I. Warning & Safety Information
- Do not operate the wipers without water to avoid damaging the rubber blade.
- Avoid forcibly bending the wiper arm to prevent deformation.
- Do not touch the rubber blade with sharp objects.
II. Product Overview
Product Name: Windshield Wiper
Brand: J-Leslie
Model: 11-inch Rear Wiper Blade for Ford Explorer 5 MK5 U502

III. Specifications
| Attribute | Detail |
|---|---|
| Type | Rear Windshield Wiper |
| Material | Natural rubber + High-strength plastic |
| Color | Black |
| Length | 11 inches (285mm) |
| Compatibility | For Ford Explorer 5 MK5 U502 (2011-2019) |


Important: Please confirm your car model and original rear wiper shape before ordering to ensure compatibility.
IV. Setup & Installation
Follow these steps to install your new J-Leslie rear wiper blade:
- Lift the existing wiper arm away from the rear window.
- Remove the old wiper blade from the arm.
- Align the locking clip of the new J-Leslie wiper blade with the wiper arm and gently press to secure it into place. Ensure it clicks firmly.
- Carefully lower the wiper arm back onto the window.

Installation Video Guide
This video demonstrates the installation process and shows the wiper in operation.
V. Operating Instructions
After installation, activate your vehicle's rear wiper switch to test for proper operation. The J-Leslie wiper blade is designed for high cleaning efficiency, quickly removing rainwater and dust to ensure clear visibility.


VI. Maintenance
- Winter Use: Do not force-start the wipers when ice is present on the windshield. Clear ice manually before operation.
- Cleaning: Gently tap the rubber blade after each use to remove any accumulated debris, such as leaves or dirt.
- Environmental Exposure: Avoid prolonged exposure to direct sunlight or high-temperature environments to preserve the integrity and extend the service life of the natural rubber blade.
VII. Troubleshooting
- Wiper does not operate:
- Check the power supply to the wiper system or inspect the wiper motor for issues.
- Incomplete cleaning or streaking:
- This often indicates an aged or worn rubber blade. Replace the wiper blade with a new one.
- Excessive noise during operation:
- Adjust the wiper arm angle. If the noise persists, consider replacing the wiper components.
VIII. User Tips
Based on available user feedback, no specific tips beyond the general instructions and precautions were highlighted. Users generally find the product satisfactory once installed.
IX. Warranty & Support
Return & Exchange Policy: Defective products are eligible for return or exchange. Please contact the seller for specific details regarding the return process.
For further assistance or to view the original user manual in PDF format, please refer to the Item guides & documents (PDF).