1. Safety Information
Please read all instructions carefully before installation and use. Keep this manual for future reference.
- Do not attempt to modify the antenna or its components.
- Ensure the installation area on your vehicle is clean and dry before applying the antenna.
- Avoid dropping the product.
- Keep out of reach of children.
2. Product Features
- Enhanced Signal: Designed to improve FM/AM radio signal reception.
- Stylish Design: Shark fin streamlined design for a modern and distinctive car exterior.
- Easy Installation: No drilling required, simple adhesive mounting.
- Durable Material: Constructed from high-quality ABS material.
- Universal Fit: Suitable for most cars (ensure base compatibility).
3. Specifications
| Attribute | Value |
|---|---|
| Item Type | Aerials |
| Height | 65mm / 2.56 inches |
| Width | 70mm / 2.76 inches |
| Length | 170mm / 6.69 inches |
| Material | High-Quality ABS Material |
| Available Colors | Black, Blue, Gold, Grey, Red, Silver, White |
| Origin | Mainland China |
| Wireless | No |
Note: If the base of your original antenna is larger than the dimensions provided, this shark fin antenna may not fit your car.
4. Installation Guide
Follow these steps for easy, no-drilling installation:
- Prepare the Area: Clean the car roof surface where the antenna will be installed. Ensure it is free of dust, dirt, and moisture.
- Remove Original Antenna: Unscrew and remove your car's existing rod antenna.
- Connect Signal Cable: Connect the FM/AM connection cable from the shark fin antenna to the antenna base on your car.
- Test Signal (Optional but Recommended): Before final adhesion, temporarily place the shark fin antenna over the base and test your radio signal to ensure proper function.
- Prepare Adhesive: Peel off the protective film from the 3M adhesive tape on the bottom of the shark fin antenna. For better adhesion, especially in colder weather, you can gently heat the adhesive with a hairdryer or car heater.
- Position and Adhere: Carefully align the shark fin antenna over the car's antenna base and press firmly to secure it in place. Apply even pressure for a few moments to ensure good contact.
5. Operating Instructions
The Shark Fin Car Antenna operates passively to receive FM/AM radio signals. Once correctly installed, no further user interaction is required for its primary function. It will automatically enhance your car's radio reception and serve as an aesthetic upgrade.
6. Maintenance
To ensure the longevity and appearance of your shark fin antenna:
- Regularly clean the antenna with a soft cloth and mild car soap.
- Avoid using abrasive cleaners or harsh chemicals that could damage the finish.
- Inspect the adhesive periodically to ensure it remains securely attached to the vehicle.
7. Troubleshooting
- Antenna does not fit my car:
- Ensure the base of your original antenna is not larger than the dimensions specified in Section 3. This antenna is designed to cover standard screw-in antenna bases.
- Poor signal reception after installation:
-
- Verify that the internal FM/AM connection cable is securely attached to your car's antenna base.
- Ensure the antenna is properly grounded if your vehicle's system requires it (though typically not needed for passive antennas).
- Test the signal before final adhesion as described in the installation steps. If signal issues persist, contact customer support.
- Antenna is not adhering properly:
-
- Ensure the installation surface was thoroughly cleaned and dried before application.
- Apply heat to the 3M adhesive tape (e.g., with a hairdryer) before pressing the antenna onto the surface, especially in cold weather, to improve adhesion.
- Apply firm, even pressure for an extended period during installation.
- Product not functioning as expected:
- If you encounter any other issues, please contact after-sales service for assistance.
8. User Tips
- Pre-Installation Check: Always measure the base of your existing antenna to confirm compatibility with the shark fin antenna's dimensions before starting installation.
- Optimal Adhesion: For best results, install the antenna on a warm day or use a hairdryer to warm both the car surface and the adhesive tape before application. This helps create a stronger bond.
- Signal Test: It's highly recommended to connect the antenna and test your radio signal briefly before fully pressing down the adhesive. This allows you to troubleshoot any signal issues before the antenna is permanently affixed.
9. Warranty and Support
For any product-related inquiries, technical support, or warranty claims, please contact the seller or manufacturer's after-sales service.
A detailed user manual in PDF format may also be available. You can refer to the official PDF user manual for additional information.