 5000 | - | 300 | 22500 |
| SEARCH | 2500 | - | 430 | 46320 |
| TURBO (Floodlight) | 1500 | 2h 30min | 180 | 8100 |
| HIGH (Floodlight) | 400 | 6h | 85 | 1806 |
| MID (Floodlight) | 80 | 25h | 33 | 272 |
| LOW (Floodlight) | 15 | 100h | 14 | 49 |
| TURBO (Mixed Light) | 1500 | 2h 30min | 251 | 15750 |
| HIGH (Mixed Light) | 400 | 6h | 114 | 3249 |
| MID (Mixed Light) | 80 | 25h | 49 | 600 |
| LOW (Mixed Light) | 15 | 100h | 20 | 100 |
| TURBO (Spotlight) | 1500 | 2h 30min | 302 | 22800 |
| HIGH (Spotlight) | 400 | 6h | 163 | 6642 |
| MID (Spotlight) | 80 | 25h | 64 | 1024 |
| LOW (Spotlight) | 15 | 100h | 31 | 240 |
| WARNING FLASH | 1000 | - | - | - |
| STROBE | 5000 | - | - | - |
Note: Data measured with a NITECORE 21700i Series rechargeable Li-ion battery (5,500mAh), in accordance with ANSI/PLATO FL 1-2019 standards, at an ambient temperature of 26°C (79°F). LUMIN SHIELD®, STROBE, and SEARCH modes automatically adjust brightness to prevent overheating. Max outputs of LUMIN SHIELD®, SEARCH, and STROBE are only accessible when using NITECORE 21700i Series batteries with an output over 15A. Data tested without temperature regulation.
Using 2 x CR123 Batteries (1,600mAh)
| Mode | Output (Lumens) | Runtime | Throw (Meters) | Intensity (cd) |
|---|---|---|---|---|
| LUMIN SHIELD | 1000 | - | 135 | 4556 |
| SEARCH | 1000 | - | 242 | 14641 |
| TURBO (Floodlight) | 1000 | 1h | 135 | 4556 |
| HIGH (Floodlight) | 400 | 2h 30min | 85 | 1806 |
| MID (Floodlight) | 80 | 9h | 33 | 272 |
| LOW (Floodlight) | 15 | 40h | 14 | 49 |
| TURBO (Mixed Light) | 1000 | 1h | 203 | 10306 |
| HIGH (Mixed Light) | 400 | 2h 30min | 114 | 3249 |
| MID (Mixed Light) | 80 | 9h | 49 | 600 |
| LOW (Mixed Light) | 15 | 40h | 20 | 100 |
| TURBO (Spotlight) | 1000 | 1h | 242 | 14641 |
| HIGH (Spotlight) | 400 | 2h 30min | 163 | 6642 |
| MID (Spotlight) | 80 | 9h | 64 | 1024 |
| LOW (Spotlight) | 15 | 40h | 31 | 240 |
| WARNING FLASH | 1000 | - | - | - |
| STROBE | 1000 | - | - | - |
Note: Data measured with two CR123 batteries (1,600mAh), in accordance with ANSI/PLATO FL 1-2019 standards, at an ambient temperature of 26°C (79°F). LUMIN SHIELD®, STROBE, and SEARCH modes automatically adjust brightness. Data tested without temperature regulation.
8. User Tips
While no specific user reviews or Q&A were provided, general tips for tactical flashlights include:
- Always ensure your battery is fully charged before critical missions or extended use.
- Familiarize yourself with the customizable button settings to quickly access your preferred modes (e.g., STROBE, LUMIN SHIELD) for rapid response.
- Practice switching between different beam patterns (Spotlight, Mixed, Floodlight) to adapt to various environments.
- Regularly check the USB-C port for debris to ensure reliable charging.
- Consider using optional accessories like the NTH27 Tactical Holster for secure and quick access during operations.
9. Warranty and Support
9.1 Worldwide Warranty Service
All NITECORE® products are warranted for quality. If a product is Dead On Arrival (DOA) or defective, it can be exchanged for a replacement through a local distributor/dealer within 15 days of purchase.
After 15 days, all defective/malfunctioning NITECORE® products can be repaired free of charge within 60 months (5 years) from the date of purchase. Beyond 60 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts.
The warranty will be nullified if:
- The product(s) is/are broken down, reconstructed, and/or modified by unauthorized parties.
- The product(s) is/are damaged due to improper use.
- The product(s) is/are damaged due to battery leakage.
For the latest information on NITECORE® products and services, please contact a local NITECORE® distributor or send an email to: service@nitecore.com.
9.2 Important Safety Warnings
Please read and adhere to the following safety warnings to prevent injury or damage:
- This product is intended for use by adults aged 18 and over. Keep out of reach of children and pets.
- DO NOT stare directly into the light/laser beam or shine the light directly into eyes or reflective surfaces.
- The product generates massive heat during prolonged operation. Exercise caution. Avoid high brightness levels for extended periods to prevent burns.
- DO NOT cover the head or place objects near it during operation, as this may cause damage or accidents due to high temperatures.
- DO NOT use to illuminate flammable or explosive materials.
- DO NOT submerge the product in any liquid when it is hot.
- When storing or transporting, activate lockout mode, loosen the battery cap, or remove the battery to prevent accidental activation.
- DO NOT expose the product to temperatures above 60°C (140°F) for prolonged periods.
- Recharge the product or battery every 6 months if unused for a prolonged time.
- DO NOT disassemble or modify this product.
Battery Safety
- Improper use of the battery can result in severe damage or safety hazards.
- DO NOT use damaged batteries.
- DO NOT disassemble, puncture, cut, crush, or incinerate the battery, or short-circuit it.
- DO NOT use a battery if its discharge current does not match the device.
- DO NOT mix batteries of different brands or types.
- If any leakage, abnormal odor, or deformation is noticed, stop using the battery immediately and dispose of it properly according to local laws.