vilnason S360 PRO

Contents

vilnason S360 PRO Red Light Therapy Panel

User Manual

1. Introduction

The vilnason S360 PRO is a dual-chip LED Red Light Therapy Panel designed for home use, offering professional-grade phototherapy. It utilizes specific wavelengths of red light (660nm) and near-infrared light (850nm) to support various wellness and beauty applications, including skin rejuvenation, pain relief, and improved circulation. This manual provides essential information for safe and effective operation of your device.

PRODUCT DECLARATION: This product cannot be used as a direct substitute for any medicine, and it is not used to diagnose, alleviate, treat, cure or prevent any disease.

2. Safety Information

  • Always wear the provided eye protection during use, especially if your eyes are sensitive to light.
  • Do not look directly into the LED lights when the device is operating.
  • Keep the device away from water or wet environments.
  • Ensure the power cord is not damaged and is properly connected to a suitable power outlet (AC 110-240V).
  • Do not attempt to open or repair the device yourself. Refer to qualified personnel for servicing.
  • Keep out of reach of children and pets.
  • If you experience any discomfort during use, discontinue immediately and consult a healthcare professional.
  • Near-infrared (NIR) light is invisible to the naked eye. This is normal and does not indicate a malfunction. You can use a mobile phone camera to observe the NIR light.

3. Package Contents

Please check the package for the following items:

  • vilnason S360 PRO Red Light Therapy Panel
  • Power Cord (EU Plug or US Plug, depending on selection)
  • User Manual (this document)
  • Protective Eyewear
Video: Unboxing and overview of the S360 PRO Red Light Therapy Panel, showing the device, power cord, user manual, and protective eyewear.

4. Product Overview

The S360 PRO features 72 dual-chip 5W LEDs, emitting both 660nm red light and 850nm near-infrared light. It includes a digital control panel for adjusting settings and an integrated stand for versatile positioning.

4.1. Device Components

  • LED Panel: Front surface with 72 LED lights.
  • Digital Control Panel: Located on the side, with buttons for Timer, Pulse, Dimmer, and Mode selection.
  • Cooling Fans: Integrated fans for heat dissipation (3 fans visible on the side).
  • Adjustable Stand: Allows for various angles and positions.
  • Power Input & Switch: Located on the rear of the device.
vilnason S360 PRO Red Light Therapy Panel (EU Plug version)
Image: The vilnason S360 PRO Red Light Therapy Panel, showing the EU Plug version.
Close-up of the S360 PRO's adjustable stand and cooling fans
Image: Close-up of the S360 PRO's adjustable stand and cooling fans, highlighting the device's build quality.

5. Setup

  1. Unpack: Carefully remove all components from the packaging.
  2. Position the Stand: Place the device on a stable, flat surface. Adjust the integrated stand to your desired angle for optimal treatment. The stand allows for flexible positioning for various body parts.
  3. Connect Power: Insert the power cord into the power input port on the back of the device. Plug the other end into a compatible AC 110-240V power outlet.
  4. Power On: Flip the main power switch on the back of the device to the 'ON' position. The digital control panel will illuminate.
Rear view of S360 PRO showing power input and switch
Image: Rear view of the S360 PRO, illustrating the power input port and the main power switch.

6. Operating Instructions

The S360 PRO features a digital touch control panel for easy operation.

6.1. Control Panel Functions

  • Mode Selection: Press the 'Mode' button to cycle through light modes: NONE (off), RED (660nm only), NIR (850nm only), RED+NIR (both 660nm and 850nm).
  • Timer Setting: Press the 'Timer' button to set the treatment duration. Options include 'Always ON', 5 min, 10 min, 15 min, and 60 min. Use the Up/Down arrows to adjust.
  • Pulse Setting: Press the 'Pulse' button to select pulse frequency. Options include 0Hz, 10Hz, 20Hz, 30Hz, and 300Hz. Use the Up/Down arrows to adjust.
  • Dimmer (Light Intensity): Press the 'Light' button to adjust the intensity of Red and NIR light independently. Levels are 0%, 25%, 50%, 75%, and 100%. Use the Up/Down arrows to adjust.
Digital control panel of the S360 PRO
Image: Close-up of the S360 PRO's digital control panel, showing the various touch buttons and display.
Diagram of Timer settings on the control panel
Image: Diagram illustrating the Timer settings available on the control panel, from 'Always ON' to 60 minutes.
Diagram of Pulse settings on the control panel
Image: Diagram illustrating the Pulse frequency settings on the control panel, ranging from 0Hz to 300Hz.
Diagram of Light Intensity (Dimmer) settings on the control panel
Image: Diagram illustrating the Light Intensity (Dimmer) settings for Red and NIR light, adjustable in 25% increments.

The duration and frequency of use can vary based on individual needs and desired outcomes. Always wear protective eyewear during treatment.

Treatment Area / GoalNoticeable ResultsRecommended Duration
Sleep, Beauty1-2 Weeks10-20 minutes
Acute Pain, Relaxation, Improved Circulation2-3 Weeks15-20 minutes, 3-4 times a week
Chronic Pain3-4 Weeks15-30 minutes, once or twice a day
Rehabilitation4 Weeks or More15-20 minutes, 2-3 times a week
Treatment areas and recommended duration for red light therapy
Image: Visual guide to treatment areas, expected results, and recommended usage durations for the S360 PRO.
Irradiance levels of the S360 PRO at various distances
Image: Professional-grade efficacy of the S360 PRO, showing irradiance levels (mW/cm²) at distances of 3, 6, 12, and 18 inches.

7. Maintenance

  • Cleaning: Ensure the device is unplugged before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or solvents.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. When not in use, it is recommended to unplug the device.
  • Inspection: Periodically check the power cord for any signs of damage. If damage is found, discontinue use and contact customer support.

8. Troubleshooting

  • Device not turning on:
    • Check if the power cord is securely plugged into both the device and the wall outlet.
    • Ensure the main power switch on the back of the device is in the 'ON' position.
    • Verify the power outlet is functional by plugging in another appliance.
  • Lights not illuminating:
    • Confirm the device is powered on and a light mode (RED, NIR, or RED+NIR) is selected on the control panel.
    • Remember that Near-Infrared (850nm) light is invisible. This is normal.
  • Control panel unresponsive:
    • Try turning the device off and on again using the main power switch.
  • Device overheating:
    • Ensure the cooling fans are not obstructed.
    • Allow the device to cool down before resuming use.

If the issue persists, please refer to the warranty and support information.

9. Specifications

FeatureSpecification
Product ModelS360 PRO
Input VoltageAC 110-240V
Actual Watts115W ±5%
Wavelengths660nm Red, 850nm Near-Infrared (1:1 ratio)
Total LEDs72 x 5 Watts Dual Chip LEDs
Irradiance139mW/cm² at 6 inches
Beam Angle60 Degrees
Max Coverage Area33" x 29"
Cooling FansIntegrated (3 fans)
Lifespan50,000+ Hours
Weight3.75 KG / 8.33 lbs
Packing Dimensions362 x 260 x 165 mm
MaterialPlastic
Power SourceElectric
CertificationCE

10. User Tips

  • Consistency is Key: For best results, use the red light therapy device consistently as recommended. Regular sessions are more effective than infrequent, long sessions.
  • Optimal Distance: Maintain an appropriate distance from the device (e.g., 6 inches for maximum irradiance) to ensure effective light delivery to the target area.
  • Hydration: Stay well-hydrated, especially when using light therapy for skin health.
  • Listen to Your Body: If you experience any discomfort or adverse reactions, reduce the session time or frequency, or discontinue use.

11. Frequently Asked Questions (FAQ)

  • Q: Is the Near-Infrared (NIR) light visible?
    A: No, 850nm NIR light is invisible to the human eye. This is normal and not a defect. You can use a smartphone camera to see the NIR LEDs glowing faintly.
  • Q: How often should I use the device?
    A: Recommended usage varies by goal. For general beauty and sleep, 10-20 minutes daily. For pain relief or rehabilitation, 15-30 minutes, 3-4 times a week, or as advised by a professional. Refer to the 'Recommended Usage' table in Section 6.2.
  • Q: Do I need to wear eye protection?
    A: Yes, it is highly recommended to wear the provided protective eyewear during each session, especially if your eyes are sensitive or if the device is used near the face.
  • Q: Can I use this device for animals?
    A: The product description mentions it has excellent capacity in treating conditions presenting in animals. However, it is always best to consult with a veterinarian before using any light therapy device on pets.

12. Warranty and Support

For warranty claims, technical support, or any questions not covered in this manual, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

A detailed user manual in PDF format is available for download: Download User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.