VEKOOTO VB8

Contents

VEKOOTO Bicycle Rear View Camera System

Model: VB8

1. Introduction

Thank you for purchasing the VEKOOTO Bicycle Rear View Camera System. This system is designed to enhance your cycling safety by providing a clear, real-time view of what's behind you. Please read this manual carefully before installation and use to ensure optimal performance and longevity of your device.

VEKOOTO Bicycle Rear View Camera System with 5-inch HD monitor and camera

Figure 1: VEKOOTO Bicycle Rear View Camera System

2. Package Contents

Before proceeding with installation, please verify that all items listed below are present in your package:

  • 1 x 5-inch HD Monitor
  • 1 x Rear View Camera
  • 1 x Monitor Bracket
  • 1 x Camera Bracket
  • 1 x Micro USB Charging Cable
  • 1 x Hook & Loop Tape
  • 1 x Gasket
  • 1 x Screw
  • 1 x User Manual
Diagram of package contents including monitor, camera, brackets, and cables

Figure 2: Package Contents Diagram

Video 1: Unboxing and overview of the VEKOOTO Bicycle Rear View Camera System.

3. Setup

3.1 Charging the Monitor

  1. Connect the Micro USB charging cable to the monitor's charging port.
  2. Connect the other end of the USB cable to a standard USB power adapter (not included) or a computer USB port.
  3. The monitor's battery indicator will show charging status. Ensure the monitor is fully charged before first use for optimal battery life.

3.2 Mounting the Monitor

  1. Attach the monitor bracket to your bicycle handlebar. The bracket is adjustable and supports pipe diameters between 20mm and 40mm.
  2. Securely fasten the monitor to the bracket, ensuring it is positioned for easy viewing without obstructing your riding.

3.3 Mounting the Camera

  1. Attach the camera bracket to a suitable location on the rear of your bicycle, such as the seat post or rear rack.
  2. Securely attach the camera to the bracket. The camera bracket allows for 720° rotation, enabling you to adjust the viewing angle for the best rear perspective.

3.4 Connecting the System

  1. Connect the cable from the rear view camera to the designated camera input port on the monitor.
  2. Ensure all connections are secure.
Diagram showing adjustable monitor bracket and 720 degree camera rotation

Figure 3: Adjustable Monitor and Camera Brackets

4. Operating Instructions

4.1 Powering On/Off

  • To power on the monitor, press and hold the power button (usually labeled 'P' or indicated by a power symbol) until the screen illuminates.
  • To power off, press and hold the power button again until the screen turns off.

4.2 Real-Time Monitoring

  • Once powered on, the monitor will display a live feed from the rear camera.
  • The 5-inch HD display provides a clear 1080P image with a 110° wide viewing angle, reducing blind spots.
Image illustrating 1080P HD image quality and 110 degree wide view angle

Figure 4: High-Definition Display and Wide View Angle

4.3 Night Vision

  • The camera is equipped with color night vision capabilities, providing clear and vivid images even in low-light conditions or at night.
Close-up of the camera lens highlighting color night vision

Figure 5: Color Night Vision Feature

4.4 Battery Status

  • The monitor features a built-in 5000mAh battery, providing approximately 6 hours of continuous working time.
  • A battery indicator on the screen will show the current charge level.
Monitor displaying a 5000mAh battery charge indicator

Figure 6: Battery Level Display

4.5 Monitor Buttons

The monitor features several buttons (P, OK, +, M, -). The 'P' button typically controls power on/off. Other buttons are generally used for navigating menus and adjusting settings such as brightness, contrast, or display modes. Specific functions for each button may vary; refer to on-screen prompts if available.

5. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the monitor screen and camera lens. Do not use abrasive cleaners or solvents.
  • Water Resistance: The camera has an IP68 waterproof rating, making it resistant to dust and water immersion. However, avoid prolonged submersion or high-pressure water jets. The monitor is not rated for water resistance; protect it from heavy rain.
  • Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in use for extended periods. Store in a cool, dry place.
  • Storage: When not in use for a long time, store the system in a dry, temperate environment, away from direct sunlight and extreme temperatures.

6. Troubleshooting

  • No Image on Screen:
    • Ensure the monitor is powered on and fully charged.
    • Check that the camera cable is securely connected to the monitor.
    • Verify the camera is powered on (if applicable, though it's typically powered by the monitor).
  • Poor Image Quality:
    • Clean the camera lens and monitor screen with a soft cloth.
    • Ensure there are no obstructions in front of the camera.
    • Check for strong light sources directly entering the camera lens, which can cause glare.
  • Monitor Not Charging:
    • Ensure the USB cable is properly connected to both the monitor and the power source.
    • Try using a different USB cable or power adapter.
    • Verify the power source is functional.
  • Buttons Not Responding:
    • Try restarting the monitor by powering it off and then on again.
    • If the issue persists, ensure the device is fully charged.

7. Specifications

FeatureSpecification
ModelVB8
Screen Size5-inch AHD 1080P
Aspect Ratio16:9
ResolutionIPS800(H)*480(V)
Input Voltage5V
Brightness1000cd/m2
Battery Capacity5000mAh
Camera Solution1/2.9" 2053
Image FormatAHD
Effective Pixel1920H x 1080V
Camera Angle110°
Waterproof Grade (Camera)IP68
Main MaterialPlastic
Handlebar Compatibility20mm ~ 40mm diameter

8. User Tips

  • The wide and bright screen provides excellent visibility, significantly enhancing your security while cycling.
  • Benefit from good visibility even at night, with minimal glare, ensuring clear rear views in various lighting conditions.
  • The built-in rechargeable battery offers convenience, eliminating the need for external power connections during your rides.
  • The system is designed for easy mounting and installation, making it quick to set up on most bicycle types.
Grid of images showing various bicycle types compatible with the system

Figure 7: Compatibility with Various Bicycle Types

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your original retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.