ASCELINA PL230 PL049

Contents

ASCELINA Motion Sensor LED Ceiling Light User Manual

Model: PL230 PL049

Thank you for choosing the ASCELINA Motion Sensor LED Ceiling Light. This manual provides essential information for the safe and efficient use of your new lighting product. Please read it thoroughly before installation and operation.

1. Product Overview

The ASCELINA Motion Sensor LED Ceiling Light is a versatile and energy-efficient lighting solution designed for various indoor and semi-outdoor applications. Featuring a 4000mAh rechargeable battery, motion detection, adjustable color temperature, and dimmable brightness, it offers convenience and customizable illumination.

ASCELINA Motion Sensor LED Ceiling Light with remote and USB charging cables, showing different color temperatures.
ASCELINA Motion Sensor LED Ceiling Light, remote control, and USB charging cables.

Key Features:

  • Motion Sensor: 120° detection angle, up to 16ft (5 meters) range, auto-on when motion is detected, auto-off after 20 seconds.
  • Rechargeable Battery: Built-in 4000mAh battery for cordless operation.
  • Adjustable Color Temperature: Three settings (3000K Warm White, 4500K Neutral White, 6500K Cool White).
  • Dimmable Brightness: Adjustable from 5% to 100%.
  • Timing Function: Optional 30-minute or 60-minute timer.
  • Remote Control: For convenient adjustment of settings.
  • Dual Installation Options: Adhesive or drilling for flexible mounting.
  • Versatile Application: Ideal for entryways, stairs, corridors, garages, closets, balconies, under cabinets, pantries, and more.

2. Installation Instructions

Before beginning installation, ensure all components are present and the power supply is disconnected if wiring directly. This light offers two primary installation methods: adhesive and drilling.

Components Included:

  • LED Ceiling Light Unit
  • Remote Control
  • USB Charging Cable
  • Mounting Hardware (screws, rubber plugs, adhesive strips)

Installation Steps:

Installation diagram showing adhesive and drilling options.
Two installation options: Adhesive and Drilling.
  1. Confirm Position: Determine the desired location for the light and mark the spots where holes need to be drilled (for drilling installation) or where the adhesive plate will be attached.
  2. Drilling Installation (if applicable):
    • Drill holes in the marked area.
    • After drilling, insert the rubber plugs into the holes. Tap gently with a hammer if necessary to ensure they are flush.
    • Use a screwdriver to fix the pendant (mounting bracket) onto the wall using the provided screws.
  3. Adhesive Installation (if applicable):
    • Ensure the mounting surface is clean, dry, and smooth.
    • Peel off the protective backing from the adhesive strips on the mounting plate.
    • Firmly press the mounting plate onto the desired surface for at least 30 seconds.
  4. Wiring (if applicable, for direct power connection):
    • IMPORTANT: Cut off the main power supply before connecting any wires.
    • Connect the live wire, ground wire, and neutral wire to the corresponding terminals on the light's connector. Ensure connections are secure.
  5. Attach the Light: Align the light unit with the installed mounting bracket (or adhesive plate) and secure it. For drilling installation, tighten the screws to firmly fix the lamp.

The light is designed for self-contained, surface-mounted installation.

3. Operating Instructions

3.1 Charging the Battery

The light features a 4000mAh rechargeable battery. Use the provided USB charging cable to charge the device. Connect the USB-A end to a power adapter (not included) and the USB-C end to the charging port on the light. The indicator light will show charging status.

3.2 Motion Sensor Operation

The integrated motion sensor detects movement within a 120° angle and up to 16 feet (approximately 5 meters). In motion sensor mode, the light will automatically turn on when movement is detected and turn off after 20 seconds of no activity.

Diagram illustrating 120 degree motion detection angle and 16ft range.
Motion sensor detection angle and range.

The light also supports a Day/Night mode, allowing it to operate only in low-light conditions when motion is detected, conserving battery life during the day.

3.3 Remote Control Functions

Use the remote control to access various settings:

  • ON/OFF: Turn the light on or off.
  • Color Temperature Adjustment: Switch between 3000K (Warm White), 4500K (Neutral White), and 6500K (Cool White).
  • Brightness Adjustment: Dim or brighten the light from 5% to 100%.
  • Timing Function: Set the light to turn off automatically after 30 or 60 minutes.
  • Motion Sensor Mode: Activate or deactivate the motion sensor.
Image demonstrating 3 color temperatures and brightness adjustment from 5% to 100%.
Adjustable color temperature and brightness settings.
Image showing the timing function (30/60 min) with a person sleeping.
Timing function for automatic shut-off.

4. Maintenance

  • Cleaning: To clean the light, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
  • Battery Care: For optimal battery life, avoid fully discharging the battery frequently. Recharge the light when the brightness noticeably decreases.
  • Storage: If storing the light for an extended period, ensure it is fully charged and store it in a cool, dry place. Recharge every 3-6 months to maintain battery health.

5. Troubleshooting

Problem Possible Cause Solution
Light does not turn on.
  • Battery is depleted.
  • Motion sensor is not triggered or in Day mode.
  • Remote control battery is dead.
  • Wiring issue (if directly connected).
  • Charge the light using the USB cable.
  • Ensure motion sensor mode is active and it's dark enough (if Day/Night mode is on). Check for obstructions.
  • Replace remote control battery.
  • Check wiring connections and ensure power is supplied.
Motion sensor not working correctly.
  • Sensor is obstructed.
  • Light is in continuous ON mode.
  • Ambient light is too bright (if in Day/Night mode).
  • Motion is outside detection range/angle.
  • Clear any obstructions from the sensor.
  • Switch to motion sensor mode using the remote.
  • Test in a darker environment or adjust sensor sensitivity if available.
  • Ensure motion occurs within 16ft and 120° angle.
Remote control is unresponsive.
  • Remote battery is low or dead.
  • Obstruction between remote and light.
  • Remote is too far from the light.
  • Replace the remote control battery.
  • Ensure a clear line of sight to the light.
  • Move closer to the light.

6. Specifications

Feature Specification
Brand NameASCELINA
Model NumberPL230 PL049
Item TypeCeiling Lights
Installation MethodSelf-contained, Surface Mounted
Body MaterialABS
MaterialPVC
ColorWHITE
Voltage12 V (DC)
Power SourceDC
Bulbs IncludedYes
DimmableYes (5%-100%)
Luminous Flux<60 Lumens
Number of Light Sources1
Lighting Area1-3 square meters
FinishPolishing
TechnicsPlain Dyed
Smart DeviceNo
Switch TypeNone (Motion Sensor/Remote Controlled)
Application AreasKitchen, Dining Room, Bedroom, Foyer, Study, Bathroom, Exhibition Hall, Corridor, Balcony, Garage, Closet, Under Cabinet, Pantry, Bedside Nook
CertificationCE, FCC
OriginMainland China
Battery Capacity4000mAh Rechargeable
Color Temperatures3000K, 4500K, 6500K
Motion Sensor Angle120°
Motion Sensor RangeUp to 16ft (approx. 5 meters)
Auto-Off Delay20 seconds (after no motion)
Timing Functions30 min, 60 min
Package Length27 cm
Package Width26 cm
Package Height4 cm
Package Weight0.911 kg

7. User Tips

  • Optimal Motion Detection: For best performance, ensure the motion sensor is not obstructed by furniture, curtains, or other objects.
  • Continuous Lighting: If you need continuous light, use the remote control to switch the light out of motion sensor mode.
  • Initial Charge: Fully charge the light before its first use to ensure maximum battery life and performance.
  • Remote Range: Keep the remote control within a reasonable distance and clear line of sight to the light for reliable operation.
  • Placement for Coverage: Consider the 120° detection angle and 16ft range when choosing an installation spot to ensure adequate coverage for your desired area.

8. Warranty and Support

For detailed warranty information and customer support, please refer to the official product documentation or contact ASCELINA customer service.

A comprehensive user manual in PDF format is available for download: Download User Manual (PDF)

If you encounter any issues not covered in this manual, please reach out to the seller or manufacturer for assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.