Important Safety Warnings
Please read this manual carefully before using the product and follow the instructions. This manual contains important safety information and operating instructions. Please keep it for future reference. In case of updates, please refer to the latest version available on the official website.
- This product is intended for use by adults aged 18 and over. Please keep this product out of reach of children.
- This product may contain small assembly parts. To minimize the risk of choking or suffocation, please ensure it is kept out of reach of children and pets.
- CAUTION! Possible dangerous radiation! DO NOT stare directly into the light/laser beam or shine the light directly into the eyes or any reflective surfaces!
- The product will generate massive heat during prolonged operation. Please exercise caution during use. It is recommended not to use high brightness levels for extended periods to prevent burns and product damage.
- DO NOT cover or place objects near the head of the product, as this may cause damage to the product or accidents due to high temperatures.
- DO NOT use the product to illuminate flammable or explosive materials, as the high heat may lead to combustion or explosion.
- Please use the product in a standard manner to avoid accidents in the event of product failure.
- DO NOT submerge the product into any liquid when it is hot. Doing so may cause irreparable damage to the light due to the difference of air pressure inside and outside.
- When the product is placed in an enclosed or flammable environment such as a pocket or backpack, or when it is left unused for an extended period, please turn off the product and take the following measures to avoid accidental activation, dangers caused by excessive heat, or damage from battery leakage: activate the lockout mode, loosen the battery cap, or remove the battery.
- DO NOT expose the product to temperatures above 60°C (140°F) for a prolonged time, as this poses a risk of battery explosion or combustion.
- Please recharge the product or battery every 6 months when left unused for a prolonged time.
- DO NOT disassemble or modify this product as doing so will cause damage to it and render the product warranty invalid. Please refer to the warranty section in the user manual for complete warranty information.
Product Overview
The NITECORE P27iX is a high-performance tactical flashlight designed for versatile use, offering customizable beam patterns and settings for various missions and situations. It features a powerful 5000-lumen output and robust construction.
Video: NITECORE P27iX Product Features and Demonstration. This video showcases the flashlight's tactical anti-grab design, STROBE READY™ function, LUMIN SHIELD®, long-distance search, customizable settings, quick glass breaking capability, and reinforced high-wear parts.
Key Features
- Utilizes 4 five-core M515S LEDs with a max output of 5,000 lumens.
- Peak beam intensity of 46,320cd and max throw of 430 meters.
- Offers 4 brightness levels: LUMIN SHIELD®, STROBE READY™, SEARCH and WARNING FLASH.
- Supports button customization for quick access to special modes and brightness levels.
- Two grip options available: Duty Grip for everyday use and Tactical Grip for tactical applications.
- Includes a NITECORE NL2155HPi 21700 Li-ion battery (5,500mAh) and is compatible with CR123/RCR123 batteries.
- A micro-textured orange peel reflector offers long range and wide angle lighting.
- Highly efficient constant current circuit provides a stable output for up to 100 hours.
- Level indicators and battery indicators available for indicating the current brightness level and remaining battery power.
- Designed with dual tail buttons and a side SET button.
- Intelligent Li-ion battery charging circuit with a USB-C charging port, supporting QC/PD fast charging up to 18W.
- Lockout switch (Rapid Lock™) available (Patent No. CN202322748377.2; US Patent No. US12203638B1; EU Patent No. EP4459174A1).
- Features a high-strength stainless steel strike bezel with silicon nitride ceramic tips, capable of breaking glass quickly.
- Incorporated Advanced Temperature Regulation (ATR) module (Patent No. ZL201510534543.6).
- Constructed from 7075-T6 aero grade aluminum alloy with HA III military grade hard-anodized finish.
- Waterproof and dustproof rating in accordance with IP68 (2 meters submersible).
- Impact resistant to 2 meters.
Package Contents
The NITECORE P27iX package includes:
- NITECORE NL2155HPi 21700 Rechargeable Li-ion Battery (5,500mAh)
- NTH27 Tactical Holster
- Clip
- Spare O-ring
- CR123 Battery Magazine
- Lanyard Charging Cable
Optional Accessories

Image: Optional accessories for the P27iX. These include the NTH27 Tactical Holster, Lanyard Charging Cable, Detachable Two-Way Clip, NDF32 Diffuser, GM02 Pro Rail Mount, and NTW32 Traffic Wand. Optional accessories are sold separately.
Battery Information
Battery Installation / Removal
As illustrated, after unscrewing the battery cap, insert/remove the battery(s) and screw to tighten the tail cap. Please remove the insulation film before first use.
Warning: Ensure the battery(s) is/are inserted with the positive end facing towards the head. The product will not work if the battery(s) is/are incorrectly inserted.

Image: Quick Start Guide diagram illustrating the location of the SET Button, Tail Button, Engage Button, and the Lockout Switch. It also shows the correct orientation for 21700 i-Series battery installation and the CR123 battery magazine.
Battery Options
The product is only compatible with NITECORE 21700 i Series batteries with an output over 15A and CR123/RCR123 batteries.
- DO NOT attempt to use the product to charge CR123/RCR123 batteries.
- The product is NOT compatible with conventional 21700/18650 batteries.
- When using CR123/RCR123 batteries, the maximum output is limited to 1,000 lumens.
Charging Function
The product is equipped with an intelligent charging system. Use the USB cable to connect an external power supply (e.g., an adapter, power bank or other USB charging devices) to the charging port to begin the charging process.
- The product supports QC/PD fast charging. During the charging process, the green battery indicators will gradually transition from flashing to a steady light to display the battery level.
- When the battery is fully charged, the product will automatically cease the charging process and the green battery indicators will become steadily turned on to inform the user.
- The lighting function is available during charging, except for LUMIN SHIELD®, SEARCH, and STROBE.
- The normal charging time for a 21700 i Series Li-ion battery (5,500mAh) is approx. 3 hours (charged via a 5V/2A adapter); the fast charging time is approx. 2 hours (charged via a PD/QC adapter).

Image: The P27iX flashlight connected to a USB-C cable for 18W fast charging. The battery indicator shows charging status.
Power Indication
After the light is on, the green battery indicators will display the remaining battery power and automatically go off after 3 seconds.
Low Power Indication
When the battery power is below 10%, a green power indicator will flash, while the output may dim or the flashlight may become unresponsive. Please recharge the product or replace the battery as soon as possible.
Enable / Disable Indicators
When the light is off, while half pressing and holding the Tail Button, quickly short press the SET Button three times to turn off both the battery indicators and level indicators. To enable the indicators, repeat the same steps.
| Status of Indicators | Power Level |
|---|---|
| 4 Constant-on | 75%-100% |
| 3 Constant-on | 50% - 75% |
| 2 Constant-on | 25% - 50% |
| 1 Constant-on | 10% - 25% |
| 1 Flashing | <10% (Please recharge the product or replace the battery as soon as possible) |
Quick Start Guide
The following operations are based on factory default settings. If any settings have been changed, you may restore the product to factory defaults before proceeding.

Image: Quick Start Guide diagram illustrating the main buttons and basic operation modes for the P27iX flashlight.
Lockout / Unlock
Lockout (Default Setting): When the light is on/off, slide the Lockout Switch (Rapid Lock™) up to access Lockout Mode. The lock icon can be seen below the Lockout Switch (Rapid Lock™). All buttons are unavailable to activate the flashlight in Lockout Mode.
Unlock: In Lockout Mode, slide down the Lockout Switch (Rapid Lock™) to exit Lockout Mode.
Turn On / Brightness Level Adjusting
- When the light is off, full press the Tail Button to access TURBO. Half press the Tail Button to switch between MID and TURBO.
- When the light is off, half press the Tail Button to access MID. Half press the Tail Button again to switch between TURBO and MID.
- When the light is off, short press the SET Button to access LOW. After turning on the light, short press the SET Button within 3 seconds to cycle through the following sequence: LOW – MID – HIGH – TURBO – Off.
Note: When the light is turned on, the corresponding blue level indicators will light up and automatically go out after 3 seconds of no operation.
Turn Off
When the light is on, full press the Tail Button to turn it off.
Tactical Momentary Illumination
- When the light is off, half press and hold the Tail Button to access MID. Release to turn it off.
- When the light is off, full press and hold the Tail Button to access TURBO. Release to turn it off.
- When the light is off, half press and hold the Engage Button to access LUMIN SHIELD®. Release to turn it off.
- When the light is off, full press and hold the Engage Button to access STROBE. Release to turn it off.

Image: Diagram illustrating how to activate MID, TURBO, LUMIN SHIELD, and STROBE modes using half press and full press of the Tail Button and Engage Button.
WARNING FLASH
When the light is off, press and hold the SET Button until the WARNING FLASH is activated. Short press the SET Button to turn the light off.
Detailed Operation Guide
Grip Options
The P27iX offers two distinct grip options to suit different operational needs:

Image: Flashlight held in a tactical grip, demonstrating secure handling.

Image: Flashlight held in a duty grip, suitable for daily patrol and extended use. Brightness levels shown are LOW (15 Lumens), MID (80 Lumens), HIGH (400 Lumens), TURBO (1,500 Lumens), and WARNING FLASH.
Duty Grip
The Duty Grip supports Basic Mode and Professional Mode, providing access to TURBO, HIGH, MID, LOW and WARNING FLASH. Users can select the desired mode.
1. Basic Mode (Default Setting): Please refer to the Quick Start Guide.
2. Mode Switching: When the light is off, full press and hold the Tail Button. While holding it, quickly press the SET Button three times. The light will flash once (Basic Mode) or twice (Professional Mode) to confirm that the mode has been successfully switched.
3. Professional Mode:
- On: When the light is off, short press the SET Button to turn it on.
- Off: When the light is on, long press the SET Button to turn it off.
- Brightness Level Adjusting: When the light is on, short press the SET Button to cycle through the following sequence: LOW – MID – HIGH – TURBO.
Note: In Professional Mode, the product features brightness level memory function. When reactivated, it will automatically access the previous memorized brightness level.
Tactical Grip
The Tactical Grip provides access to TURBO / HIGH, MID / LOW and LUMIN SHIELD® / STROBE / SEARCH.
1. For instructions on turning on/off and tactical momentary illumination, please refer to the Quick Start Guide.
Beam Pattern Switching (Default Setting: Floodlight)
The P27iX offers three distinct beam patterns to adapt to various missions:

Image: Three Beam Patterns: Long-Distance SEARCH (Long-Throw Light, 302m, 1500-Lumen TURBO), Close-Range Lighting (Floodlight, 115°), and For General Use (Mixed Light, 251m, 115°). These patterns can be customized for LOW/MID/HIGH/TURBO levels.
- When LOW/MID/HIGH/TURBO is activated by short pressing the SET Button, press and hold the SET Button to cycle through the following sequence: Spotlight - Mixed Light - Floodlight. Release the button to select and memorize the beam pattern. The selected beam pattern will automatically apply to other brightness levels and WARNING FLASH. When reactivated, the product will automatically access the previously memorized beam pattern.
- After turning on the light by half pressing or full pressing the Tail Button, press and hold the SET Button to cycle through the following sequence: Spotlight - Mixed Light - Floodlight. Release to confirm and memorize the beam pattern for the current brightness level. When the brightness level is reactivated, the product will automatically access the previously memorized beam pattern.
Customizable Button Settings
The product features customizable buttons. Both half and full-press-and-hold of the Engage Button can be configured independently to directly access LUMIN SHIELD®, STROBE or SEARCH. Both half press and half-press-and-hold of the Tail Button can be configured to directly access LOW or MID, while full press and full-press-and-hold of the Tail Button can be configured to directly access HIGH or TURBO.
- Engage Button Half-press-and-hold Configuration: When the light is off, while half pressing and holding the Engage Button, long press the SET Button to cycle through the following sequence: LUMIN SHIELD (Default Setting) - STROBE – SEARCH. Once the desirable output is selected, release both buttons. The light will memorize this setting for half-press-and-hold of the Engage Button.
- Engage Button Full-press-and-hold Configuration: When the light is off, while full pressing and holding the Engage Button, long press the SET Button to cycle through the following sequence: LUMIN SHIELD – STROBE (Default Setting) – SEARCH. Once the desirable output is selected, release both buttons. The light will memorize this setting for full-press-and-hold of the Engage Button.
- Tail Button Half Press / Half-press-and-hold Configuration: When the light is off, while half pressing and holding the Tail Button, long press the SET Button to switch between LOW and MID (Default Setting). Once the desirable output is selected, release both buttons. The light will memorize this setting for both half press and half-press-and-hold of the Tail Button.
- Tail Button Full Press / Full-press-and-hold Configuration: When the light is off, while full pressing and holding the Tail Button, long press the SET Button to switch between HIGH and TURBO (Default Setting). Once the desirable output is selected, release both buttons. The light will memorize this setting for both full press and full-press-and-hold of the Tail Button.
Reset to Factory Default
While in Lockout Mode, half or full press and hold the Engage Button without releasing it. Then, quickly short press the SET Button three times or more. The flashlight will flash three times to confirm that the reset has been successfully completed. Unlock the light to use.
Technical Specifications
| Attribute | Value |
|---|---|
| Brand Name | NITECORE |
| Model Number | P27iX |
| Item Type | FLASHLIGHTS |
| Flashlight Type | flashlight |
| Light Source | LED bulbs (4 x NiteLab M515S LED) |
| Lumen | 5000 lumens |
| Lighting Distance | 200-500 m (Max Throw: 430 m) |
| Max Beam Intensity | 46320cd |
| Wattage | 18 |
| Switch Mode | High/Middle/Low |
| Waterproof | Yes (IP68) |
| Body Material | Aluminum alloy (Military-Grade 7075-T6) |
| Charger | Rechargeable (USB-C) |
| Is Batteries Included | Yes |
| Certification | CE |
| Origin | Mainland China |
| High-concerned chemical | None |
| Attribute | Value |
|---|---|
| Length | 143mm (5.63") |
| Head Diameter | 32mm (1.26") |
| Tube Diameter | 26mm (1.02") |
| Tail Width | 33mm (1.30") |
| Weight (Battery and Accessory Excluded) | 124g / 4.37 oz |
| Weight (Battery Included) | 201g / 7.09 oz |
Performance Data (Using a 21700 i Series Li-ion Battery)
| FL1 STANDARD | LUMIN SHIELD® | SEARCH | TURBO | Floodlight HIGH | Floodlight MID | Floodlight LOW | Mixed Light TURBO | Mixed Light HIGH | Mixed Light MID | Mixed Light LOW | Spotlight TURBO | Spotlight HIGH | Spotlight MID | Spotlight LOW | WARNING FLASH | STROBE |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lumens | *5,000 | *2,500 | 1,500 | 400 | 80 | 15 | 1,500 | 400 | 80 | 15 | 1,500 | 400 | 80 | 15 | 1,000 | *5,000 |
| Runtime | - | - | 2h 30min | 6h | 25h | 100h | 2h 30min | 6h | 25h | 100h | 2h 30min | 6h | 25h | 100h | - | - |
| Distance | 300m | 430m | 180m | 85m | 33m | 14m | 251m | 114m | 49m | 20m | 302m | 163m | 64m | 31m | - | - |
| Intensity | 22,500cd | 46,320cd | 8,100cd | 1,806cd | 272cd | 49cd | 15,750cd | 3,249cd | 600cd | 100cd | 22,800cd | 6,642cd | 1,024cd | 240cd | - | - |
| Impact Resistance | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Waterproof | IP68 (2 Meters Submersible) | |||||||||||||||
Note: The stated data is measured by using a 21700 i Series rechargeable Li-ion battery (5,500mAh), in accordance with the international flashlight testing standards ANSI/PLATO FL 1-2019, at an ambient temperature of 26°C (79°F) from the NITECORE Lab. The data may vary in real world use due to different battery usage or environmental conditions. When LUMIN SHIELD® / STROBE / SEARCH is activated, the flashlight will automatically adjust the brightness to prevent overheating and prolong the lifespan of the flashlight. To restore the previous brightness, simply reactivate LUMIN SHIELD® / STROBE / SEARCH. The max outputs of LUMIN SHIELD®, SEARCH, and STROBE are only accessible when using NITECORE 21700 i Series batteries with an output over 15A. The data is tested without the temperature regulation.
Performance Data (Using 2 x CR123 Batteries)
| FL1 STANDARD | LUMIN SHIELD® | SEARCH | TURBO | Floodlight HIGH | Floodlight MID | Floodlight LOW | Mixed Light TURBO | Mixed Light HIGH | Mixed Light MID | Mixed Light LOW | Spotlight TURBO | Spotlight HIGH | Spotlight MID | Spotlight LOW | WARNING FLASH | STROBE |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lumens | *1,000 | *1,000 | 1,000 | 400 | 80 | 15 | 1,000 | 400 | 80 | 15 | 1,000 | 400 | 80 | 15 | 1,000 | 1,000 |
| Runtime | - | - | 1h | 2h 30min | 9h | 40h | 1h | 2h 30min | 9h | 40h | 1h | 2h 30min | 9h | 40h | - | - |
| Distance | 135m | 242m | 135m | 85m | 33m | 14m | 203m | 114m | 49m | 20m | 242m | 163m | 64m | 31m | - | - |
| Intensity | 4,556cd | 14,641cd | 4,556cd | 1,806cd | 272cd | 49cd | 10,306cd | 3,249cd | 600cd | 100cd | 14,641cd | 6,642cd | 1,024cd | 240cd | - | - |
| Impact Resistance | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Waterproof | IP68 (2 Meters Submersible) | |||||||||||||||
Note: The stated data is measured by using two CR123 batteries (1,600mAh), in accordance with the international flashlight testing standards ANSI/PLATO FL 1-2019, at an ambient temperature of 26°C (79°F) from the NITECORE Lab. The data may vary in real world use due to different battery usage or environmental conditions. When LUMIN SHIELD® / STROBE / SEARCH is activated, the flashlight will automatically adjust the brightness to prevent overheating and prolong the lifespan of the flashlight. To restore the previous brightness, simply reactivate LUMIN SHIELD® / STROBE / SEARCH. The data is tested without the temperature regulation.

Image: Precision Series Comparison Table. This table compares the P27iX with other models (P20iX, P17iX, P10iX) based on LED, Max Output, Max Throw, Battery Capacity, Charging, Button configuration, Grip, Main Material, IP Rating, Length, Head Diameter, Weight, and features like LUMIN SHIELD®, SEARCH, STROBE, Beam Pattern Switching, WARNING FLASH, Rapid Lock™, Strike Bezel, and Glass-Breaking Tip.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-based lubricant.
Advanced Temperature Regulation (ATR)
The integrated ATR technology regulates the output of the product according to the working condition and ambient environment to maintain the optimal performance.
User Tips
- For optimal performance, ensure the battery is fully charged before each use.
- Regularly clean the USB-C charging port to prevent dust and debris from affecting charging efficiency.
- Familiarize yourself with the customizable button settings to quickly access your preferred modes in high-stress situations.
- Always engage the lockout switch when storing or transporting the flashlight to prevent accidental activation.
Warranty Information
All NITECORE® products are warranted for quality. Any DOA / defective product can be exchanged for a replacement through a local distributor/dealer within 15 days of purchase. After that, all defective / malfunctioning NITECORE® products can be repaired free of charge within 60 months from the date of purchase. Beyond 60 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts.
The warranty will be nullified if:
- the product(s) is/are broken down, reconstructed and/or modified by unauthorized parties;
- the product(s) is/are damaged due to improper use.
- the product(s) is/are damaged due to battery leakage.
For the latest information on NITECORE® products and services, please contact a local NITECORE® distributor or send an email to service@nitecore.com.
A user manual PDF is available for download from the official seller. Refer to the product page for the link.