1. Introduction
The NOPARDE ZSDLQ Custom Floor Sign Projector Light is a versatile projection lamp designed for displaying custom signs, warnings, and directional indicators on floors or walls. It is suitable for various indoor and outdoor environments such as shopping malls, hotels, hospitals, and factories. This projector supports both static and rotatable projection modes and offers high brightness and durability.
This manual provides essential information for the safe and effective installation, operation, and maintenance of your projector light.
2. Safety Information
- Power Off Before Maintenance: Always disconnect the power supply before performing any installation, maintenance, or lamp chip replacement to prevent electric shock.
- Waterproof Precautions: Non-waterproof lamps are not designed for outdoor use where they may be exposed to rain. If installed in such conditions, product failure due to rain will void the warranty. For waterproof models, ensure the "waterproof fixed iron ring" is tightened to prevent water seepage and maintain projection quality.
- Professional Service: If you encounter any issues with the lamp, contact customer service immediately. Do not attempt to disassemble or repair the unit yourself, as this will void the warranty.
- Lamp Temperature: The lamp sheet can become very hot when broken or after use. Allow the lamp to cool down completely before attempting to replace the lamp chip.
- Proper Installation: Ensure the projector is securely fixed according to the installation instructions to prevent it from falling.
- Projection Clarity Adjustment: When adjusting the lens for clarity, be careful not to let the lens fall.
The Civil Code stipulates that managers of public places such as hotels, shopping malls, banks, stations, and entertainment venues have an organizational duty to prevent and control risks, including those from unmarked steps or wet floors.
Image: Projected 'Mind The Step' warning sign on stairs, indicating potential tripping hazards.
Image: Examples of various projected signs for guidance and safety, such as 'Toilet', 'Caution Wet Floor', 'Exit', and 'Parking Lot'.
3. Setup and Installation
The NOPARDE ZSDLQ projector is designed for self-contained installation, typically mounted on a wall or ceiling.
3.1. Mounting the Projector
- Identify a suitable location for projection, considering the desired projection distance and imaging diameter (refer to Section 3.3).
- Use the provided screws to securely fix the bracket to the wall or ceiling.
- Attach the projector to the mounted bracket.
Image: One-Step Installation Solution diagram, illustrating screw fixing and adjustment capabilities.
3.2. Adjusting Projection Angle
The projector offers flexible adjustment for optimal positioning:
- Vertical Adjustment: The projector can be adjusted up and down by 180 degrees.
- Horizontal Adjustment: The projector can be rotated 360 degrees horizontally.
- To adjust the angle, loosen the bracket counter-clockwise, position the projector as desired, and then tighten the bracket.
Image: 360° No Dead Angle Adjustment diagram, showing how to adjust the projector's position.
3.3. Projection Distance and Imaging
The imaging diameter of the projection changes with distance. The projector has an imaging ratio of 1:0.3. For custom patterns, contact customer service for size recommendations based on your specific needs.
Image: Projection distance and imaging diagram, showing the relationship between distance and projected image size.
4. Operating Instructions
4.1. Powering On and Initial Setup
- Plug the projector into a power outlet (AC100-240V). The light will turn on automatically.
- If your model supports remote control, ensure it is paired correctly.
4.2. Adjusting Projection Clarity
To achieve a clear projection:
- Slowly twist the lens outward.
- Observe the clarity of the projected pattern.
- Continue twisting until the pattern appears clear and sharp. Be careful not to let the lens fall.
- It is recommended to perform an indoor test first and adjust the lens after installation. Outdoor debugging should not be carried out during the day.
4.3. Adjusting Pattern Direction and Rotation
The projector supports both static and rotating projection modes. The pattern direction can be adjusted by manually turning the gear on the projector.
- For static projection, ensure the rotation feature is disabled (if applicable to your model).
- For rotating projection, the projector will continuously rotate the image.
Video: Demonstration of the projector displaying various signs in different environments, showcasing both static and rotating projections.
4.4. Customizing Content
The projector allows for customizable content, suitable for various scenarios. This includes:
- Text and poetry projection
- Directional signage
- Industrial safety tips
- Company or store logos
A free monochrome slide is typically included with purchase, along with 1-on-1 free design service for quick proofing. Additional slide styles and colors are available.
Image: Examples of customizable content, such as text, directional signage, industrial safety tips, and company/store logos.
Image: Slide style reference and optional colors for customizing your projection.
5. Maintenance
5.1. Replacing Lamp Chips
Follow these steps carefully when replacing the lamp chip:
- Power Off: Ensure the projector is completely powered off and unplugged.
- Cool Down: If the lamp was recently in use or broken, allow it to cool down completely before handling.
- Remove Radiator: Carefully remove the radiator component.
- Remove Fixing Ring: Remove the fixing ring that holds the lamp piece in place.
- Replace Lamp Piece: Replace the old lamp piece with a new one. Ensure the black side of the light sheet faces outward.
- Secure with Fixing Ring: Fix the new lamp piece with the fixing ring to prevent it from falling.
- Reattach Radiator: Screw the radiator back into place.
Image: Detailed steps for replacing lamp chips, including precautions and assembly order.
6. Troubleshooting
If the projector is not functioning as expected, consider the following common issues:
- No Power: Ensure the power cable is securely plugged into both the projector and a working power outlet. Check if the outlet has power.
- No Projection: Verify that the lamp chip is correctly installed and not damaged. If recently replaced, ensure the fixing ring is secure.
- Blurry Projection: Adjust the lens by slowly twisting it outward until the image becomes clear. Ensure the projection surface is flat and clean.
- Pattern Not Rotating: If your model supports rotation, check the settings or controls to ensure the rotation feature is enabled.
- Faint or Dim Projection: The lamp chip may be nearing the end of its service life or may be dirty. Consider replacing the lamp chip or cleaning the lens.
For persistent issues, refer to the official user manual PDF or contact customer support.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | NOPARDE |
| Model Number | ZSDLQ |
| Item Type | Advertising Light |
| Installation Method | Self-contained |
| Power Source | AC |
| Supply Voltage | AC100-240V |
| Input Power | 15-55W |
| Working Voltage | DC24-36V |
| Luminous Flux | 2000-82000 |
| Is Bulbs Included | Yes |
| Certification | CE |
| Origin | Mainland China |
| Use | For indicates guidance. |
| High-concerned chemical | None |
| Product Color | Black, Silver |
| Color Rendering Index | ≥85 Ra |
| Color Temperature Index | 8000-8500 K |
| Remote Control Distance | 20m Remote Control Through Walls |
| Projection Status | Static or Rotation capable |
| Service Life | 50000 H |
| Work Environment | -40~60°C |
| Lamp Diameter | 37mm |
| Package Dimensions (L x W x H) | 36cm x 22cm x 17cm |
| Package Weight | 2.0 kg |
Image: Product parameters and dimensions.
Image: Precision parts and internal structure of the projector.
8. User Tips
- For best visibility, ensure the projection area is free from direct strong light sources.
- Regularly clean the projector lens with a soft, dry cloth to maintain optimal image clarity.
- When designing custom slides, consider high-contrast colors for maximum impact, especially in brighter environments.
- Test the projection in the intended environment before final installation to confirm desired size and clarity.
9. Warranty and Support
The NOPARDE ZSDLQ projector light comes with a manufacturer's warranty. Please refer to the official documentation for specific warranty terms and conditions.
For further assistance, technical support, or to view the complete user manual, please refer to the official PDF document provided by the manufacturer. The user manual (PDF) can be accessed via the seller's product page or by contacting customer service.