GOYOJO MK3395TY-2

Contents

GOYOJO 7-in-1 Wi-Fi Weather Station User Manual

Model: MK3395TY-2 | Brand: GOYOJO

1. Introduction

Thank you for choosing the GOYOJO 7-in-1 Wi-Fi Weather Station. This professional multi-functional weather station provides comprehensive environmental monitoring, including temperature, humidity, wind speed, wind direction, rainfall, light intensity, and UV index. With Wi-Fi connectivity and Tuya Smart app integration, you can monitor your local weather conditions remotely and access historical data. This manual will guide you through the setup, operation, and maintenance of your new weather station.

GOYOJO 7-in-1 Wi-Fi Weather Station main components: outdoor sensor, display console, and remote sensor.

Figure 1: GOYOJO 7-in-1 Wi-Fi Weather Station overview, showing the outdoor sensor, display console, and remote sensor, highlighting features like wind speed, direction, weather forecast, temperature, humidity, time, and alarm.

2. Package Contents

Please check the package contents to ensure all items are present:

Package contents of the GOYOJO weather station including outdoor sensor, display console, remote sensor, USB cable, screws, user manual, and certificate.

Figure 2: Contents of the GOYOJO Weather Station package.

  • Multi-combination Wireless Outdoor Sensor
  • 7-inch Color Display Console
  • Temperature | Humidity Wireless Remote Sensor (optional, may be sold separately)
  • USB Power Cable
  • Mounting Screws (for outdoor sensor)
  • User Manual
  • Verification of Conformity Certificate

3. Setup

3.1. Setup Preparation

Before you begin, ensure you have the following items (not included):

  • Crosshead screwdriver and hex driver for assembly.
  • Fresh Batteries:
    • 2 x AA alkaline or lithium batteries for the display console.
    • 3 x AA alkaline or lithium batteries for the multi-combination wireless outdoor sensor.
    • 2 x AAA alkaline or lithium batteries for the optional Temperature | Humidity Wireless Remote Sensor.

For Best Results:

  • Remove the weather station console and all sensors from their packaging and place them together on a table or bench within easy reach.
  • Keep batteries and screwdrivers nearby.
  • After installing batteries, keep all sensors and the console within 0.15-0.3 meters (5-10 feet) of each other for at least 15 minutes to allow them to connect repeatedly and establish stable communication.

3.2. Download Tuya Smart App

The GOYOJO Weather Station integrates with the Tuya Smart system for remote monitoring and control. Download the app:

  1. Search for "Tuya Smart" in your device's app store (iOS App Store or Android Google Play).
  2. Download and install the app.
  3. Register for an account and log in.
  4. Ensure your mobile device is connected to the 2.4GHz Wi-Fi network that your weather station will connect to. This is crucial for device pairing.

3.3. Quick Setup

  1. Insert 3 AA batteries into the multi-combination wireless outdoor sensor.
  2. Plug the power cord into the display console.
  3. Open the Tuya Smart app on your mobile phone, log in, and follow the app prompts to pair the weather station with your Wi-Fi network and server.
  4. Configure basic settings via the app or directly on the console (time, date, units, etc.).
  5. Insert 2 AA batteries into the display console (these act as a backup power source to retain settings if the power adapter is disconnected).
  6. After 5 minutes, move the outdoor sensor to its desired outdoor location.

3.4. Wi-Fi Pairing

The weather station must be paired with your 2.4GHz Wi-Fi network. This product only supports 2.4GHz wireless networks.

  1. Once the weather station starts, it will automatically enter AP (Access Point) mode. The time bar will display "00 AP", then "01 AP", indicating it's ready for pairing.
  2. Open the Tuya Smart app. A pop-up window for discovering devices should appear. Click "Add" and follow the prompts to switch to Wi-Fi settings within the app.
  3. Follow the in-app instructions: set your Wi-Fi network name (SSID) and password.
  4. The app will show the pairing process. Wait for it to complete, then click "Finish" to return to the main interface. This confirms successful pairing.

Note:

  • If the console does not automatically enter pairing mode on first power-on, press and hold the "-" button for more than 3 seconds to manually enter pairing mode.
  • After successful pairing, the weather station will automatically connect to WLAN, update network time, and begin searching for signals from wireless sensors. The wireless receiving icon will blink for about 3 minutes. If the outdoor sensor is working correctly, the console will display outdoor temperature and humidity within 1-2 minutes.

3.5. Wireless Sensor Connection

The weather station can connect to one multi-combination wireless outdoor sensor and up to three additional temperature/humidity wireless sensors (sold separately).

  • The console automatically searches for and registers all wireless sensors within 3 minutes of power-on. Each sensor generates a random ID.
  • On the main display, press the "CH" button (B8) to cycle through the outdoor temperature and humidity values from different channels (multi-combination sensor, CH1, CH2, CH3).
  • In loop mode, the display cycles through each channel every 5 seconds. Wind speed, direction, and rainfall values always come from the multi-combination sensor.
  • If a sensor signal is lost or not connected, the channel value will display as "--".
  • To add or replace a sensor: Switch to the desired channel using the "CH" button, then press and hold "CH" for more than 3 seconds. The console will search for a signal for 3 minutes and add the new sensor. Ensure the sensor is powered on before re-adding.
  • When the low voltage icon appears for a channel, replace the batteries for that sensor and then re-add it.

3.6. Mounting Instructions for Wireless Sensors

3.6.1. Multi-combination Wireless Outdoor Sensor

Mount the outdoor sensor in an open area, clear for at least 15 meters (50 feet) in all directions, away from obstructions that could affect wind, rain, or sunlight readings.

Diagram showing two methods for mounting the multi-combination wireless outdoor sensor.

Figure 3: Installation methods for the multi-combination wireless outdoor sensor.

  • Mount the sensor on a sturdy platform or bracket, ideally 1.5 meters (5 feet) above the ground.
  • Screw the sensor base to the platform and secure the support frame. Tighten the large nut that secures the support rod.
  • When installing, adjust the sensor body so that the solar panel faces South. This ensures accurate wind direction readings. Use a compass to verify the "N" (North) embossed mark on the sensor aligns with true North.
  • Use the top bubble level on the sensor to ensure it is perfectly level. An unlevel sensor will affect rainfall reading accuracy.
Diagram illustrating the importance of using the bubble level during outdoor sensor installation.

Figure 4: Ensure the sensor is level using the built-in bubble level for accurate rainfall measurements.

3.6.2. Temperature | Humidity Wireless Remote Sensor (Optional)

If you have an additional temperature/humidity remote sensor, you can mount it as follows:

Diagram showing two options for mounting the temperature and humidity wireless remote sensor.

Figure 5: Mounting options for the optional temperature/humidity remote sensor.

  • Option 1 (Hanging): Mount screws to the wall, then hang the sensor on the screws.
  • Option 2 (Direct Mount): Insert mounting screws through the front of the sensor into the wall.
  • Tighten screws snugly but do not overtighten.
  • For outdoor placement, install the sensor on a north-facing wall or in any shaded area to avoid direct sunlight, which can cause higher temperature readings.
  • Preferred locations include under eaves or under a deck.
  • Ensure the sensor is installed vertically to allow moisture to vent properly.

4. Operation

4.1. Time and Unit Settings

To enter time and unit setting mode:

  1. Press and hold the "SET" button (B2) for 3 seconds.
  2. Use the "MEM" (B4) or "WIFI" (B5) buttons to adjust values. Hold them to adjust quickly.
  3. Press "SET" to confirm and move to the next item.
  4. To exit: Wait 20 seconds without pressing any buttons, or double-click the "SNOOZE/LIGHT" touch position (B1).

Settings Order:

  1. Temperature unit: °C / °F
  2. Pressure unit: hPa / inHg / mmHg
  3. Air pressure setting: absolute or relative
  4. Wind speed unit: km/h / mph / m/s / knots
  5. Wind degree (angle) or direction (letter) selection
  6. Rainfall unit: MM / inch
  7. Light unit: Klux / Kfc / W/m²
  8. Hour format: 24Hr / 12Hr
  9. Hour
  10. Minutes
  11. Calendar display format: Month/Date / Date/Month
  12. Year
  13. Month
  14. Date
  15. Week display language (15 options, see table below)
  16. Initial weather forecast

Week Language Display Table:

LanguageSunMonTueWedThuFriSat
EnglishSUNMONTUEWEDTHUFRISAT
GermanSONMONDIEMITDONFRESAM
FrenchDIMLUNMARMERJEUVENSAM
ItalianDOMLUNMARMERGIOVENSAB
SpanishDOMLUNMARMIEJUEVIESAB
PortugueseDOMSEGTERQUAQUISEXSAB
DutchZONMAADINWOEDONVRIZAT
DanishSONMANTIRONSTORFRELOR
NorwegianSONMANTIRONSTORFRELOR
SwedishSONMANTISONSTORFRELOR
PolishNIEPONWTOSROCZWPIASOB
FinnishSUNMANTIIKISTORPERLAU
CzechNEDPONUTESTRCTVPATSOB
HungarianVASHETKEDSZECSUPENSZO
SlovakNEDPONUTOSTRSTVPIASOB

4.2. APP Settings (Unit, Alarm, Backlight)

When connected to Wi-Fi, the weather station's time automatically calibrates to local time. You can adjust various settings via the Tuya Smart app:

  1. On the APP Home screen, tap the "Settings" icon.
  2. Navigate to the desired menu (e.g., "Unit Settings", "Alarm Setting", "Backlight Setting") to configure options.

4.3. Alarm and Snooze Settings

The weather station features two daily alarms with snooze functionality.

To set alarms:

  1. Press and hold the "ALARM" button (B3) for 3 seconds to enter alarm setting mode.
  2. Use "MEM" or "WIFI" buttons to adjust values. Press "ALARM" to confirm and move to the next item.
  3. To exit: Wait 20 seconds or double-click the "SNOOZE/LIGHT" touch position (B1).

Alarm Settings Order:

  1. Alarm 1 Hour
  2. Alarm 1 Minutes
  3. Alarm 1 Repeat: M-F (weekdays) | S-S (weekends) | M-S (every day)
  4. Alarm 1 Snooze Time: 5 to 60 minutes | OFF
  5. Alarm 2 Hour
  6. Alarm 2 Minutes
  7. Alarm 2 Repeat: M-F | S-S | M-S
  8. Alarm 2 Snooze Time: 5 to 60 minutes | OFF

Notes:

  • Alarm will sound for 2 minutes. If not deactivated, it will repeat after 24 hours.
  • Snooze time range: 5-60 minutes. Setting to OFF disables snooze.
  • Alarm sound is a rising crescendo over 2 minutes, changing volume 4 times.
  • To switch off an alarm: When the alarm sounds, press any button except "SNOOZE/LIGHT" or press and hold "SNOOZE/LIGHT" for >3 seconds.
  • To activate snooze: When alarm sounds, touch and release "SNOOZE/LIGHT". The alarm will stop and ring again after the set snooze time.

4.4. Weather Forecast

The weather station calculates a 12-hour weather forecast based on atmospheric pressure trends. This is an approximate indication and should be cross-referenced with professional meteorological services for critical planning.

Weather Icons:

  • Sunny
  • Mostly Cloudy
  • Cloudy
  • Rainy
  • Thunder Rainy
  • Snow (appears if outdoor temp is below -4°C / 25°F and forecast is rainy/thunder rainy)

After 7-10 days of air pressure calibration, the forecast accuracy will stabilize at 70-75%.

4.5. Reading and Recording Data

4.5.1. Temperature, Humidity, Light Intensity, UV Index, Air Pressure

  • Press the "WIFI" button (B5) to cycle through "Feels Like Temperature", "Dew Point Temperature", "Heat Index", and "Wind Chill". These values are derived from the multi-combination outdoor sensor. The display will revert after 20 seconds.
  • Press the "MEM" button (B4) to view maximum and minimum records for temperature, humidity, and light intensity.
  • To clear history: While viewing max/min records, press and hold "WIFI" for 3 seconds. Values will reset to "--" then display current readings.
  • Trend indicators:
    • Up arrow: Value is rising.
    • Down arrow: Value is dropping.
    • Horizontal arrow: Value remains unchanged.
  • UV Index indications: LOW (0-2), MODERATE (3-5), HIGH (6-7), VERY HIGH (8-10), EXTREME (11+).

4.5.2. Wind Readings

  • Press and hold the "WIND" button (B6) for 3 seconds to cycle through wind direction, wind gusts, or average wind speed.
  • Wind Speed: Average speed over the past 30 seconds.
  • Gust Wind Speed: Maximum average wind speed every 3 seconds for 30 seconds.
  • Average Wind Speed: 10-minute average wind speed.
  • Wind Direction: Displayed in letters or degrees.

4.5.3. Rain Readings

  • Press and hold the "RAIN" button (B7) for 3 seconds to switch between cumulative rainfall or rainfall rate.
  • Press "RAIN" to view rain history: Event | Hourly | Daily | Weekly | Monthly | Yearly | Total.
  • Event: Cumulative rainfall for the current rain event (ends after 30 minutes of no rain).
  • To clear rain history: While viewing rain history, press and hold "RAIN" for 3 seconds. Reading will reset to 0.

4.5.4. Historical Data Curves in APP

The Tuya Smart app allows you to view historical changes of all detected data in curve charts (daily, weekly, monthly, yearly). Tap the "Statistics" icon on the Home screen to access this feature.

4.6. Background Lighting

  • Battery Powered: Press "SNOOZE/LIGHT" (B1) to light the backlight for 15 seconds.
  • Power Adapter Connected: Backlight is always on. Press "SET" (B2) to adjust brightness (5 levels: 4 brightness levels + OFF).
  • Night Mode: Press and hold "SNOOZE/LIGHT" for 3 seconds to enter night mode settings.
    1. Night mode on/off
    2. Backlight brightness setting at night
    3. Hour setting for night entry time
    4. Minute setting for night entry time
    5. Hour setting of night exit time
    6. Minute setting of night exit time
  • In night mode, the backlight automatically switches to the set night brightness during the specified hours and returns to original brightness outside those hours.

5. Maintenance

5.1. Cleaning the Rain Sensor

The rain sensor structure needs regular cleaning (recommended every 1-3 months, depending on rainfall frequency).

Diagram showing how to clean the rain sensor by removing the funnel.

Figure 6: Cleaning the rain sensor funnel.

  1. Remove the rainwater funnel (turn it according to the rotation direction shown in the diagram).
  2. Gently remove any debris or insects from the rain sensor.
  3. Remove debris from the rainwater funnel itself, especially from the funnel drain.
  4. Clean any debris from the main drain.
  5. Reinstall the rainwater bucket.
  6. Do not apply oil to the rain sensor.

5.2. Battery Replacement

When the battery icon appears on the display console for the "Indoor sensor" column or for any specific channel, it indicates low battery for that component. Replace batteries as soon as possible with fresh ones of the correct type (AA or AAA as specified).

6. Troubleshooting

  • No data display on console:
    • Ensure the power adapter is connected and batteries are installed in the console.
    • Check if batteries are correctly inserted and fresh in all sensors.
    • Verify sensors are within range (100m/328ft in open area) and not blocked by thick walls.
    • Try re-pairing sensors (see Section 3.5).
  • Incorrect temperature/humidity readings:
    • Ensure outdoor sensors are not in direct sunlight or near heat sources.
    • Verify the outdoor sensor is level for accurate rain readings.
    • Allow 15 minutes for sensors to stabilize after setup.
  • Wi-Fi connection issues:
    • Ensure your Wi-Fi network is 2.4GHz (5GHz is not supported).
    • Check Wi-Fi password and network name.
    • Move the console closer to your Wi-Fi router during pairing.
    • Restart your router and try pairing again.
  • Weather forecast inaccurate:
    • Allow 7-10 days for the station to calibrate atmospheric pressure for better accuracy.
    • Remember it's a local forecast and may differ from regional weather services.

7. Specifications

Table of weather station measurement specifications for temperature, humidity, rain, wind, barometric pressure, UV index, and sunlight.

Figure 7: Weather Station Measurement Specifications.

FeatureSpecification
Model NumberMK3395TY-2 (GWD-WT-17+TX09)
Perpetual CalendarUp to Year 2099
Network Time ServiceAutomatic calibration
Day of Week Languages15 languages (English, German, French, Spanish, Italian, Dutch, Danish, Portuguese, Norwegian, Swedish, Polish, Finnish, Czech, Hungarian, Slovak)
AlarmsTwo daily alarms with snooze (OFF or 5-60min)
Indoor Temperature Range-20°C to 50°C (-4°F to 122°F)
Outdoor Temperature Range-40°C to 70°C (-40°F to 158°F)
Indoor/Outdoor Humidity Range20% to 95%
Atmospheric Pressure Range600 to 1100 hPa (17.72 to 32.48 inHg or 450 to 825.1 mmHg)
Rainfall Measurement0 to 9999mm (0-393.6 inches)
Wind Speed Measurement0 to 180 km/h (0 to 111 mph)
Wind Direction Measurement0 to 359 degrees
Beaufort Wind ScaleDisplay of 12 levels
Light Intensity Measurement0 to 128 klux (0 to 1378 kfc)
UV Index Measurement0 to 15 level (Level 5 UVI sun exposure indication)
Wireless Transmission Frequency433.92MHz RF
Wireless Transmission Range100 meters (328 feet) in open area
Display BacklightLevel 4 display backlight
Console Power InputDC 5V >1A (Power cord or adapter)
Console Battery2 x LR6 AA 1.5V (backup)
Outdoor Sensor Battery3 x LR6 AA 1.5V (solar-assisted)
Remote Sensor Battery2 x LR6 AAA 1.5V (optional)
Product size diagram showing dimensions of the outdoor sensor and the display console.

Figure 8: Product dimensions for the outdoor sensor and display console.

8. User Tips

  • Optimal Sensor Placement: For the most accurate readings, ensure the outdoor sensor is mounted in an open area, away from buildings, trees, or other obstructions that could block wind, rain, or direct sunlight. The solar panel should face south.
  • Wi-Fi Stability: If you experience frequent disconnections, try moving your Wi-Fi router closer to the display console or ensure there are no major interferences (e.g., thick walls, other 2.4GHz devices) between them.
  • Battery Life: While the outdoor sensor is solar-assisted, regular battery checks are recommended, especially before winter, as cold weather can reduce battery efficiency.
  • App Notifications: Utilize the Tuya Smart app's notification features to stay informed about significant weather changes or alerts, if available.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact GOYOJO customer support:

  • Email: tools@goyojo.com
  • WhatsApp/Phone: +1 (571)353-8614

Manufacturer: GOYOJO Industrial Technology (Shenzhen) Co., Ltd.

Address: Shenlan Bldg, No.1 Lianteng Rd, Guangming, Shenzhen, 518107 China

Important Safety Information:

Warning: Handle with care, this product contains fragile glass components.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.