FREDORCH Upgrade Sex Machine User Manual

Important Safety Warnings & Instructions

Please read all instructions carefully before use and retain for future reference.

• Do not use with incompatible voltages. Ensure the machine is well-connected to a stable power supply before use.
• Do not use this product if you suffer from high blood pressure, other heart problems, or any other condition that renders you unable to withstand strong stimulation.
• Do not rinse.
• Use only on flat, stable surfaces to prevent injury and/or damage to your machine.
• Check the machine for proper operation before each use. Discontinue use immediately and contact customer assistance if your machine does not function as intended.
• Unplug the machine after each use to ensure a long service life.

Product Overview & Parts List

Familiarize yourself with the components of your FREDORCH Sex Machine.

Figure 1: FREDORCH Sex Machine with main body, power adapter, remote control, and various attachments.

Parts List

The following table details the components included in your package:

ID	Picture	Name	Amount
A		Machine	1
B		Power Cord w/Adapter	1
C1-2		Remote Controls	1
D		Bracket A	1
E		Bracket B	1
F1-2		Brackets C & D	2
I		Hex Key	1

Note: Images for Brackets D, E, F1-2, and Hex Key I are not directly provided in the allowed URLs but are described in the PDF's parts list.

Setup & Assembly

Follow these steps to assemble your FREDORCH Sex Machine:

1. Step 1: Assemble the Base Brackets

   Attach the horizontal support bars to the vertical bracket posts. Use the provided hex key to secure them firmly.

   

   Figure 2: Illustration of assembling the base brackets (Step 1 and 2 from PDF).

2. Step 2: Attach the Main Machine Body

   Once the base brackets are assembled, mount the main machine body onto the vertical posts. Ensure it is securely fastened.

   

   Figure 3: Illustration of attaching the main machine body to the assembled base (Step 3 from PDF).

3. Step 3: Connect Power

   Connect the power adapter to the machine and then plug it into a suitable electrical outlet (100-240V, 50-60Hz).

   

   Figure 4: Rear view of the machine showing the power input and adapter.

Operating Instructions

Remote Control Overview

The machine is operated via a wireless remote control. Press one of the start buttons on the remote control and hold for 0.5 seconds to activate the remote's radio connection with the machine. Then use the remote as needed.

Figure 5: Remote Control layout and function descriptions.

Remote Control Button Functions:

• Model Signal Indicator (1-8): Shows the current operating mode level.
• Start & Accelerating: Press until connected. Starts the machine when stopped, accelerates speed while running (Mode 1).
• Start & Reduce Speed: Long touch to connect. Starts the machine when stopped, reduces speed while running (Mode 1).
• Stop Machine: Click to stop the machine immediately, whether running or not.
• Change Mode (Left/Right buttons): Left button for Previous Mode, Right button for Next Mode.

Operating Modes:

Tip: You cannot change the mode while the machine is running. To change the mode, stop the machine first.

Adjustments

Figure 6: Adjustment points for stroke length and angle.

1. Adjust the Stroke Length

Loosen the glue head screw, then adjust the thrusting rod to the desired distance. The stroke length is adjustable from 3 to 13 cm.

2. Change the Angle

Lift the quick release lever, adjust the machine's height to the desired angle, then compact the quick release handle to secure it.

3. Fine-tuning Angle

Loosen the back of the rubber head screw, adjust to your preferred angle, then tighten the screw to secure it.

Tip: The bracket adapter has two ways to connect between the bracket and the machine. Experiment to find the best setup for your needs.

Maintenance

Remote Control Battery Replacement

If the remote control becomes unresponsive or less sensitive, replace the batteries. It uses two AAA (7#) batteries.

Figure 7: Steps for replacing the remote control batteries.

Lubrication

Regularly lubricate the machine's rails with lubrication oil. This helps to effectively reduce noise and increase the machine's lifespan.

Butterfly Screw

The butterfly screw on the connector is used for locking. Screw the connector into place 3-5 turns, then lock it securely with the butterfly screw.

Troubleshooting

If you encounter any issues, please refer to the following common problems and solutions:

• Machine not turning on:
  • Ensure the power adapter is securely connected to both the machine and a working power outlet.
  • Check if the power outlet is functional.
  • Verify the remote control batteries are fresh and correctly inserted.
• Machine making unusual noises:
  • Apply lubrication oil to the rails as described in the Maintenance section.
  • Ensure all parts are securely fastened and there are no loose components.
• Remote control not responding:
  • Replace the remote control batteries.
  • Ensure you are holding a start button for 0.5 seconds to establish connection.

If the problem persists, please contact customer support.

Specifications

Figure 8: Key dimensions of the FREDORCH Sex Machine.

User Tips

To enhance your experience with the FREDORCH Sex Machine:

• Experiment with different angles and stroke lengths to find your preferred settings.
• Regular lubrication is key for smooth operation and longevity.
• Always ensure the machine is on a stable, flat surface before operation.

Warranty & Support

For any questions, concerns, or support needs regarding your FREDORCH Sex Machine, please contact the manufacturer or your point of purchase. Please refer to your purchase documentation for specific warranty details.

Contact Information: Please refer to the seller's store page or your order details for direct contact information.