Bonacell Wireless Game Controller User Manual

Introduction

Thank you for purchasing the Bonacell Wireless Game Controller. This controller is designed to provide an immersive gaming experience across multiple platforms. Please read this manual carefully before use to ensure proper operation and to take full advantage of its features.

Key Features:

• 6-Axis Gyroscope: For precise motion control.
• Dual Vibration: Provides excellent vibration feedback for enhanced game immersion.
• TURBO Keys: Supports 3 adjustable levels (5, 12, 20 shots/s) for rapid firing.
• Programmable Function: PL/PR keys can be set to 1-16 combined function keys. Up to 17 buttons can be programmed.
• 3.5mm Headphone Jack: Plug in any compatible headset.
• Adjustable Volume: Integrated volume control slider.
• Anti-slip Ergonomic Design: Comfortable grip for extended gaming sessions.
• Precision Triggers: Hall Effect Linear Triggers with vibration function for immersive racing games.
• Refined Analog Sticks: No dead zone and drift.
• Upgraded Buttons: Pressure real-time touch, quick response, zero lag.
• Built-in 650mAh Rechargeable Battery: Offers approximately 11 hours of playing time with a 2-hour charging time.
• Wireless Connectivity: 2.4G wireless connection with a USB dongle.
• Wide Compatibility: Compatible with Xbox One, Xbox Series X/S, PC (Windows 10 and above), and Steam.

Figure 1: Gamepad compatibility across various platforms.

Package Contents

The package includes the following items:

• Wireless Gamepad ×1
• USB Dongle Receiver ×1
• Type-C Cable ×1
• User Manual ×1
• Warranty Card ×1

Figure 2: Contents of the Bonacell Wireless Game Controller package.

Controller Layout

Familiarize yourself with the buttons and ports on your controller:

Figure 3: Front and back view of the controller with labeled components.

• Front: Left Stick, TURBO Button, Cross Key (D-Pad), Home Button, View Button, Menu Button, X/Y/A/B Buttons, Right Stick, Mute Switch, Headphone Jack.
• Top/Back: LB (Left Bumper), RB (Right Bumper), LT (Left Trigger), RT (Right Trigger), USB-C Charging Port, PR (Programmable Right) Button, SET Button, PL (Programmable Left) Button.

Setup Instructions

1. Xbox Consoles Connection (Xbox One/Series X/S)

1. Turn on your Xbox Console. The Xbox console indicator light will start to flash.
2. Insert the USB Dongle receiver into an available USB port on your Xbox. The dongle indicator light will start to flash slowly.
3. Press and hold the controller's HOME button for 1 second. The HOME indicator light on the controller will begin to flash.
4. Once successfully paired, both the controller's HOME button and the dongle's indicator light will remain steadily on, indicating a successful connection.

Figure 4: Visual guide for connecting the controller to an Xbox console.

2. PC Wireless Connection (Windows 10 and above)

1. Insert the USB Dongle receiver into an available USB port on your PC. The receiver's indicator light will begin to flash slowly.
2. Press and hold the controller's HOME button for 1 second. The controller's HOME button will change from a slow flash to a fast flashing state.
3. Once successfully paired, both the controller's HOME button and the receiver's indicator light will remain steadily on, indicating a successful connection.

Note: For PC systems below Windows 10, the receiver may not automatically update the driver. Ensure your Windows 10 system is up-to-date for optimal performance.

Figure 5: Visual guide for connecting the controller wirelessly to a PC.

Operating Instructions

1. One-Click Reconnection

After the initial pairing between the receiver and the controller, the system will automatically enter reconnection mode when the connection is re-established.

2. Powering Off / Dormant Mode

• To turn off the controller directly, long press the HOME button for 5 seconds. The receiver's LED will flash slowly, indicating it has entered back-connected pairing mode.
• If the controller is in reconnection state and fails to connect after 60 seconds, it will automatically shut down.
• If the controller is in code state and fails to code after 60 seconds, it will automatically shut down.
• If the controller is connected to a device and there is no key operation within 5 minutes, it will automatically shut down.
• To shut down the controller after unplugging the receiver, simply turn off the controller.

3. TURBO Function

The TURBO function is supported in any connection method and mode for buttons A, B, X, Y, LB, RB, LT, RT, L3, and R3.

1. Hold down the TURBO key.
2. Press the button you wish to assign the TURBO function to.
3. To cancel the TURBO function for a button, press the TURBO key and the assigned button again simultaneously.

Figure 6: Activating and adjusting the Turbo function.

4. MACRO Programming Function

The macro programming allows you to record a sequence of up to 16 key values.

1. Press and hold the SET key for 3 seconds. The HOME indicator light will flash slowly, and the motor will vibrate.
2. Press any function key (A, B, X, Y, LB, RB, LT, RT, L3, R3, Left/Right stick, Cross key) to record its press and release times.
3. After recording, press either the PL or PR key. The motor will vibrate, and the HOME indicator will remain steadily on, confirming successful button programming.

Figure 7: Macro programming setup.

To cancel macro settings: Press either PL or PR. The HOME indicator will remain steadily on, the macro setting will be canceled, and the motor will vibrate.

5. Mute Indication

To mute, press the Volume Down (Vol-) and Volume Up (Vol+) buttons simultaneously. A red LED light will indicate that mute is active.

Figure 8: Volume control and mute switch.

6. 3D Joystick Calibration

After turning on the controller, the 3D joysticks will automatically calibrate. Do not touch the 3D joysticks during the booting process to ensure accurate calibration.

7. Charging

When the controller is off and connected to the adapter, the LED light will flash slowly. Once fully charged, the LED will turn off. If the controller is on and connected, the LED lights will remain on. When connected to the adapter, the LED will flash slowly, and once fully charged, the LED will remain on.

8. Low Battery Alarm

When the battery voltage drops below 3.5V, the corresponding channel light will flash slowly, indicating that the battery is low and requires charging. The controller will automatically shut down at 3.3V to prevent damage.

Troubleshooting

1. Unauthorized Troubleshooting

If you encounter connection issues or unauthorized errors:

1. Ensure the USB receiver is plugged into the Xbox and connected to the controller. The controller's HOME light should be steadily on.
2. Press and hold LT + X + A simultaneously for 3 seconds. The controller will disconnect from the receiver and automatically enter reconnect mode. The controller's HOME light will remain on after successful reconnection.
3. If Step 2 does not resolve the unauthorized error, press and hold LT + Y + B simultaneously for 3 seconds. The controller will disconnect from the receiver and automatically enter reconnect mode. The controller's HOME light will remain on after successful reconnection.

Figure 9: Button combinations for unauthorized troubleshooting.

2. Reset Function

If the controller exhibits abnormal behavior, you can use the reset key located behind the controller to perform a reset.

Specifications

Reference Electrical Parameters (Xbox One Dongle Receiver)

Figure 10: Feature comparison of the Bonacell controller.

Maintenance

To ensure the longevity and optimal performance of your controller, follow these maintenance guidelines:

• Keep the controller clean by wiping it with a dry, soft cloth. Avoid using harsh chemicals or abrasive materials.
• Store the controller in a dry place, away from extreme temperatures and direct sunlight.
• Avoid dropping the controller or subjecting it to strong impacts.
• Do not attempt to disassemble or repair the controller yourself, as this may void the warranty.
• Charge the controller regularly, even if not in frequent use, to maintain battery health.

User Tips

• Easy Installation: Users have reported that the controller is easy to install with no issues, making setup quick and hassle-free.
• Optimal Performance: For the best experience, ensure your PC's operating system is Windows 10 or above, as older systems may not automatically update necessary drivers for the wireless receiver.

Warranty & Support

Your product comes with a Warranty Card included in the package. Please refer to the card for detailed warranty terms and conditions.

For technical support or warranty services, please scan the QR code provided on the first page of your physical user manual or contact the merchant directly. If you encounter any incompatibility issues when connecting to Xbox, please contact the merchant for an upgrade package.

Frequently Asked Questions (FAQ)

For any questions not covered in this manual, please refer to the official product support channels or contact customer service.