1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your YRHAND D01 TUYA WiFi Smart Door Lock. Please read it carefully before use to ensure proper functionality and safety.
Important Notes:
- Please carry the mechanical key with you or store it in an outdoor safe place for any emergency use.
- Do not install this lock in a fire exit door.
2. Product Features
The YRHAND D01 Smart Door Lock offers advanced security and convenience with multiple unlocking methods and smart features.
Video: Demonstrates various unlocking methods including app, fingerprint, code, card, and key.

Image: Overview of the YRHAND D01 Smart Door Lock highlighting Tuya WiFi, IP66 Waterproof, and Dustproof features.
Key Highlights:
- Ultra-Narrow Design: 34mm panel suitable for most framed doors, wooden doors, metal doors, and sliding doors.
- Multiple Unlocking Methods: Fingerprint, APP (Tuya), Password, RFID Card, and Mechanical Keys.
- IP66 Waterproof & Dustproof: Durable paint technology surface, anti-smudging, and multi-layer waterproof protection for various weather conditions.
- Semiconductor Fingerprint Sensor: Accurate and fast recognition (0.5s) with a high success rate (≥99%). Stores up to 100 fingerprints.
- APP Remote Control: Unlock remotely, receive alert prompts, view unlock records, manage temporary passwords, and user access via the Tuya Smart app.
- Smart Automation: Auto-lock by lifting the handle, and a 'Normally Open' mode for temporary unrestricted access.
- Advanced Security Alerts: Anti-pry alarm, malicious password attempt lockout, and low-battery alerts.
- Convenient Power Options: Powered by 4 AA alkaline batteries (approx. 10 months battery life). Features a hidden keyhole and USB port for emergency power.

Image: Visual representation of the lock's key features and unlocking methods.

Image: Illustrates the ultra-narrow 34mm panel design and its suitability for various door types.

Image: Diagram detailing the APP remote control functions.

Image: Close-up of the semiconductor fingerprint sensor and its performance metrics.
3. Setup and Installation
3.1 Before Installation
- Professional installation is recommended.
- To avoid any circuit function fault, do not crumple the cable.
- Keep the door open until finishing the installation and lock function test.
- After installation, check if fingerprint, card, password, and inside knob unlock functions work well. (Under initial status, any fingerprint, IC card, or 4-digit password can unlock).
- If any function doesn't work, check cable connections and operation steps, then reinstall if necessary.
3.2 Measuring Your Door
Before installation, accurately measure your door's thickness and the dimensions of the guide sheet to ensure compatibility with the lock mortise.

Image: Guide on how to measure door and lock dimensions.
3.3 Installation Diagram and Steps
Refer to the diagrams for component identification and assembly.

Image: Product parameters and component overview.

Image: Diagram for selecting the correct mortise, specifically 3585-22x270 (with double hook).

Image: Illustrates the narrow frame design and its application.
Installation Diagram Components:
- Back panel knob
- Mortise fasten screws
- Mortise components
- Connecting screw
- Panel fasten screw
- Cylinder panel
- Cylinder
- Front panel
Installation Steps:
- Open the front panel and insert the lock cylinder (refer to diagram 7,8).
- Use the studs to connect the front panel and cylinder panel, then tighten the screws to fix (refer to diagram 4,5,6).
- Fix the rim mortise on the door, then cover it with the back panel and fix it (refer to diagram 1,2,3).
3.4 Buckle Installation

Image: Diagram for buckle installation.
Buckle Components:
- Buckle fastening screws
- Door frame
- Buckle connecting screws
- Buckle plate fixing screw
- Buckle
- Buckle plate
Buckle Installation Steps:
- Use the screws to fix the buckle plate on the door.
- Use screws to fix the buckle.
- After installation, test the knob of the rim lock to ensure the deadbolt fits the buckle slot well. If unlocking is not smooth, adjust the buckle position.
3.5 APP Setting (Tuya Wi-Fi APP, supports 2.4GHz only)
- Add administrator (skip if already done).
- Search for "Tuya Smart" in your app store and download it.
- Register by mobile phone number and log in.
- In the Tuya APP, find "security and sensor" and press "door lock (Wi-Fi)". Follow instructions to add the lock.
Net Connecting:
- Enter Wi-Fi setting menu.
- Press "*#" to verify administrator information.
- Press 1 to enter administrator setting menu.
- Press 3 to finish the Wi-Fi setting.
Connection Methods:
The lock voice will report: press 1 for hotspot connection (screen indicator light flashes slowly); press 2 for intelligent connection (screen indicator light flashes rapidly). Intelligent connection is recommended.
Hotspot Connection Operation:
- Enter Wi-Fi connection menu, then press 1 to choose hotspot connection.
- Choose the Wi-Fi hotspot to connect to, then input the correct password.
- Press "Next". The lock will inform you "successful" or "failed". If failed, try again.
Intelligent Connection Operation:
- Enter Wi-Fi connection menu, then press 2 to choose intelligent connection.
- Choose the Wi-Fi to connect to, then input the correct password.
- Press "Next". The lock will inform you "successful" or "failed". If failed, try again.
After successful adding, the keypad screen number 1234 will flash successively with voice "successful". If time out, voice will report "fail".
4. Operating Instructions
4.1 Keypad Function Description
- Administrator Information: Refers to registered fingerprint, password, or IC card administrators.
- Unlock Information: Refers to registered fingerprint, password, or IC card information (including administrators and users).
- "*" Key: Delete / Back key. Enter "*" to delete the input password. Three consecutive "*" operations will clear all input information.
- "#" Key: Operation confirm key / Menu function key.
4.2 Factory Initial Status
- Factory initial password is 123456#. All fingerprints, IC cards, or 4-digit passwords can unlock under this status.
- After administrator registration, unregistered fingerprints, IC cards, or passwords will no longer unlock the door.
4.3 Lock Function Management Menu
To access the management menu, press "*#". The lock will prompt you to input administrator info (default: 123456#).
After successful operation, the menu options are:
- Press 1 for Administrator Setting
- Press 2 for User Setting
- Press 3 for System Setting
- Press 4 for Restoration Setting (Factory Reset)
4.4 Administrator Setting
4.4.1 Add Administrator Information:
- Enter lock function management by pressing "*#", then press 1.
- Voice prompt: "press 1 for administrator setting, press 2 for user setting." Press 1.
- Press 1 to add administrator. Input 4 times fingerprint or twice password of 8 digits (e.g., 6666#) to register. Card requires one recognition.
- Continue to add another administrator or press "*" for the previous menu or to exit.
4.4.2 Delete Administrator Information:
- Enter lock function management by pressing "*#", then press 1.
- Voice prompt: "press 1 for administrator setting, press 2 for user setting." Press 2.
- Voice prompt: "input the number and confirm by # key (e.g., 001)".
- Continue to delete other administrators or press "*" for the previous menu or to exit.
4.5 User Setting
4.5.1 Add User Information:
- Enter lock function management by pressing "*#", then press 2.
- Voice prompt: "press 1 for administrator setting, press 2 for user setting." Press 1.
- Voice report "input unlock information". Input 4 times fingerprint or twice password of 8 digits (e.g., 6666#) to register. After successful registration, you can continue to add another.
- Continue to add user or press "*" back to the previous menu or exit the menu.
4.5.2 Delete User Information:
- Enter lock function management by pressing "*#", then press 2.
- Voice prompt: "press 1 to add user, press 2 to delete user." Press 2.
- Voice prompt: "press 1 to delete number (e.g., input 010# will delete user 010); press 2 to delete all."
- Continue to delete other users or press "*" back to the previous menu or exit the menu.
4.6 System Setting
4.6.1 Voice Setting:
- Enter lock function management by pressing "*#", then press 3.
- Voice prompt: "press 1 for voice setting, press 2 for unlock mode; press 3 for language setting; press 4 for time setting." Press 1.
- Voice prompt: "press 1 to turn on voice; press 2 to turn off voice." Select your option.
- Press "*" back to the previous menu or exit the menu.
4.6.2 Unlock Mode Setting:
- Enter lock function management by pressing "*#", then press 3.
- Voice prompt: "press 1 for voice setting, press 2 for unlock mode; press 3 for language setting; press 4 for time setting." Press 2.
- Voice prompt: "press 1 for single unlock, press 2 for combination unlock." Select your option.
- Press "*" back to the previous menu or exit the menu.
4.6.3 Language Setting:
- Enter lock function management by pressing "*#", then press 3.
- Voice prompt: "press 1 for voice setting, press 2 for unlock mode; press 3 for language setting; press 4 for time setting." Press 3.
- Voice prompt: "press 1 for Chinese; press 2 for English." Select your option.
- Press "*" back to the previous menu or exit the menu.
4.6.4 Time Setting:
- Enter lock function management by pressing "*#", then press 3.
- Voice prompt: "press 1 for voice setting, press 2 for unlock mode; press 3 for language setting; press 4 for time setting." Press 4.
- The lock will report the current date and time. Modify it in "YYMMDDHHMMSS" format (Y-year, M-month, D-date, H-hour, M-minute, S-second).
4.7 Remote Control
- Add administrator (skip if already done).
- Enter Wi-Fi setting menu.
- Press "*#" to verify administrator information.
- Press 2 to enter user setting menu.
- Press 1, then press any key on the remote control when you hear the voice instruction.
5. Maintenance
5.1 Battery Replacement
The lock is powered by 4 AA alkaline batteries. When the voltage is lower than 4.8V ± 0.2V, the lock will give a warning alarm during each unlock operation. Please replace the batteries as soon as possible.

Image: Battery compartment and emergency power options.
6. Troubleshooting
6.1 Common Issues and Solutions
- Keypad Locked: 5 consecutive wrong password inputs will lock the keypad for 30 seconds. During this time, the lock will not respond to any operation. Wait for 30 seconds before trying again.
- Unregistered Access Fails: After administrator registration, any unregistered fingerprint, IC card, or password will fail to unlock. Ensure all users are properly registered.
- APP Connection Failed: If the APP reports "failed" during Wi-Fi connection, double-check your Wi-Fi password and ensure your network is 2.4GHz. Try the connection process again.
- Lock Not Responding: Check battery level. If low, replace batteries. Ensure cables are properly connected if recently installed or reinstalled.
6.2 Reset to Factory Status
To reset the lock to factory settings:
- Press "*#" to enter lock function management, then press 4 for restoration setting.
- Input administrator information ending with "#" key.
- Initialization will be successful.
Alternatively, press the "SET" button on the back panel for 6 seconds. The screen number 654321 will automatically flash successively. The initial password will be 123456.
6.3 Language Switch
Under factory initial status, you can switch the language between Chinese and English by inputting 333666999#.
7. User Tips
- The lock is reported to offer great value for money.
- It has been successfully installed and works perfectly on sliding aluminum doors.
- The installation process is generally considered easy.
- This lock supports a multi-point lock system, provided the dimensions match.
8. Specifications
8.1 General Product Properties
- Material: Zinc Alloy
- Power Supply: DRY BATTERY (4 AA Alkaline batteries)
- Protection Level: IP66
- Suitable for Mortise: Other
- Suitable Door Type: Steel Door, Wooden Door, Brass Door, Stainless Steel Door, Other
- Special Features: Built-in Gateway
- Finish Type: Other
- Doorknob Function: Biometric, Key & Keypad
- Connectivity: WiFi
- Ways To Unlock: App, Mechanical Keys, WiFi, Password, FINGERPRINT
- Handle Direction: Direction Reversible
- Certification: CE, FCC
- Smart home platform: Tuya
8.2 Technical Parameters
| Item | Parameter | Remark |
|---|---|---|
| Quiescent current | ≤50uA | |
| Dynamic current | ≤180mA | |
| Administrator capacity | 9 | |
| Fingerprint capacity | 100 | |
| FP+PWD+ card capacity | 300 | |
| Fingerprint scanner | Semi-conductor | |
| Fingerprint recognition | ≤1s | |
| FP recognition angle | 360 degree | |
| False rejection rate | ≤0.1% | |
| False recognition rate | ≤0.0001% | |
| Acting time | ≤0.5s | |
| Power | DC 6V | |
| Emergency power | DC 5V | |
| Working temperature | -25°C ~ 60°C | |
| Working relative humidity | 20% ~ 90%RH | |
| Human voice | YES | |
| Keypad | 12 digits touching keypad | |
| Password length | 4-8 digits | |
| Virtual password | 32 digits | |
| Low power warning | 4.8±0.2V | |
| Unlock time | ≤1s |
9. Warranty and Support
9.1 Warranty Policy
The product comes with a 24-month manufacturer's limited warranty for defective items. This warranty does not cover items damaged due to misuse or improper installation.
9.2 Customer Support
For any issues, questions, or to report a defective item, please contact customer service. Provide your order number and a clear description of the defect. Do not attempt to return items without prior authorization.