Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your YFK Smart Handle Lock. Before installing the smart lock, please read this manual carefully and keep it in a safe place for future reference.
The YFK Smart Handle Lock offers multiple unlocking methods including Fingerprint, APP, Password, and Mechanical Key, integrating smart home security and convenience.
Product Overview
The YFK Smart Handle Lock is designed for versatile access control, offering four distinct ways to unlock your door:
- Fingerprint Unlock: Quick and secure access using biometric identification.
- APP Unlock: Control and manage your lock remotely via the Tuya Smart App.
- Password Unlock: Enter a PIN code on the digital keypad.
- Key Unlock: Traditional mechanical key for emergency access.
Components and Features
The lock features a digital area for password entry, a swipe zone, and a fingerprint area for biometric authentication. It also includes a reset button, a lock button, a 5V Type-C emergency power port (not rechargeable), and a keyhole.
Package Contents
Please verify that all parts are included in your package before proceeding with installation:
- Front Pane Rear Panel (x1)
- Latch (x1)
- Strike Plate (x1)
- Strike Box (x1)
- Key (x2)
- 95mm Square Bar (x1)
- 125mm Square Bar (x1)
- 35mm Screw tube (x3)
- M4x45mm Screw (x3)
- M4x55mm Screw (x3)
- M4x21mm Screw (x4)
- Support beam (x2)
- Lock cylinder (x1)
- Plate (x1)
- Silver screws (x3)
- Black screws (x6)
- Spring (x1)
Installation
Before installation, ensure you have the correct square rod for your door thickness:
- For doors 30-40 mm thick: Use a 95 mm square rod.
- For doors 40-50 mm thick: Use a 95 mm square rod with the included spring.
- For doors 50-60 mm thick: Use a 125 mm square rod.
Installation Steps
For a visual guide, please refer to the installation video below:
Video 1: Smart Door Handle Lock Installation Guide.
- Read the manual and check all parts: Unpack the lock and verify all components are present against the package contents list.
- Install the lock body properly: Ensure the lock body is correctly positioned within the door.
- Install nuts onto the exterior door handles: Secure the nuts to the exterior handle.
- Route the lock's built-in wires through the square pole: Carefully thread the wires through the square pole.
- Align the square drive bar precisely and insert it through the lock body: Ensure the square bar is correctly aligned and inserted.
- Insert the screw tube: Place the screw tube into the designated slot.
- Route the square bar and cable through the lock cylinder hole: Pass the square bar and cable through the lock cylinder opening.
- Extend the screw tube through the locking holes on both sides: Push the screw tube through the holes on both sides of the lock.
- Install the inside handle:
- Open the battery cover on the interior handle and thread the cable through it.
- Align the square bar with the hole on the inner handle, then insert it.
- Insert the cable into the open port.
- Insert 4 AAA batteries.
- Close the battery cover and tighten the screws.
- Install and tighten the screws: Secure all screws to ensure the lock is firmly attached.
- Connect the interface: Ensure all electrical connections are properly made.
Important Notes:
- Please be sure to install the batteries after the door lock is installed.
- The lock's rotating components must operate smoothly and flexibly.
- Use high-quality LR03 alkaline batteries. Ensure all 4 batteries are brand new, then close the battery cover.
Operating Instructions
1. Fingerprint Enrollment
- Click the "Add" button in the app.
- Repeatedly place the center of your finger on the sensor and capture five distinct fingerprint locations to complete enrollment.
- Ensure your finger and the sensor are clean and dry during enrollment.
2. Password Recording
- Click the "Add" button in the app.
- Enter a 6-8 digit door-opening password.
- Click "Save".
The lock supports a 16-digit virtual password for eavesdropping prevention. You can enter any numbers before and after your correct PIN to hide it.
3. Temporary Password
In the app, click the "Add" button to create temporary password patterns as needed. This is useful for granting temporary access to guests or service providers.
4. App Connection (Tuya Smart App)
To connect your smart lock with the Tuya Smart App:
- Download the Tuya Smart App from your mobile application market (search for "Tuya" or "Smart Life").
- Open your phone's Bluetooth and Location services.
- Open the Tuya Smart App.
- On the main interface, click "Add Device".
- The app will search for nearby devices. Ensure your lock is in pairing mode.
- Once the "Smart Handle Lock" is found, click to connect.
- After successful connection, you can manage the lock through the app.
Note: After pairing with a Bluetooth gateway (recommended for remote functionality), you need to wake up the lock by touching the panel before it can be unlocked remotely.
5. Managing Users and Devices via App
- Add/Remove Members: From the app's homepage, you can add or remove members and change their access names.
- Remove Device: To remove the device, navigate to the settings (top-right corner), select "Help Center", then "Remove Device". Confirm unbinding and clearing data. This will reset the lock to factory settings.
Maintenance
- Battery Replacement: When you hear the low voltage alarm (indicator flashes three times below 4.3V), replace the batteries immediately. Do not mix new and old batteries or different types of batteries.
- Cleaning: Keep your fingers clean and dry when using the fingerprint sensor and keypad to ensure optimal performance and longevity.
- General Care: Ensure the lock's rotating components operate smoothly and flexibly. Avoid exposing the lock to extreme temperatures or humidity outside its operating range.
Troubleshooting
- Lock Malfunction/Battery Depletion: This lock requires a mechanical key for manual unlocking. Always keep the mechanical key in a secure place for immediate use when needed.
- Anti-Theft Alarm: If three consecutive failed attempts are made to unlock the device, the lock system will automatically enter a 90-second lockdown to prevent forced entry.
- Remote Unlocking Issues: If remote unlocking via the app is not working, ensure the Bluetooth gateway is connected and wake up the lock by touching the panel before attempting to unlock remotely.
- App Connection Issues: If you encounter issues connecting to the app, ensure Bluetooth and Location services are enabled on your phone.
Contacting Support via App
If you encounter any issues or have suggestions, you can submit feedback through the app:
- Tap the Settings button in the top-right corner of the app.
- Select "Help Center".
- Then tap "Feedback".
- Select the issue type (e.g., Device problems, Third-party problems, App problems, Other problems).
- Select the category that best describes your situation.
- Describe the issue in detail and attach up to three images or videos if relevant.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | YFK |
| Power Supply | DRY BATTERY (4 x AAA batteries) |
| Operating Voltage | 6V |
| Standby Power Consumption | <65 uA |
| Operating Power Consumption | ≤250 mA |
| Low Voltage Alert | 4.5V ± 0.2V (indicator flashes three times below 4.3V) |
| Type-C Power Supply | 5V 1A (power supply only, not for charging) |
| Operating Temperature | -20°C to 70°C |
| Operating Humidity | 20% to 90% RH |
| Compatible Door Thickness | 30-60 mm |
| Ways To Unlock | App, Mechanical Keys, Password, FINGERPRINT |
| Smart Home Platform | Tuya |
| Admin ID Range | 3 |
| User ID Range | 197 |
| Max Unlock Records Capacity | 200 (fingerprints/PIN) |
| Fingerprints Capacity | Up to 100 sets |
| PIN Capacity | Up to 100 sets (16-digit virtual password) |
| IC Cards Capacity | Up to 100 sets |
Product Dimensions
User Tips
Based on common user experiences, here are some tips for optimal use:
- For remote unlocking, ensure a Bluetooth gateway is connected and the lock is 'woken up' by touching the panel before attempting to unlock via the app.
- Regularly check battery levels and replace all four AAA batteries simultaneously with new, high-quality LR03 alkaline batteries when the low voltage alarm sounds.
- Keep the mechanical keys in a safe, accessible location outside the locked area for emergency access.
- When enrolling fingerprints, try to capture different angles and pressures for better recognition accuracy.
Warranty and Support
For detailed warranty information and further support, please refer to the official user manual PDF available at: YFK Smart Handle Lock User Manual (PDF).
You can also contact customer support directly through the Tuya Smart App by following the steps outlined in the Troubleshooting section.