PINTUDY ZHCIY

Contents

User Manual

PINTUDY 4.2V Rechargeable Cordless Electric Screwdriver Mini Drill Set

Model: ZHCIY | Straight & Gun Grip | 1500mAh Li-ion | USB Charging | One-Key Reverse

1. Safety Instructions

WARNING: Read all safety warnings and instructions before use.

  • Work area safety - Keep work area clean and well lit.
  • Personal safety - Stay alert, use safety glasses. Do not use while tired or under influence.
  • Tool use - Do not use for purposes other than screw driving. Disconnect battery when changing bits.
  • Battery safety - Do not short-circuit or expose to fire. Use only USB 5V chargers.
  • Children - Keep out of reach of children.

2. Product Specifications

ParameterValue
ModelZHCIY
Voltage4.2V DC
Battery TypeLithium-ion (Li-ion)
Battery Capacity1500mAh
Charging Input5V USB (Type-A or Micro-USB typical)
Grip ModesStraight grip + Gun grip (rotating body)
Direction ControlOne-key forward / reverse / lock
Rated Torque3.6Nm
No-Load Speed1800rpm
WeightApprox. 300g
Dimensions (straight mode)Length approx. 18-20cm
MaterialABS + metal components

3. Product Features

  • 2-in-1 Design: Rotating fuselage converts between straight grip (for precision) and gun grip (for torque).
  • High-Capacity Lithium Battery: 1500mAh Li-ion battery ensures long runtime with no memory effect.
  • USB Fast Charging: Conveniently charge via phone charger, laptop, power bank, or car USB port.
  • One-Key Reverse Switch: Easy toggle for forward, lock, and reverse functions.
  • Lightweight & Durable: Compact body reduces hand fatigue during extended use.
  • High-Precision Copper Core Motor: Provides strong power and high temperature resistance.
  • Integrated LED Lighting: Allows for work in dark environments.

4. Setup

4.1 Charging the Battery

  1. Connect the screwdriver to any standard USB port (5V) using the included USB cable.
  2. The charging indicator (if present) will light up.
  3. Full charge time is approximately 1.5-2 hours (depends on battery level).
  4. Do not charge unattended for long periods.
Screwdriver with USB charging port highlighted and Li-ion battery indicator.

Figure 1: USB Fast Charging port and Li-ion battery indicator.

4.2 Installing / Changing Bits

  1. Pull the chuck collar forward (if quick-release) or use the magnetic chuck.
  2. Insert the screwdriver bit until it locks.
  3. Ensure the bit is fully seated before use.

Video 1: Demonstration of grip change, bit insertion, drilling, screwing, and USB charging.

5. Operating Instructions

5.1 Changing Grip Mode

  1. Press the "PUSH" button on the side of the fuselage.
  2. Rotate the upper body 180° until it clicks into the new position.
  • Straight grip: For working in narrow spaces or vertical screw driving.
  • Gun grip: For higher torque when driving screws into wood or harder materials.
Screwdriver transforming from straight grip to gun grip with a 'PUSH' button indicated.

Figure 2: One-key fast deformation from straight grip to gun grip.

5.2 Direction Switch

The direction switch controls the rotation of the screwdriver and also acts as a lock.

  • Forward (right): Select this position to drive screws in.
  • Lock (center): The center position locks the trigger to prevent accidental start.
  • Reverse (left): Select this position to remove screws.
Close-up of the one-key reverse turn switch with 'reversal', 'lock', and 'forward' indicators.

Figure 3: One-key reverse turn switch (forward, lock, reverse).

6. Maintenance & Care

  • Cleaning: Wipe the tool with a dry cloth. Do not use water or chemical solvents.
  • Battery Care: Recharge before complete discharge. Store at room temperature (0-40°C).
  • Storage: Keep in a dry place. Remove from USB charger when fully charged.
  • Service: No user-serviceable parts inside. Refer to dealer if malfunction.

7. Troubleshooting

ProblemPossible CauseSolution
Tool does not runBattery dischargedCharge via USB
Low torqueWrong grip modeSwitch to gun grip for more leverage
Direction switch not workingSwitch in lock positionMove to forward or reverse
Charging slowUsing low-power USB portTry a 5V/2A charger
Bit falls outNot fully insertedPush bit all the way in

8. Applications

This electric screwdriver is suitable for a variety of tasks, including:

  • Furniture assembly (e.g., IKEA furniture)
  • Electronics repair (e.g., computers, phones, toys)
  • General household screw driving
  • Hobby and craft projects
  • Automotive interior trim screws
Full 47-piece screwdriver kit in its carrying case, showing various bits and accessories.

Figure 4: The 47-piece kit, ideal for various applications.

9. User Tips

  • For large screws or dense material, always use the gun grip mode for maximum torque.
  • When working with delicate electronics, use the straight grip for better control and lower force.
  • To prevent stripping screw heads, release the trigger immediately once the screw is tight.
  • Keep the various batch heads organized in the provided case for easy access and to prevent loss.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

For additional resources, you may refer to the official user manual PDF: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.