mrhello 12617508002

Contents

mrhello Oil Level Sensor Switch User Manual

Model: 12617508002

1. Product Overview

The mrhello Oil Level Sensor Switch (OEM Part Number: 12617508002) is a critical component designed to monitor the engine oil level in compatible BMW vehicles. This sensor provides accurate readings to the vehicle's engine management system, helping to prevent engine damage due to low oil levels. It is a direct replacement part for various BMW 5 Series (E39) and 7 Series (E38) models.

Video: 360-degree view of the mrhello Oil Level Sensor Switch.

2. Safety Information

  • Always ensure the vehicle's engine is cool before attempting any installation or maintenance.
  • Disconnect the vehicle's battery before starting installation to prevent electrical shorts or injury.
  • Wear appropriate personal protective equipment, such as gloves and eye protection.
  • Avoid moisture contact with the sensor and its electrical connectors.
  • Keep this product out of reach of children.
  • If you are unsure about any step of the installation process, consult a qualified automotive technician.

3. Package Contents

  • 1x mrhello Oil Level Sensor Switch (OEM: 12617508002)

4. Specifications

Part Number (OEM)12617508002, 12611702842, 1433509, 7508002, 1702842, 12611433509
TypeOil Level Sensor
Brandmrhello
OriginMainland China
Package Dimensions (Approx.)Length: 17 cm, Width: 10 cm, Height: 8 cm
Package Weight (Approx.)0.195 kg
Compatible ModelsBMW 5 Series (E39): 520i, 523i, 528i (Sedan & Touring, specific years up to 09.1998 for M52 engines)
BMW 7 Series (E38): 728i (Specific years)
mrhello Oil Level Sensor Switch, main view with part numberBottom view of the oil level sensor

Images: Front and bottom views of the oil level sensor.

5. Installation Instructions (Setup)

This procedure requires basic mechanical knowledge and tools. If you are not confident, please seek professional assistance.

  1. Preparation: Ensure the vehicle is parked on a level surface and the engine is cool. Disconnect the negative terminal of the vehicle's battery.
  2. Locate the Sensor: The oil level sensor is typically located at the bottom of the engine oil pan. You may need to lift the vehicle safely using jack stands and remove any underbody shields for access.
  3. Drain Engine Oil (if necessary): Depending on the sensor's exact location and design, it might be necessary to drain the engine oil before removal to prevent spillage. Refer to your vehicle's service manual.
  4. Disconnect Electrical Connector: Carefully disconnect the electrical connector from the old oil level sensor.
  5. Remove Old Sensor: Unscrew or unclip the old oil level sensor from the oil pan. Be prepared for any residual oil to drip.
  6. Install New Sensor: Ensure the new sensor has its O-ring or gasket properly seated. Mount the new mrhello oil level sensor onto the device (oil pan) and ensure secure fixation. Tighten to the manufacturer's specified torque if available.
  7. Reconnect Electrical Connector: Firmly attach the electrical connector to the new sensor.
  8. Refill Engine Oil (if drained): If oil was drained, refill it to the correct level according to your vehicle's specifications.
  9. Reassemble: Reinstall any removed underbody shields and lower the vehicle.
  10. Reconnect Battery: Reconnect the negative terminal of the battery.
  11. Check for Leaks: Start the engine and let it run for a few minutes. Carefully check around the sensor for any oil leaks.
  12. Verify Function: Check your vehicle's dashboard for any oil level warnings. If the warning persists, refer to the troubleshooting section.

6. Operating Instructions

The oil level sensor operates automatically as part of your vehicle's engine management system. It continuously monitors the engine oil level and sends data to the vehicle's computer. There are no manual operating steps for the sensor itself.

  • Dashboard Indicators: Pay attention to your vehicle's dashboard warning lights. A low oil level warning light indicates that the sensor has detected an insufficient oil level.
  • Regular Checks: While the sensor provides continuous monitoring, it is still recommended to manually check your engine oil level with the dipstick periodically, as per your vehicle manufacturer's recommendations.

7. Maintenance

The mrhello Oil Level Sensor Switch is designed to be a maintenance-free component. However, regular visual inspections can help ensure its longevity and proper function:

  • During routine oil changes, visually inspect the sensor for any signs of physical damage, corrosion, or oil leaks around its seal.
  • Ensure the electrical connector is clean, dry, and securely attached.
  • If any damage or leaks are observed, consider replacing the sensor.

8. Troubleshooting

If you experience issues after installing the oil level sensor, consider the following:

  • Persistent Low Oil Warning:
    • Check Oil Level Manually: Verify the actual engine oil level using the dipstick. If it's genuinely low, add oil.
    • Check Electrical Connection: Ensure the sensor's electrical connector is fully seated and free from corrosion.
    • Sensor Compatibility: Double-check that the OEM part number (12617508002) matches the requirements for your specific vehicle model and year.
  • Oil Leak Around Sensor:
    • Ensure the sensor was tightened correctly and that the O-ring/gasket is properly seated and not damaged.
    • If the leak persists, the sensor may need to be reinstalled with a new gasket or the sensor itself might be faulty.
  • Difficulty Installing:
    • Ensure you have the correct tools and access to the sensor location.
    • Verify that all accessories (like gaskets) are included and used correctly.
    • Refer to your vehicle's specific service manual for detailed instructions.
  • Other Engine Warning Lights: If other engine warning lights appear, it may indicate a broader issue. A diagnostic scan tool can help identify specific fault codes.

If troubleshooting steps do not resolve the issue, it is recommended to consult a professional automotive technician.

9. User Tips

  • Always use the correct type and viscosity of engine oil specified by your vehicle manufacturer.
  • When replacing the sensor, ensure the area around the oil pan is clean to prevent contaminants from entering the engine.
  • Consider replacing the engine oil and oil filter when replacing the oil level sensor, especially if you had to drain the oil.

10. Frequently Asked Questions (FAQ)

Q: Is this sensor compatible with my BMW?
A: This sensor is compatible with specific BMW 5 Series (E39) and 7 Series (E38) models, particularly those using the M52 engine up to certain production years. Please cross-reference the OEM part number (12617508002) with your existing sensor or your vehicle's requirements to confirm compatibility.
Q: Do I need to drain the oil to replace this sensor?
A: In most cases, yes, as the sensor is typically located in the oil pan below the oil level. Refer to your vehicle's service manual for the exact procedure.
Q: What if the low oil warning light stays on after replacement?
A: First, manually check your oil level with the dipstick. If the level is correct, check the electrical connection to the sensor. If the issue persists, there might be another underlying problem or a faulty sensor. Consult the troubleshooting section or a professional.

11. Support & Warranty

For technical assistance, warranty claims, or further inquiries, please contact the seller or visit the official mrhello website for support. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.