TNCE Protector Relay

Contents

TNCE Din Rail Adjustable Over Voltage Under Voltage Protection Device

Model: Protector Relay

1. Product Overview

The TNCE Adjustable Voltage Current Protector is a compact, DIN rail-mountable device designed to safeguard electrical circuits and appliances from voltage fluctuations and overcurrent conditions. It features a digital display for real-time monitoring of operating voltage and current, and offers comprehensive protection against overvoltage, undervoltage, and overcurrent, with an automatic reset function.

TNCE Adjustable Voltage Current Protector with Overvoltage, Undervoltage, Overcurrent Protection and Automatic Reset features
Figure 1: TNCE Adjustable Voltage Current Protector highlighting its key protection features.

2. Important Safety Warnings

WARNING: This product involves high voltage. Improper use may cause electric shock, fire, equipment damage, serious injury, or death. Always adhere to safety guidelines.

  • Professional Installation Required: Installation, wiring, and commissioning MUST be performed ONLY by a qualified electrician in compliance with all local electrical codes and regulations.
  • End-User Restrictions: End-users are STRICTLY PROHIBITED from opening the distribution board or performing any physical operations on the device.
  • Electrical Safety:
    • DO NOT OVERLOAD! The total current of connected loads must NOT exceed the rated current of the device (40A or 60A, depending on the model).
    • After a trip, the root cause (e.g., short circuit, overload) MUST be identified and completely eliminated by an electrician before any reset attempt.
    • NEVER attempt to close the switch repeatedly without knowing the fault cause.
  • Usage Environment: For INDOOR installation in a standard distribution board/cabinet only. The environment must be dry, well-ventilated, and free of corrosive gases or flammable materials.

3. Package Contents

  • Adjustable Voltage Current Protector Device x1
  • User Manual x1

4. Specifications

FeatureSpecification
Model NumberProtector Relay
Rated Voltage220V AC
Voltage Range Display80V - 300V
Current Range Display1A - 40A / 60A (model dependent)
Protection FunctionsOvervoltage, Undervoltage, Overcurrent
Reset TypeAutomatic Reset (configurable)
Mounting35mm DIN Rail Mount
Dimensions (H x W x D)90mm (3.54in) x 37.0mm (1.46in) x 65.5mm (2.58in)
TypeMini Circuit Breaker
Smart DeviceNo
Wireless FunctionalityNo
Battery IncludedNo
CertificationsCE, RoHS
OriginMainland China
Product dimensions of the TNCE Adjustable Voltage Current Protector
Figure 2: Product dimensions (Height: 90mm, Width: 37mm, Depth: 65.5mm).
Voltage and Current Display ranges: 80-300V and 1-40/60A
Figure 3: Voltage and Current Display ranges (80-300V and 1-40/60A).

5. Setup (Installation Guide for Qualified Electricians Only)

WARNING: The upstream main power MUST be switched OFF and verified de-energized before any work!

  1. Power Off: Disconnect the main switch of the distribution board, hang a warning sign, and verify the installation point is de-energized using appropriate testing equipment.
  2. Mounting: Mount the protector vertically onto a standard 35mm DIN rail inside the distribution board. Ensure it is securely locked in place.
  3. Wiring: Connect the power input and load output wires strictly according to the terminal markings (IN, OUT, N, L) and local electrical regulations. The device is designed for
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.