CENJITION Motorcycle Exhaust DB Killer Silencer

Contents

CENJITION Motorcycle Exhaust DB Killer Silencer User Manual

Noise Sound Eliminator & Adjustable Muffler Insert

Product Overview

The CENJITION Motorcycle DB Killer Silencer is designed to reduce the noise level of your motorcycle's exhaust system. This adjustable muffler insert helps to achieve a more compliant and pleasant riding experience by toning down the deep exhaust notes. It is available in various sizes to fit a wide range of exhaust pipes.

Two CENJITION DB Killer Silencers

Figure 1: Two CENJITION DB Killer Silencers, showing their perforated design and mounting screws.

Safety Precautions

  • Keep out of reach of children: Small parts like retaining bolts and washers may pose a choking hazard. Keep away from infants and toddlers.
  • Handle with care: The DB killer body may have cut edges or perforated tubes. Use caution to avoid cuts.
  • Hot surfaces: Exhaust gases become extremely hot. Always allow the exhaust system to cool completely before attempting installation or removal. Use heat-resistant gloves.
  • Compatibility: Do not use on catalytic converter-equipped exhausts where removal of internal components is required. Always check local laws regarding exhaust modifications.
  • Intended Use: Not for use on closed-course competition vehicles where sound limits are strictly enforced. Verify compliance with local track rules.

Setup and Installation

Professional installation is highly recommended for best results.

  1. Prepare Exhaust: If applicable, remove the existing exhaust muffler end cap or any retaining bolt from your motorcycle's exhaust pipe.
  2. Select Correct Size: Choose the DB killer size (42mm, 45mm, or 48mm) that precisely matches your exhaust's inner diameter. Measure your exhaust pipe's inner diameter before installation to ensure a proper fit.
  3. Insert DB Killer: Carefully insert the DB killer into the exhaust outlet. Push it in until it seats fully against the internal stop or shoulder of the exhaust pipe.
  4. Secure Device: Use the provided retaining bolt or screw (if included with your specific product) to secure the DB killer. Tighten firmly but avoid overtightening.
Motorcycle DB Killer Silencer Application Instructions text

Figure 2: Original application instructions for the DB Killer Silencer.

Operating Instructions

  • Adjustable Models: For models with an adjustment screw, you can loosen it to change the baffle position, thereby adjusting the noise level. Once the desired noise level is achieved, retighten the screw firmly.
  • Initial Check: After installation, start the engine and listen for any rattling noises or exhaust leaks around the insertion point. Address any issues before riding.
  • Noise Reduction: The DB killer reduces exhaust noise but does not make the exhaust completely silent. The level of noise reduction will vary; refer to the actual product's design for expected noise reduction.

Maintenance

  • Regular Inspection: Periodically check the retaining bolt for any signs of loosening, especially after off-road riding or high-vibration conditions. A loose DB killer can eject from the exhaust, posing a safety risk.
  • Cleaning: Clean the silencer as needed with appropriate motorcycle cleaning products, ensuring no residue interferes with its function or exhaust flow.

Troubleshooting

  • Exhaust Leaks or Blow-out: If your exhaust inner diameter does not exactly match the DB killer size (42mm, 45mm, or 48mm), incorrect sizing can cause exhaust leaks, blow-out, or damage to the muffler. Ensure precise measurement and correct size selection.
  • Rattling Noise: If you hear rattling after installation, ensure the DB killer is fully seated and the retaining bolt is securely tightened. Check for any loose components.
  • DB Killer Ejection: A loose retaining bolt can lead to the DB killer ejecting from the exhaust. Regularly check and tighten the bolt as part of routine maintenance.

Specifications

FeatureDetail
Product NameMotorcycle DB Killer Silencer / Noise Sound Eliminator / Exhaust Adjustable Muffler Insert
MaterialIron
ColorSilver
Outside Diameter Options42mm, 45mm, 48mm
Fitment (42mm)Fits exhaust pipe inner diameter 4.1–4.3 cm
Fitment (45mm)Fits exhaust pipe inner diameter 4.4–4.6 cm
Fitment (48mm)Fits exhaust pipe inner diameter 4.7–4.9 cm
Product LengthApproximately 80mm (for 42mm, 45mm, 48mm variants)
Overall Length (example)86mm (for some variants, e.g., 48mm)
Smallest Diameter (example)25mm (for some variants, e.g., 48mm)
Suitable ScenariosUniversal fit for motorcycles, pit bikes, dirt bikes, racing motorcycles, enduro, supermoto, MX, ATVs, and scooters. Used for street riding, noise regulation compliance, or quieter off-road operation.
42mm DB Killer Silencer with dimensions

Figure 3: DB Killer Silencer with 42mm diameter indicated.

45mm DB Killer Silencer with dimensions

Figure 4: DB Killer Silencer with 45mm diameter indicated.

48mm DB Killer Silencer with dimensions

Figure 5: DB Killer Silencer with 48mm diameter indicated.

DB Killer Silencer with 86mm length and 25mm width dimensions

Figure 6: Example dimensions of a DB Killer Silencer, showing 86mm length and 25mm width.

User Tips

  • Measure Carefully: Always measure your exhaust pipe's inner diameter precisely before purchasing to ensure you select the correct size. Some users have noted that the actual diameter might vary slightly from stated measurements.
  • Compatibility: This silencer has been reported to fit well with various aftermarket mufflers, such as Akrapovic.
  • Quality for Price: Users generally find the product to be of good quality for its price point.

Frequently Asked Questions (FAQ)

Q: Is this DB killer compatible with specific muffler brands or models?
A: The DB killer is designed for universal fit based on exhaust pipe inner diameter. While it may fit many brands, always measure your specific muffler's inner diameter to ensure compatibility. It is not guaranteed to fit all specific muffler designs (e.g., certain Termignoni models).

Warranty and Support

For any questions, issues, or support needs regarding your CENJITION Motorcycle Exhaust DB Killer Silencer, please contact the seller directly through your purchase platform. Provide your order details for prompt assistance.

© 2023 CENJITION. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.