1. Introduction
This manual provides detailed instructions for the operation and maintenance of your BAOFENG MINI5 Portable Handheld Radio. Please read this manual thoroughly before using the device to ensure proper function and to maximize its lifespan. The BAOFENG MINI5 is an ultra-thin, pocket-sized walkie-talkie featuring 5W high power and dual-band reception. It incorporates one-key frequency copy technology for quick pairing with most mainstream walkie-talkies. With a built-in large-capacity battery and Type-C fast charging, it offers long standby time and clear, anti-interference sound quality. Its mini lightweight design makes it ideal for various applications including hotel, restaurant, beauty salon, construction sites, outdoor camping, self-driving tours, and team communication.

2. Package Contents
Verify that all items listed below are included in your package. If any items are missing or damaged, please contact your retailer.
| Item | Quantity (PCS) |
|---|---|
| Radio | 1 |
| Battery | 1 |
| Antenna | 1 |
| Belt Clip | 1 |
| Power Adapter | 1 |
| Lanyard | 1 |
| Operation Manual | 1 |
| Type-C cable | 1 |

3. Product Overview
Familiarize yourself with the various parts and controls of your BAOFENG MINI5 radio.

- Antenna
- SK1-Customized Function Keys/Monitor button
- PTT-A Button
- A/B button
- Menu button
- PTT-B Button
- Numeric Keypad/ Speaker
- Flashlight
- Volume/Power Knob
- Screen
- Accessory Port
- Exit button
- ▲Up button/▼ Down button
- Flashlight/Search button
- Microphone
- LED Indicator
- Battery Latch
- Type-C Charging indicator light
- Type-C Charging Port
- V/M-VFO/MR button
- Belt Clip
4. Setup
4.1 Attaching the Antenna
Turn the antenna clockwise until it is tight. To remove the antenna, turn it counterclockwise.
CAUTION:
- Do not hold the radio antenna in your hand, as this will reduce the performance of the radio and the life of the antenna.
- Do not shake the radio with the top of the antenna in your hand, as this will degrade the performance and life of the radio antenna.
4.2 Charging the Battery
When using the terminal for the first time, a low battery warning may occur. It is recommended to turn off the radio during charging. The battery's LEDs provide an indication of the current state of charge:
| Indicator Light | Charging Status |
|---|---|
| Red light is always on | Charging |
| Green light is always on | Charging complete |

5. Operating Instructions
5.1 Power On/Off and Volume Adjustment
- To turn your radio ON: Turn the [Volume/Power] rotary knob clockwise.
- To turn your radio OFF: Turn the [Volume/Power] rotary knob counterclockwise.
- To increase volume: Turn the [Volume/Power] rotary knob clockwise.
- To decrease volume: Turn the [Volume/Power] rotary knob counterclockwise.
CAUTION: Do not hold the radio close to your ear. If the volume is set to an uncomfortable level, it could hurt your ear.
5.2 Keypad Lock/Unlock
To avoid accidentally changing radio settings:
- Press and hold the [*] key to lock the keypad until the screen displays the "keypad lock" icon.
- In lock mode, you can turn the intercom on and off, adjust the volume, receive, transmit, send call tones, send emergency alerts, and listen to channels. All other functions remain locked.
- To unlock the keypad, press and hold the [*] key again until the "keypad lock" icon is no longer displayed.
5.3 Keypad Entry
You can enter radio aliases, channel aliases, numbers, etc., using the radio's numeric keypad.
- To switch between input methods, press the [#] key.
- Press [1] to enter a special character (except in numeric input mode, where the number 1 is entered).
- Press [0] to enter a space (except in numeric input mode, in which special characters are entered).
5.4 Channel Selection and Memory
- Selecting a Channel: Press the [V/M] button to toggle between VFO (Frequency) and Channel mode. Use the ▲/▼ buttons or the rotary encoder to select the desired channel. To enter a specific channel number, use the keypad (e.g., enter "064" for channel 64).
- Channel Memory: In Frequency and Standby mode, you can store frequencies and parameters.
- Press [MENU] [3] [MENU] [5]. The screen will display "MEMCH".
- Press [MENU] to enter the function. Use the ▲/▼ buttons to select the desired channel, then press [MENU] to store it. A sound tone will confirm success.
- Press [EXIT] to return to standby mode.
- Note: If you want to set CTCSS tones, DCS codes, or frequency offset, do so before storing the channel. Stored channels are displayed as "CH-".
- Deleting a Channel (DEL-CH): In VFO mode and standby mode:
- Press [MENU] [3] [MENU] [1] [6]. The screen will display "DELCH".
- Press [MENU] to enter the function. Use the ▲/▼ buttons or rotate the encoder to select the channel to delete, then press [MENU] to confirm.
- Note: Channel 1 cannot be deleted.
5.5 Band Switching and VFO Frequency Setting
- Main Band/Sub Band Switch: In standby mode, press the [A/B] key to toggle between the A and B bands. The highlighted band is the main band.
- VFO/Channel Switch: Press the [V/M] button to switch between VFO and channel display. VFO mode displays the VFO icon; MR mode displays the channel serial number.
- Setting VFO Frequency:
- Turn the radio to VFO mode, then press the [A/B] key to switch to the main channel.
- Input the VFO frequency directly with the keypad.
- Alternatively, use the ▲/▼ button or rotary encoder to adjust the VFO frequency in the set frequency step.
5.6 Communication Functions
- Call Service: All radios in the group must be set to the same channel and sub-code. To ensure optimal reception, keep the microphone 2.5 cm to 5 cm from your mouth when transmitting.
- Initiate a call: Select a channel, press and hold the [PTT-A] key (transmits on segment A, upper screen) or [PTT-B] key (transmits on segment B, lower screen). The red indicator light will be on. Speak into the microphone with a normal voice tone.
- Receive a call: After releasing the [PTT] key, the radio is in a receivable state. The green indicator light will be on when receiving a call.
- Emergency Alarm: In standby mode, press the preset [SOS] shortcut key to enable or disable the emergency alarm function.
- Flashlight: In standby mode, press the preset [LAMP] shortcut key or the flashlight button to turn the flashlight on or off.

Figure 5: The BAOFENG MINI-5 features a built-in LED flashlight for convenience. - FM Radio Function: Set the [SK1] key to the radio function via Menu >> Radio Set >> Press SK1.
- Turn on the radio and press the SK1 key [FM Radio] to enter radio mode. The screen displays the tuning frequency.
- Use ▲/▼ to search for radio channels at the preset step frequency.
- Press [#↑] to automatically search for radio channels; the screen displays 'SeeK..'.
- Press [EXIT] to switch frequency band between 65.0/75.0MHz.
- Press SK1 key [FM Radio] to exit radio mode.
- Monitor: Press and hold the pre-programmed [Monitor] key to enter monitor mode and listen for weak signals on the current channel. This also allows you to adjust the volume. Release the [Monitor] key to exit.
- Frequency Search: Press the pre-programmed [SEARCH] shortcut key or hold down the search button. The radio enters frequency search state, displaying "SEARCH....". Press [#Z] to switch the searching band (VHF/UHF). Frequency and CTCSS/DCS code will be displayed after search. Press [MENU] to save the channel.
- Reverse Frequency Function: Short press the [*] key in relay mode to invert receive and transmit frequencies. The screen shows an 'R' icon. This is useful in repeater channels with frequency differences.
- Talk Around Function: In repeater mode, press [*] to switch between Talkaround Mode and Repeater Mode. The screen displays 'T' (Talkaround) or 'R' (Repeater) icon. In Talkaround mode, receive frequency equals transmit frequency.
- Repeater Activation Tone: Turn on the radio, press and hold the [PTT] key, then press [SK1] to transmit 1750Hz audio to activate a repeater in hibernation.
- Voice-activated Transmission (VOX): Enable VOX to transmit automatically by voice without pressing PTT.
- In standby, press [MENU] [2] [MENU] [4] to enter Vox Switch.
- Press [MENU] [2] [MENU] [5] to enter Vox Level. Use ▲/▼ to select VOX level (1-9). A smaller value means higher sensitivity. The 'V' icon is displayed. Default is off.
- To turn off VOX, select OFF OFF. The 'V' icon disappears.
- Press [MENU] to save and return.
- Dual Watch: The radio can receive frequencies set for channel A or B.
- Press [MENU] [2] to enter Radio Set.
- Press [MENU] + ▲/▼ to select "15 Dual Watch".
- Press [MENU] to enter Dual Watch Setting, use ▲/▼ to select "On".
- Press [MENU] to save. The 'D' icon will be displayed.
- To turn off, repeat steps and select "Off". The 'D' icon disappears.
- Stopwatch Function: Press and hold the [MENU] key to enable. Press [MENU] to start, press again to stop, press [EXIT] to exit.
5.7 Menu Navigation
- Using Menu with Arrow Keys:
- Press [MENU] to enter.
- Use ▲/▼ buttons or encoder to navigate.
- Press [MENU] to select an item.
- Use ▲/▼ or encoder to select a parameter.
- Press [MENU] to confirm and save, or [EXIT] to cancel.
- Press [EXIT] to exit menu at any time.
- Using Menu with Shortcuts:
- Press [MENU] to enter.
- Use numeric keypad to enter menu item number.
- Press [MENU] to enter item.
- Use arrow buttons or numeric keypad for parameter.
- Press [MENU] to confirm and save, or [EXIT] to cancel.
- Press [EXIT] to exit menu at any time.
6. Wireless Programming (APP)
The BAOFENG MINI5 radio can be programmed wirelessly using a dedicated mobile application. Before programming, install the APP on your Android or iOS phone by scanning the QR codes below.


Programming Steps:
- Press [MENU] + [4] on the radio to enter Wireless CPS.
- Press [MENU] + ▲/▼ to select "On". The wireless programming icon will appear on the first line of the screen.
- Open the APP on your phone, enable Bluetooth and location services.
- Select the walkie-talkie model "5Rmini Series" in the APP and connect to the radio. A "connection successful" prompt will appear.
- Read Radio Data: After frequency reading is complete, click "program" in the APP to enter program details. Here you can program channel information, frequency mode, and optional functions.
- Save Profile: The APP allows you to save the programmed profile as a new profile with a custom name.
- Write Data to Radio: From the home page of the APP, select "program", then click "Write" to transfer the frequency data to the radio. The radio will automatically restart once the writing process is complete.
7. Technical Specifications
| Feature | Specification |
|---|---|
| Brand Name | BAOFENG |
| Model Number | MINI-5 |
| Walkie Talkie Type | Portable |
| Output Power (w) | 3w-5w |
| Maximum Range | 3km-5km |
| Receiver Frequency | FM 76-108 MHz; VHF 144-146MHz, UHF 430-440MHz |
| Transmission Frequency | VHF 144-146MHz, UHF 430-440MHz |
| Frequency Range | 108-136mhz, 400-470mhz |
| Channel Spacing | 25.0KHz (Wide)/12.5KHz (Narrow) |
| Memory Channel | 999 Groups |
| Storage Channel | 999 |
| Operation Voltage | DC 7.4 V ±10% |
| Battery Capacity (mAh) | 2200 |
| Battery Included | Yes |
| Dimensions | 107*52*37mm (Without Antenna) |
| Weight | 212g (Battery pack included) |
| Material | Plastic |
| Waterproof / Water-Resistant | No |
| Is_Display | Yes |
| Transmission current | ≤1600mA |
| Receive Sensitivity | 0.25μV (12dB SINAD) |
| Rated Audio Power Output | 1W @16 ohms |
| Receive current | ≤380mA |
| Connection for accessories | 2 pin Kenwood jack |
| Antenna impedance | 50 Ohms |
| Certification | CE, RoHS, FCC |
| Origin | Mainland China |
NOTE: All specifications may be modified without prior notice or liability.
8. Maintenance
- Clean the radio with a soft, damp cloth. Do not use harsh chemicals or solvents.
- Ensure the Type-C charging port is free of dust and debris.
- Store the radio in a dry, cool place away from direct sunlight and extreme temperatures.
- If the radio is not used for an extended period, remove the battery.
- Do not attempt to disassemble or repair the radio yourself. This will void the warranty.
9. Troubleshooting
If you encounter problems with your radio, refer to the following common issues and solutions:
- Radio does not power on: Ensure the battery is fully charged and properly installed. Turn the Volume/Power knob clockwise to power on.
- No sound or low volume: Adjust the volume knob. Check if the squelch is open (RSSI indicator). Ensure the radio is not in monitor mode unintentionally.
- Cannot transmit or receive: Verify that the radio is on the correct channel and frequency. Check antenna connection. Ensure the keypad is not locked.
- Poor signal quality: Check antenna connection. Ensure you are within the maximum range of communication. Obstructions like buildings or terrain can affect signal.
- Display quality: Some users have noted that the display quality may be less vibrant compared to other models. This is generally a characteristic of the product and not a defect.
If the problem persists, contact customer support.
10. User Tips
- Antenna Compatibility: The included whip antenna is SMA-male. If you wish to use an existing antenna with an SMA-female connector, an SMA-female to SMA-female conversion adapter relay may be required.
- Receiver Performance: The radio generally offers good sensitivity, making it effective for receiving signals.
- Display View Angle: Be aware that the display may have a more limited viewing angle compared to some other walkie-talkie models.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your local dealer or the manufacturer. Do not attempt to service the device yourself, as this may void any applicable warranties.
Manufacturer: PO FUNG ELECTRONIC (HK) INTERNATIONAL GROUP COMPANY LIMITED
Website: http://www.pofungshop.com
Email: sales@pofungshop.com
12. EU Declaration of Conformity
Baofeng and Pofung hereby declare that the radio equipment type listed in the technical specifications complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at:
http://www.pofung.cn/download.asp?EnBigClassName=EU%20DOC
For further information, contact your local Baofeng helpdesk or dealer, or send an email to wangjianhui@baofengradio.com.
Conditions of Use (EU)
The frequency band on which this device operates is subject to limitations and/or permissions for usage. Operators in EU countries must consult their respective competent authorities and possess a license or frequency assigned to them.
Waste Disposal (WEEE Directive)
The crossed-out trash can symbol on the equipment indicates that the product, at the end of its useful life, must be collected separately from other waste. Users should dispose of electronic and electrical waste at specialized collection centers or return it to the retailer when purchasing new equivalent equipment. Improper disposal may result in administrative sanctions.