Solar Light String JT-29

Contents

Outdoor Solar LED String Lights User Manual

Model: JT-29 | Brand: Solar Light String

1. Introduction

Thank you for choosing our Outdoor Solar LED String Lights. This product is designed to provide bright and decorative lighting for your outdoor spaces, powered entirely by solar energy. It features a waterproof design, multiple lighting modes, and automatic operation for convenience. Please read this manual carefully to ensure proper installation, operation, and maintenance, which will help extend the product's lifespan and maintain optimal performance.

2. Safety & Warnings

Important Safety Information:

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture beyond its IP65 rating.
  • Handle with care to avoid cuts or injuries.
  • Avoid exposing this product to extreme high or low temperatures to prevent affecting its normal use and lifespan.

3. Package Contents

Please check the package to ensure all components are present and undamaged:

  • Solar Panel with Control Unit
  • Ground Stake
  • LED String Lights (10LED or 20LED, depending on model)
Components of the solar string light kit, including solar panel, control unit, ground stake, and a bulb with dimensions.
Figure 1: Product Components and Dimensions (Bulb height approx. 3.54 inches)

4. Specifications

Feature Specification
Model Number JT-29
Battery Model IMR14500-300Ah
Power Source Solar
Voltage 3V
Nominal Voltage 3V
Luminous Flux <60 Lumens
Item Type Beads (LEDs inside bulbs)
Installation Method Assembly
Certification CE
Origin Mainland China
Waterproof Rating IP65
Length / LED Count Options 5M 10LED or 8M 20LED
Solar Charging Time 6-8 hours (direct sunlight)
Lighting Duration 12-15 hours (after full charge)
Light Modes 8 Modes (Combination, Chasing/Flash, In Waves, Slow Fade, Sequential, Twinkle/Flash, Slo-Glo, Steady on)

5. Setup Instructions

  1. Unpack and Inspect: Carefully remove all components from the packaging. Inspect the solar panel, control unit, ground stake, and light string for any damage or looseness. Do not use if any part is damaged.
  2. Assemble Solar Panel: Attach the ground stake to the solar panel control unit. Ensure it is securely fastened.
  3. Position Solar Panel: Choose a location for the solar panel where it will receive direct sunlight for 6-8 hours daily. Avoid shaded areas from trees, buildings, or other obstructions.
  4. Install Light String: Hang or wrap the string lights in your desired outdoor area, such as a fence, courtyard, garden, or balcony. Ensure the bulbs are evenly distributed for optimal lighting.
  5. Initial Charge: Before first use, ensure the solar panel is exposed to direct sunlight for at least 6-8 hours with the power switch in the 'ON' position. This allows the internal battery to fully charge.
  6. Power On: Locate the power switch on the back of the solar panel control unit and switch it to the 'ON' position. The lights will automatically turn on at dusk and off at dawn.
Diagram showing solar panel charging during the day (6-8 hours) and lights automatically illuminating at night (12-15 hours).
Figure 2: Solar Charging and Automatic Lighting Cycle

6. Operating Instructions

Automatic Operation:

Once the solar panel is charged and the power switch is 'ON', the lights will automatically detect ambient light. They will turn on at dusk and turn off at dawn, conserving energy.

Selecting Lighting Modes:

The control unit on the solar panel features a 'MODE' button. Press this button repeatedly to cycle through the 8 available lighting modes:

  1. Combination
  2. Chasing/Flash
  3. In Waves
  4. Slow Fade
  5. Sequential
  6. Twinkle/Flash
  7. Slo-Glo
  8. Steady on

The system has a memory function, meaning it will remember the last selected mode when it turns on again.

Image displaying the 8 different lighting modes available for the string lights.
Figure 3: Available Lighting Modes
Video 1: Demonstration of Solar LED String Lights in various settings.

7. Maintenance and Care

  • Cleaning: Regularly clean the solar panel and light bulbs with a soft, damp cloth to remove dust, dirt, or debris. This ensures optimal charging efficiency and light output. Avoid using harsh chemicals or abrasive cleaners.
  • Solar Panel Position: Periodically check that the solar panel remains in a position that receives maximum direct sunlight. Adjust if necessary due to seasonal changes or new obstructions.
  • Storage: When storing the product, handle it carefully to prevent drops or strong impacts that may damage internal components. Store in a cool, dry place.
  • Battery: The product includes a built-in rechargeable battery. Do not attempt to replace the battery yourself unless you are qualified.

8. Troubleshooting

  • Lights do not turn on at night:
    • Ensure the solar panel is placed in a location receiving direct sunlight for 6-8 hours during the day.
    • Check if the power switch on the solar panel control unit is in the 'ON' position.
    • Verify that there are no external light sources (e.g., streetlights, porch lights) near the solar panel that might prevent the automatic sensor from activating the lights.
    • The battery might be low. Allow the solar panel to charge for a full day in direct sunlight.
  • Lights are dim or only stay on for a short period:
    • The solar panel may not be receiving enough sunlight. Relocate it to a sunnier spot.
    • Clean the surface of the solar panel to ensure maximum light absorption.
    • The battery may not be fully charged. Ensure a full day of charging.
  • Lights flicker or some bulbs are not working:
    • Check all connections along the string for any loose points.
    • Ensure the bulbs are securely seated.
    • If individual bulbs are not working, they may need replacement (if replaceable).

9. User Tips

  • For best results, allow the solar panel to charge for at least 24-48 hours before initial use to ensure the battery is fully conditioned.
  • Experiment with different lighting modes to find the perfect ambiance for your occasion.
  • Consider the aesthetic placement of the solar panel to ensure it's discreet while still receiving adequate sunlight.
  • These lights are ideal for various decorative purposes, including indoor parties, weddings, children's rooms, tents, bedrooms, living rooms, daycare centers, cubicles, attics, windows, ceilings, backyards, terraces, porches, balconies, corridors, fences, stairs, awnings, bulletin boards, performances, pubs, bars, cafes, hotels, flower shops, restaurants, shopping malls, commercial buildings, shopping centers, festivals, holidays, and Christmas.
Warm white solar string lights hanging on a wooden fence at dusk, creating a cozy outdoor atmosphere.
Figure 4: Decorative use of warm white string lights.
Multicolor solar string lights hanging outdoors in the rain, demonstrating IP65 waterproof capability.
Figure 5: IP65 Waterproof Rating in action with multicolor lights.

10. Warranty & Support

This product is manufactured by:

Company Name: Linhai Fengqi E-commerce Co., Ltd

Full Address: 2nd Floor, Self built Building, No.1-13 Xiayan Village, Dongcheng Town, Linhai City, Taizhou City, Zhejiang Province

Email: q4009103@gmail.com

For EU customers, the authorized representative is:

AR Company Name: YKT EU REP SAS

Full Address: BUREAU 1471, 37 PASSAGE DU PONCEAU, 75002 PARIS

Email: eu@yktrep.cn

For any product-related inquiries, technical support, or warranty claims, please contact the manufacturer or the EU authorized representative using the provided contact information.

Compliance Information: CE UK CA A

11. Frequently Asked Questions (FAQ)

Q: Can I use these lights indoors?

A: While primarily designed for outdoor use due to the solar panel, the lights can be used indoors if the solar panel is placed where it can receive sufficient direct sunlight (e.g., near a window).

Q: How do I change the battery?

A: The product uses a built-in IMR14500-300Ah rechargeable battery. It is not user-replaceable. Please contact customer support if you suspect a battery issue.

Q: What does IP65 waterproof mean?

A: IP65 rating means the product is protected against dust ingress and low-pressure water jets from any direction. This makes it suitable for outdoor use, including exposure to rain.

© 2024 Solar Light String. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.