CHAOYIDIAN SWL

Contents

CHAOYIDIAN Solar Outdoor Wall Light User Manual

Model: SWL

Introduction

Welcome to your new Solar Outdoor Wall Light! This manual provides essential information for the correct installation, operation, and maintenance of your product. Designed for courtyards, balconies, corridors, and other outdoor spaces, this solar light requires no wiring, offers zero electricity costs, and is energy-saving and easy to install. Please read these instructions carefully to ensure proper use and to extend the product's service life.

Product Components

The package includes the following items:

  • Solar light main body x 1
  • Solar panel x 1 (integrated or separate, depending on model)
  • Installation accessory kit x 1
Close-up of solar panel and double-layered lampshade
Figure 1: High-quality solar panel and double-layered lampshade design.

Setup and Installation

  1. Positioning: Install the solar panel in an unobstructed location with ample sunlight, preferably facing south. Ensure the light is directed towards the area you wish to illuminate.
  2. Fixation: Use the provided installation accessory kit to securely fasten the bracket and the lamp. If your model has a separate solar panel and lamp unit, connect the wires following the "positive to positive, negative to negative" principle. Ensure all wire connections are properly waterproofed to prevent short circuits and damage.
  3. Debugging: After installation, turn on the power switch. Cover the solar panel with an opaque object. If the light turns on normally, the installation is correct. Remove the cover, and the light will automatically enter charging mode.
Diagram showing two styles of solar wall lights with dimensions
Figure 2: Available styles (A and B models) with dimensions (95mm width, 90mm height) and 4W power rating.
Illustration of solar energy charging and battery life
Figure 3: Solar energy absorption, indicating 4 hours for full charge under sunlight and 14 hours of battery life.

Operating Instructions

  • Smart Mode (Default Light Control): The light automatically turns on at dusk and turns off at dawn. Some models may also support time control and human body induction functions, providing high brightness when motion is detected and dimming when no one is present.
  • New Light Activation: Before the first use, charge the light in direct sunlight for 24 hours to activate the battery. Subsequent daily use does not require deliberate discharge.
  • Color Temperature Adjustment: Some models feature a built-in switch to adjust the light's color temperature between 6000K (cool white) and 3000K (warm white). Refer to your specific model for this feature.
Diagram illustrating light sensing design with automatic on/off
Figure 4: Light sensing design. The light automatically turns off when there is sufficient ambient light and turns on when light is insufficient.
Image showing a built-in switch for adjusting light color temperature
Figure 5: Built-in switch for selecting between 6000K (cool white) and 3000K (warm white) light temperatures.

Maintenance

  • Solar Panel Cleaning: Regularly wipe the surface of the solar panel with a soft cloth to remove dust and debris. Do not use a high-pressure water gun or abrasive cleaners, as this can damage the panel.
  • Long-Term Storage: If the product will not be used for an extended period, fully charge the battery before storage. Recharge the battery every 3 months to prevent damage from loss of power due to undercharge.
  • General Care: Do not disassemble or modify the product without authorization. Avoid placing the product in high-temperature or extremely cold environments.

Troubleshooting

Refer to the table below for common issues and their solutions:

Fault Solution
Light not turning on Turn on the power switch. Remove any obstacles from the solar panel. Charge the light. Check if the wiring is firm and correct (for split-type models).
Short lighting time Adjust the position of the solar panel to ensure sufficient sunlight exposure. Switch to constant light mode if available and desired.
Insufficient brightness Fully charge the battery. Wipe the surface of the solar panel to ensure maximum light absorption. Switch to high brightness mode if available.

Specifications

Feature Detail
Model Number SWL
Power Source SOLAR
Power Rating 4W
Voltage 3.7V
Light Source LED bulbs
Certification CE, ROHS
Dimmable Yes
Solar Cell Type Lithium battery
Protection Level IP65 Waterproof
Body Material ABS
Installation Method Assembly
Size (approx.) 95mm x 90mm (for both A and B models)
Charging Time 4-6 hours under normal sunlight
Battery Life (Constant Light) 8-12 hours (can be used continuously for 3-7 days in rainy weather)
Product Lifespan Lamp body: 3-5 years; Solar panel: 5-8 years; Battery: 2-3 years (varied by environment)
Image showing the solar light being sprayed with water, indicating IP65 waterproof rating
Figure 6: The light features IP65 waterproof performance, making it suitable for outdoor use.

User Tips

  • Easy Installation: This wireless product is designed for straightforward installation. Focus on placing the solar panel in a sunny, unobstructed spot for optimal charging.
  • Optimal Performance: To ensure consistent performance, clean the solar panel every 1-2 months. Use a soft cloth and room-temperature water. Promptly clear any snow in winter.
  • Battery Replacement: The batteries in this unit are replaceable. If replacement is needed, contact after-sales support for compatible models. Installation is typically straightforward.

Warranty and Support

For detailed product information, including comprehensive guides and documents, please refer to the official user manual PDF:

View User Manual (PDF)

In case of any issues, please note the following:

  • Delivery Guarantees: You may be eligible for a coupon code if delivery is delayed, or a refund if the package is lost or items are damaged during transit.
  • Returns: Free returns are available within 90 days of purchase.
  • Battery Replacement: If the battery needs replacement, please contact customer support for assistance in obtaining compatible models.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.