HUANANZHI B250 D4

Contents

HUANANZHI B250 D4 M-ATX Motherboard User Manual

Model: B250 D4

1. Introduction

The HUANANZHI B250 D4 M-ATX Motherboard is designed to support Intel LGA 1151 platform processors from the 6th, 7th, 8th, and 9th generations. It features dual-channel DDR4 memory support, M.2 NVME and M.2 WIFI slots, and a comprehensive set of I/O ports for various computing needs.

1.1 Key Features

  • CPU Socket: Supports Intel LGA 1151 processors (i7/i5/i3, Pentium, Celeron from 6th/7th/8th/9th generations, including Notebook Magic Modified Processors).
  • Memory: 2 x DDR4 DIMM slots, supporting up to 32GB dual-channel memory at 2666/2400/2133MHz (Non-ECC). Actual memory data rate depends on CPU type and DRAM module.
  • Storage: 4 x SATA3.0 interfaces (max transfer speed 6GB/s).
  • Expansion Slots: 1 x PCI Express 3.0 x16, 1 x PCI Express 3.0 x1, 1 x M.2 NVME PCIe 3.0X4 (key M) for 2242/2260/2280 SSDs, 1 x M.2 WIFI NGFF slot.
  • Audio: Realtek Audio Transcoder, 5.1 Channel High Fidelity Audio (Front Out/Speaker Out, Microphone Input, Audio Input).
  • Network: 1 x Realtek PCIe Gigabit LAN.
  • Rear I/O Ports: 1 x PS/2 mouse/keyboard universal port, 4 x USB2.0, 2 x USB3.0, 1 x RJ45 network interface, 1 x VGA, 1 x HDMI-Compatible, 1 x DP.
  • Power Interface: 24-pin + 8-pin.
  • Fan Interface: 2.
  • PCB: 4 layers, 5-phase power supply.
  • Form Factor: 215*168MM M-ATX.

2. Safety Precautions

To ensure a successful computer assembly and prevent damage, please observe the following safety guidelines:

  • Electrostatic Discharge (ESD): Components in this package are susceptible to ESD damage. Always discharge your body static by touching other metal objects before handling the motherboard.
  • Handling: Hold the motherboard by its edges. Avoid touching sensitive components or circuits.
  • Storage: When not in use, store the motherboard in an anti-static container or on an anti-static pad.
  • Connections: Ensure all components are firmly connected. Loose connections can prevent the computer from recognizing components or starting up.
  • Pre-Power On Check: Before powering on the computer, verify that all parts inside the case are firmly connected and there are no loose screws or metal components.
  • Installation Completion: Do not start the computer before installation is complete. Doing so may cause permanent damage to components or injury.
  • Power Management: Before installing or disassembling any computer component, switch off the power and unplug the power cable from the socket.
  • Environment: Keep the motherboard away from moisture.
  • Power Supply: Ensure your power outlet provides the correct voltage for your power supply unit.
  • Cables: Arrange power cables to prevent tripping hazards and avoid placing objects on them.
  • Professional Assistance: If you require assistance during installation, contact professional after-sales technical support.
  • Damage Inspection: If the motherboard has liquid penetration, is exposed to moisture, does not work despite following instructions, has fallen and been damaged, or shows clear signs of damage, have it checked by a service technician.

3. Package Contents

Please verify the package contents upon purchase. If there is any damage or missing accessories, contact your vendor immediately.

  • 1 x HUANANZHI B250-D4 Motherboard
  • 1 x SATA Data Cable
  • 1 x User Manual (this document)
  • 1 x Warranty Card
Motherboard and packaging
Figure 3.1: HUANANZHI B250 D4 Motherboard with its packaging.

4. Motherboard Layout

This section provides an overview of the motherboard's components and connectors.

HUANANZHI B250 D4 Motherboard overview
Figure 4.1: HUANANZHI B250 D4 Motherboard with key features highlighted.

4.1 Rear I/O Panel

The rear I/O panel provides various ports for connecting external devices.

Rear I/O ports of the motherboard
Figure 4.2: Detailed view of the Rear I/O Panel.

The Rear I/O Panel includes:

  • 2 x PS/2 Ports (for mouse and keyboard)
  • 1 x VGA Port
  • 1 x HDMI Port
  • 1 x DisplayPort (DP)
  • 4 x USB 2.0 Ports
  • 2 x USB 3.0 Ports
  • 1 x RJ45 LAN Port
  • 3 x Audio Jacks (Line In, Line Out, Microphone)

4.1.1 LAN Port Status Indicators

Table 4.1: LAN Port Status Indicators
Status Description Speed Signal Description
Turn Off Network Not Connected Turn Off Transmission rate 10 Mbps
Yellow Network Connected Green Transmission rate 100 Mbps
Flicker Network In Use Orange Transmission rate 1 Gbps

4.1.2 Audio Port Configuration

The audio ports are color-coded for easy identification:

  • Blue: Audio Input
  • Green: Audio Output / Front Speaker Output
  • Pink: Microphone Input

5. Setup and Installation

Before proceeding with installation, ensure you have read and understood the safety precautions. Always refer to the motherboard for pin 1 markings (often indicated by '1' or a white bold line).

5.1 CPU Installation

To properly install the CPU, align the golden triangle (Pin1 indicator) on the CPU with the corresponding mark on the LGA1151 socket.

CPU socket on motherboard
Figure 5.1: CPU socket area. Ensure correct alignment using the golden triangle indicator.

5.2 Memory Installation

  1. Pull the clips at both ends of the memory slot outwards.
  2. Align the memory module with the slot, matching the notch on the module with the key in the slot.
  3. Press down firmly on both ends of the memory module until the clips automatically spring up and lock it into place.

5.3 M.2 Interface Installation

  1. Locate the M.2 slot and remove the screw from the screw base.
  2. Insert your M.2 module into the M.2 interface at a 30-degree angle.
  3. Gently push the M.2 module down and secure it with the screw into the trailing edge notch.

5.4 Graphics Card Installation

  1. Open the clip at the end of the PCIe x16 slot.
  2. Align your graphics card with the slot and press it firmly into place until the clip automatically locks.
  3. Secure the graphics card to the chassis with screws.
  4. Connect any necessary PCIe power cables from your power supply to the graphics card.

5.5 Internal Connectors

Connect internal components such as front panel audio, USB headers, and SATA devices according to the following diagrams and pinouts:

5.5.1 Clear CMOS Jumper (CLR-CMOS)

To clear CMOS settings, locate the CLR-CMOS jumper. With the system powered off, move the jumper from pins 1-2 to 2-3 for a few seconds, then return it to 1-2.

5.5.2 Front Panel Connectors (F_PANEL1)

Connect your case's front panel cables (Power LED, HDD LED, Power Switch, Reset Switch) to the F_PANEL1 header. Refer to the motherboard diagram for exact pin locations.

Table 5.1: F_PANEL1 Pinout
Pin Description
1HDD LED+
2PWR LED+
3HDD LED-
4PWR LED-
5RESET_SW
6POWER_SW
7RESET_SW
8POWER_SW
9N.C
10N.C

5.5.3 Front Audio Output Ports

Connect your case's front audio panel to this header.

Table 5.2: Front Audio Pinout
Pin Description
1MIC+
2Ground
3Vbias
4AuD_Vcc(AVCC)
5L_R_Out
6R_Out_Back
7N.C
8Key
9L_Out
10L_Out_Back

5.5.4 USB Expansion Ports

Connect additional USB ports from your case to these headers.

Table 5.3: USB 2.0 Expansion Pinout
Pin Description
1VCC
2VCC
3D-
4D-
5D+
6D+
7GND
8GND
9KEY
10N.C

5.5.5 USB 3.0 Interface

Connect your case's front USB 3.0 ports to this header.

Table 5.4: USB 3.0 Expansion Pinout
Pin Description
1Power
2USB3_RX_DN
3USB3_RX_DP
4Ground
5USB3_TX_C_DN
6USB3_TX_C_DP
7Ground
8USB2.0-
9USB2.0+
10GND
11USB2.0+
12USB2.0-
13Ground
14USB3_TX_C_DP
15USB3_TX_C_DN
16Ground
17USB3_RX_DP
18USB3_RX_DN
19Power
20N.C

5.5.6 SATA Interfaces

Connect your SATA storage devices (HDDs, SSDs) to the 4 SATA 3.0 ports.

5.5.7 PCI-E Expansion Slots

The motherboard features one PCI-E x16 3.0 slot for graphics cards and one PCI-E x1 3.0 slot for other expansion cards.

6. Operating Your System

6.1 Driver Installation

After installing your operating system, you will need to install the necessary drivers for the motherboard's components to function correctly. The drivers are typically provided on a CD/DVD or can be downloaded from the manufacturer's website.

6.1.1 Driver Directory Overview

Table 6.1: Driver Directory
Driver Category Description Supported OS
B250-D4 Chipset DriverIntel Chipset Information InstallationWin7/Win10/Win11
B250-D4 Sound Card DriverRealtek Series Sound Card Driver InstallationWin7/Win10/Win11
B250-D4 LAN DriverRealtek Network Card Driver InstallationWin7/Win10/Win11

6.1.2 General Driver Installation Steps

  1. Run the driver installer (e.g., Setup.exe).
  2. Follow the on-screen prompts, clicking "Next" or "Yes" as appropriate.
  3. After installation, the system may prompt you to restart. Restart the computer to complete the installation.
  4. For external video cards, install drivers provided by the graphics card manufacturer.

6.1.3 Uninstalling Drivers

To uninstall a driver (e.g., Realtek High Definition Audio Driver):

  1. Navigate to "Settings" / "Control Panel" in Windows.
  2. Select "Add/Remove Programs" or "Programs and Features".
  3. Locate the driver in the list and click "Uninstall" or "Remove".

6.2 BIOS Settings

The BIOS (Basic Input/Output System) stores critical system information in the CMOS SRAM. This data is maintained by a battery when the system is off. To access the BIOS Setup Utility:

  1. Power on your computer.
  2. During the Power-On Self-Test (POST), repeatedly press the Delete or Del key.
  3. Alternatively, press F7 for a warm boot key.

The BIOS Setup Utility allows you to configure various system parameters. Menus with a triangle symbol indicate sub-menus.

6.2.1 Main Menu Functions

  • Main: System Overview, Date/Time settings, HDD specifications, Monitor type settings.
  • Advanced: Advanced Settings for BIOS special functions (e.g., virus alerts, boot disk priority).
  • Chipset: Advanced Chipset Settings.
  • Boot: Boot Settings.
  • Security: BIOS password settings.
  • Save & Exit: Options to save settings, load optimized defaults, load fail-safe defaults, discard changes, or exit without saving.

7. Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your motherboard.

  • Cleaning: Periodically clean dust from the motherboard and case using compressed air. Ensure the system is powered off and unplugged before cleaning.
  • BIOS Updates: Check the HUANANZHI website for the latest BIOS updates. Update BIOS only if necessary and follow the instructions carefully to avoid system instability.
  • Driver Updates: Keep your drivers updated to ensure compatibility and optimal performance with your operating system and hardware.
  • Physical Inspection: Occasionally inspect the motherboard for any signs of physical damage, loose connections, or bulging capacitors.

8. Troubleshooting

If you encounter issues with your motherboard, consider the following troubleshooting steps:

  • No Power/No POST:
    • Check all power connections (24-pin ATX, 8-pin CPU, PCIe power for GPU).
    • Ensure CPU, RAM, and GPU are correctly seated.
    • Try booting with minimal components (CPU, one RAM stick, GPU if no integrated graphics).
    • Clear CMOS settings (refer to Section 5.5.1).
  • No Display:
    • Verify monitor connection and input source.
    • If using a dedicated graphics card, ensure it's properly installed and powered.
    • Test with integrated graphics (if available) by removing the dedicated GPU.
  • Driver Issues:
    • Ensure correct drivers are installed for your operating system.
    • Check Device Manager for any devices with exclamation marks.
    • Try reinstalling the problematic driver.
  • Component Incompatibility:
    • The motherboard may have compatibility issues with certain brands or versions of CPUs, RAM, or M.2 SSDs.
    • It is recommended to confirm compatibility with customer service before purchasing components.
  • System Instability/Crashes:
    • Check CPU and GPU temperatures.
    • Ensure RAM is stable (run memory diagnostic tools).
    • Verify power supply is adequate for all components.

9. Specifications

Table 9.1: HUANANZHI B250 D4 Motherboard Specifications
Feature Specification
ModelHUANANZHI B250-D4 motherboard
CPU SocketIntel LGA 1151 (Supports 6th/7th/8th/9th Gen Core i7/i5/i3, Pentium, Celeron)
ChipsetIntel B250
Memory Sockets2 x DDR4 DIMM
Memory StandardDual Channel DDR4 2666/2400/2133MHz, up to 32GB (Non-ECC)
Storage Interface4 x SATA3.0 interfaces
Expansion Slots1 x PCI Express 3.0 x16, 1 x PCI Express 3.0 x1, 1 x M.2 NVME PCIe 3.0X4 (key M) 2242/2260/2280, 1 x M.2 WIFI NGFF
Rear I/O Ports1 x PS/2, 4 x USB 2.0, 2 x USB 3.0, 1 x RJ45, 1 x VGA, 1 x HDMI, 1 x DP, 3 x 3.5mm Audio Jacks
Onboard Connectors & Header24-pin Main Power Connector, CPU Fan Connector(s), 1 x 9pin USB2.0 pin, 1 x 19pin USB3.0 pin, 1 x Front Audio Output pin
Onboard SoundcardALC662 5.1-channel
Onboard NICGigabit NICs (Realtek 1000Mbps)
Power Interface24-pin + 8-pin
Fan Interface2
PCB Layers4 layers
Power Supply Phase5 phase
Form FactorM-ATX (215*168MM)

10. Warranty and Support

HUANANZHI is committed to providing high-quality products and support.

  • Quality Assurance: Our engineers conduct full-load operation tests on each motherboard to ensure the best quality before shipment.
  • Technical Support: For any installation or technical assistance, please contact HUANANZHI official customer service via E-mail: business@huananzhi.com.
  • User Manual: This user manual is provided to assist you with installation and operation. Please retain it for future reference.
  • Warranty Card: A warranty card is included in your package. Please refer to it for specific warranty terms and conditions.
Engineers testing motherboards
Figure 10.1: HUANANZHI engineers conducting quality control tests.
HUANANZHI brand introduction and certifications
Figure 10.2: HUANANZHI brand introduction, certifications, and warranty information.

For a more detailed user manual, you may refer to the official PDF document: HUANANZHI B250 D4 User Manual (PDF).

11. User Tips

  • Component Compatibility: Always verify the compatibility of your CPU, RAM, and M.2 SSD with the motherboard before purchase to avoid potential issues.
  • Battery Removal: Note that the CMOS battery may be removed from the motherboard before shipping due to shipping regulations. You will need to install one upon receipt.
  • Static Electricity: Before handling any components, always ground yourself to prevent electrostatic discharge, which can damage sensitive electronics.
  • Firm Connections: Double-check all power cables, data cables, and component seating (CPU, RAM, GPU) to ensure they are firmly connected before powering on the system.

12. Product Overview Video

Watch this video for a visual overview of the HUANANZHI B250 D4 Motherboard and its features.

Video 12.1: HUANANZHI B250 D4 Motherboard Product Overview.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.