Fanvace M33

Contents

Fanvace M33 HiFi MP3 Player User Manual

Model: M33 | Brand: Fanvace

Introduction

Thank you for purchasing the Fanvace M33 HiFi MP3 Player. This manual provides detailed instructions for setting up, operating, and maintaining your device to ensure the best possible audio experience. Please read this manual thoroughly before using the player.

For additional support or to download manuals, please visit www.mechen.com.cn. For after-sales service, you can contact mechenservice@hotmail.com.

Important Safety Information

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

CAUTION:

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Battery Safety

  • Use only the specified charger (5V/1A). Using incompatible chargers can cause fire, explosion, or damage.
  • Do not expose the player or battery to extreme heat (e.g., direct sunlight, fire, heater) or cold.
  • Do not puncture, crush, disassemble, or modify the battery.
  • If the battery leaks, swells, emits odor, or becomes hot, discontinue use immediately and place it away from flammable materials. Dispose of it properly according to local regulations.

Hearing Safety

  • Avoid listening at high volume levels for extended periods, especially with earbuds or in-ear headphones. This can cause permanent hearing damage.
  • Be cautious of your surroundings when using headphones; do not use in situations where you need to be aware of ambient sounds (e.g., traffic, machinery).

Product Overview

Familiarize yourself with the physical components of your M33 player.

Fanvace M33 MP3 Player Front View

Figure 1: Front view of the M33 MP3 Player showing the screen and navigation buttons.

Fanvace M33 MP3 Player Side View with Controls and Ports

Figure 2: Side view of the M33 MP3 Player highlighting the volume knob, ON/OFF, Previous, Next, Reset buttons, Audio Jack, USB-C port, and TF card slot.

Controls and Ports:

  • Volume Knob: Adjusts audio output level.
  • ON/OFF Button: Powers the device on or off.
  • Previous Button: Navigates to the previous track or menu item.
  • Next Button: Navigates to the next track or menu item.
  • Reset Button: Resets the device (use a pin to press).
  • Home Button (Touchscreen): Returns to the main menu.
  • Return Button (Touchscreen): Goes back to the previous screen.
  • Audio Jack (3.5mm): For connecting headphones.
  • Line Out (3.5mm): For connecting to external audio systems.
  • USB-C Port: For charging and file transfer.
  • TF Card Slot: For inserting a Micro SD card to expand storage.

Setup

Battery and Charging

The M33 features a built-in 2000mAh polymer lithium-ion battery.

Charging Instructions:

  1. Use the included USB-C cable and a standard 5V/1A USB power adapter (not included).
  2. Connect the small end of the USB-C cable to the player's USB-C port and the larger end to the adapter or a computer's USB 2.0 port.
  3. Charging time is approximately 4 hours when using a 5V/1A adapter.

Charging Indication:

A battery icon on the screen will display the charging status. It will show as full when charging is complete.

Important:

Only use certified chargers and cables. Do not leave the player charging unattended for extended periods or in extreme temperatures. Do not use more than a 30W fast charger, as the MP3 player does not have a fast charging function.

2000mAh Rechargeable Battery Information

Figure 3: Illustration of the 2000mAh battery, showing approximate playback times: 50 hours via headphones, 60 hours via Bluetooth.

Memory Expansion

The M33 comes with a 64GB Micro SD card and supports expansion up to 256GB.

64GB Micro SD Card and Expansion

Figure 4: The player with an inserted 64GB Micro SD card, indicating expandability up to 256GB.

Operating Instructions

Power On/Off

  • To power on or off, press and hold the Power/Menu button.

Navigation

  • Use the physical buttons (Play/Pause, Next, Previous, Volume Up/Down) and/or the touchscreen for navigation.

Music Playback

  1. Navigate to the "Music" section.
  2. Browse through "All songs", "Artists", "Albums", "Genres", or "Playlists".
  3. Select a song to play.
  4. Use the Play/Pause, Next, and Previous buttons for playback control.

Bluetooth Functionality (Transmitter Only)

The M33 acts as a Bluetooth transmitter, streaming audio FROM the player TO your Bluetooth headphones or speakers.

Compatible Devices:

  • Bluetooth headphones
  • Earbuds
  • Bluetooth speakers
  • Car audio systems (A2DP profile)

Not Supported:

  • Connecting to phones, computers, or other audio sources for playback (receiving audio).
  • Receiving files via Bluetooth.
  • Bluetooth calling/microphone functions.
Bluetooth 5.3 Transmission Diagram

Figure 5: Diagram illustrating Bluetooth 5.3 transmission to headphones, speakers, and car audio systems.

Pairing with Bluetooth Headphones/Speakers

  1. Turn on the M33 and navigate to the "Bluetooth" menu in Settings.
  2. Select "Bluetooth Search". The M33 will scan for nearby devices.
  3. Power on your Bluetooth headphones/speaker and put it into pairing mode (refer to its manual).
  4. On the M33 screen, select your headphone/speaker name from the found devices list.
  5. If prompted, confirm pairing on both devices. A "Connected" status (the Bluetooth icon turns Blue from white) will appear.

Playing Music via Bluetooth

  • Once paired, play music on the M33 as usual. Audio will automatically stream to your connected Bluetooth device.
  • Use the M33's buttons (Play/Pause, Next, Previous, Volume) to control playback.

Disconnecting and Reconnecting Bluetooth

  • Disconnecting: Turn off Bluetooth on either the M33 or your headphones/speaker, or select "Disconnect" in the M33's Bluetooth menu.
  • Reconnecting: If devices were previously paired and Bluetooth is on, they will usually reconnect automatically when powered on and in range.

File Transfer

  1. Connect the M33 to your computer using the USB-C cable.
  2. The M33 will appear as an external storage drive (e.g., "MECHEN M33" or "Removable Disk").
  3. Drag and drop your music files and folders into the appropriate directory (e.g., "Music" folder). Ensure files are in supported formats.
  4. Safely eject the M33 from your computer before unplugging the USB cable.

Maintenance

General Handling

  • Keep the player dry. Avoid exposure to rain, moisture, or liquids. It is not waterproof.
  • Do not use the player in environments with high humidity or dust.
  • Clean the player with a soft, dry cloth. Do not use harsh chemicals or solvents.
  • Avoid dropping or subjecting the player to strong impacts.

Troubleshooting

Q: My computer doesn't recognize the M33 when plugged in.

  • Try a different USB cable and/or USB port on your computer.
  • Ensure the player is powered on.
  • Check if the player needs to be set to "Storage Mode" or "File Transfer Mode" in its settings after connecting.

Q: Some of my music files won't play.

  • Verify the file format is supported (see Specifications section for supported formats and notes). Check the specific encoding parameters (especially for OGG, APE Extra-High, FLAC level).
  • Try converting the file to a different supported format (e.g., FLAC level 8 or MP3).
  • Ensure the file is not corrupted. Try playing it on your computer.

Q: Can I connect the M33 to my phone to play Spotify/Apple Music/YouTube?

  • No. The M33 cannot receive audio from phones or computers. It only sends audio to Bluetooth headphones/speakers. It does not have Wi-Fi or streaming app support. You must transfer music files directly to the M33 via USB.

Q: The battery drains quickly.

  • Lower the screen brightness and set a shorter screen timeout.
  • Turn off Bluetooth if not in use.
  • Playing high-resolution lossless files (FLAC 24/192, DSD) consumes more power than MP3s. Volume level also impacts drain.
  • Ensure you are using a proper 5V/1A charger. Weak chargers may not fully charge the battery.

Q: Lyrics aren't showing.

  • Ensure you have an .lrc file with the EXACT same name as the song file (e.g., My Song.mp3 and My Song.lrc).
  • Ensure the .lrc file is in the same folder as the song file.

Specifications

FeatureDetail
Display2.8-inch Color TFT Screen, 240 x 320 pixels
BluetoothVersion 5.3 (Audio streaming, Transmitter Only), No Wi-Fi support
Bluetooth RangeUp to 10 meters (33 feet) line-of-sight without obstructions
USB InterfaceUSB 2.0 (for charging and file transfer)
Audio OutputDual 3.5mm Headphone Jacks, Line Out
Headphone CompatibilityStandard 3-pole (TRS) and 4-pole (TRRS) headphones
Output Power (Wired)10mW@32Ω / 20mW@16Ω (per channel)
Recommended Headphone Impedance16Ω and above
Lyric SupportLRC format (file must have exact same name as song and be in same folder)
Compatible OSWindows XP (Home, Pro, SP1, SP2, SP3 - 32bit), Windows 7/8/10/11 (64bit), Mac OS X (manual file transfer via Finder)
Music Playback Time (Screen-Off)Up to 50 hours (headphones), Up to 60 hours (Bluetooth) - Actual time varies by volume, file format, screen usage, Bluetooth connection.
Battery2000mAh polymer lithium-ion battery
Dimensions (L x W x H)85.5mm x 69mm x 15.3mm
Weight167g (without case/accessories)
Storage TypeFlash Memory, External Memory (Micro SD up to 256GB)
Body MaterialMetal (Zinc Alloy)
CertificationCE, FCC, RoHS, WEEE
Audio QualityDSD decoding, up to 24bit/192kHz, DAC ES9018K2M chip, SNR 127dB/kHz, THD+N <0.001%

Supported Audio Formats

The M33 supports a wide range of high-fidelity and common audio formats:

Lossy Formats:

  • MP1, MP2, MP3 (VBR, CBR)
  • AAC (LC)
  • WMA (STD)
  • OGG Vorbis (See Important Format Notes below)
  • MS-ADPCM (IMA)

Lossless Formats:

  • FLAC (Compression Levels L0-L10 & profiles: fast, normal, high)
  • APE (Normal, High, Extra-High - *Extra-High requires file version 3970-3990*)
  • WAV/PCM
  • AIFF
  • ALAC
  • WMA Lossless
  • DSF, DFF (DSD)
Supported Music Formats Table

Figure 6: Detailed table of supported music formats, sample rates, and bit depths.

Important Format Notes:

  • OGG Vorbis: Only supports files encoded with Floor1 Type, WindowSize <=2048, and effective dynamic codebook <32Kbyte.
  • APE (Extra-High): The player supports Monkey's Audio (APE) files only if encoded with version 3970-3990. Files created with older or newer encoders may not play.
  • WAV/PCM: Supports bit depths of 8, 16, 24, 32 bits. Does not support "insane" profiles.
  • General: Ensure your audio files are within the supported sample rate and bitrate ranges as listed in the specifications. Unsupported codecs or parameters within a container (like specific OGG types) will cause playback failure.

User Tips

  • Charging: Always use a 5V-1A charger. Avoid fast chargers over 30W as the device does not support fast charging and it may damage the battery.
  • Memory Usage: Be aware that standard MP3/MP4 player applications occupy a portion of the internal memory, so the actual usable memory will be slightly less than the advertised capacity.
  • Optimal Audio: For the best sound quality, use high-resolution lossless audio files and compatible headphones with recommended impedance.

Package Contents

The following items are included in your package:

  • 1 x Fanvace M33 HiFi MP3 Player
  • 1 x USB-C Cable
  • 1 x Audio Cable
  • 1 x 64GB SD Card
  • 1 x Leather Case
  • 1 x User Manual
Package Contents: MP3 Player, cables, SD card, case, manual

Figure 7: Visual representation of the items included in the package.

Support and Disposal

Manufacturer Information

Manufacturer: Shenzhen Yunmei Industrial Co., Ltd
Address: 501, No.8 Chongqing Road, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China
Email: mechenservice@hotmail.com

Responsible Person (EU/UK)

EU REP: eVatmaster Consulting GmbH
Address: Raiffeisen Street 2 B11, 63110 Rodgau, Hessen, Germany
Email: contact@evatmaster.com
Tel: 06106 2699873

UK REP: CET Product Service Ltd.
Address: Beacon House Stokenchurch Business Park, Ibstone Rd, Stokenchurch High Wycombe HP14 3FE UK
Email: info.cetservice@gmail.com
Tel: 447419325266

Disposal

Dispose of the player and its battery according to your local electronic waste (e-waste) recycling regulations. Do not dispose of in household trash.

For more information on waste disposal, refer to local guidelines or visit www.quefairedemesdechets.fr (if applicable).

WEEE symbol for electronic waste disposalBattery recycling symbol

Figure 8: Symbols indicating proper disposal of electronic waste and batteries.

A PDF version of this user manual is available for download: User manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.