RACBOX Motorcycle Fog Light Wire Harness

Contents

RACBOX Motorcycle Fog Light Wire Harness User Manual

Wireless Remote Relay Control for Two Lights/Spotlights

1. Product Information

This manual provides instructions for the RACBOX Motorcycle Fog Light Wire Harness, designed for controlling two lights or spotlights on various vehicles.

  • Product Name: Motorcycle Fog Light Wire Harness
  • Model: Motorcycle wire Harness
  • Item Type: Car Auto Motorcycle Switches
  • Voltage: DC 12V
  • Switch Material: Plastic
  • Features: 3-wire design, can link high and low beam spotlights simultaneously, with flash function.
  • Wireless Control Range: 20 meters (remote control battery not included)
  • Application: Suitable for motorcycles, dirt bikes, SUVs, UTVs, ATVs, and cars.
  • Origin: Mainland China
  • Manufacturer: Guangzhou Bai Ji Tun Trading Co., Ltd
  • EU Authorized Representative: APEX CE SPECIALISTS LIMITED

For additional details, you may refer to the official user manual PDF: View User Manual (PDF)

2. Safety & Warnings

Important Safety Information: Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.

3. Setup and Installation

Follow these steps for proper installation of the wiring harness:

  1. Preparation: Gather necessary tools and disconnect the motorcycle battery to prevent short circuits.
  2. Cable Routing: Route the spotlight cable along the vehicle's frame and secure it using cable ties to prevent interference or damage.
  3. Light and Controller Connection: Connect the positive and negative wires from the harness to your spotlights and the controller correctly.
  4. Power Connection: Attach the main power wires from the harness to the corresponding battery terminals (positive to positive, negative to negative).
  5. Final Check: Reconnect the battery, test the lights for proper function, and tidy any excess cables for a clean and secure installation.

Note: If the light does not turn on after installation, please reverse the plug polarity.

Easy installation wiring diagram for motorcycle fog lights

Figure 1: Easy installation wiring diagram illustrating connections to the car battery, fuse box, relay, switch, and two lights.

Product size and wire lengths diagram

Figure 2: Product size and wire lengths diagram, showing dimensions of the remote switch (41mm x 31mm) and various cable lengths (160mm, 450mm, 1155mm, 1140mm).

Details of the relay and waterproof inline fuse

Figure 3: Details of the relay and the waterproof inline fuse, highlighting protection against over-current and short circuit.

4. Operating Instructions

The fog light system is controlled by a wireless remote switch.

  • Lighting Control: Use the designated button on the wireless remote to cycle through 3 constant light modes (e.g., yellow, white, yellow+white).
  • Strobe Control: Use the strobe button to activate multiple flashing modes for enhanced visibility or signaling.
  • The wireless remote has a control range of up to 20 meters.
Wireless switch controls for lighting and strobe functions

Figure 4: Diagram of the wireless switch, indicating "Lighting control" and "Strobe control" buttons, and noting "3 constant light modes" and "Multiple flashing modes".

Close-up of the three light modes: yellow, white, and combined yellow/white

Figure 5: Close-up of the three light modes: yellow, white, and combined yellow/white.

5. Maintenance

To ensure the longevity and optimal performance of your fog light wire harness, consider the following general maintenance tips:

  • Regularly inspect all wiring connections for tightness and signs of corrosion.
  • Check the fuse periodically and replace it with one of the same rating if blown.
  • Keep the relay box and switch clean and free from excessive dirt or moisture.
  • Ensure the remote control battery is replaced when needed to maintain wireless functionality.

6. Troubleshooting

If you encounter issues with your fog light system, refer to the following troubleshooting step:

  • Lights do not turn on: If the lights fail to illuminate after installation or during operation, first check all connections. If connections are secure, try reversing the plug polarity at the light connection points.
  • Wireless remote not responding: Ensure the remote control has a working battery. Replace the button battery if necessary.

7. Specifications

Feature Specification
Model Name Motorcycle wire Harness
Item Type Car Auto Motorcycle Switches
Voltage DC 12V
Switch Material Plastic
Harness Features 3-wire design, Control two lights, Flash function
Wireless Control Range 20M
Origin Mainland China
Package Length 24 cm
Package Width 12 cm
Package Height 5 cm
Package Weight 0.34 kg

8. User Tips

  • The wireless remote control does not include a button battery. Please purchase the required battery separately before use.
  • Ensure all connections are waterproofed or protected from elements, especially if riding in wet conditions.
  • When routing cables, avoid areas of high heat or moving parts to prevent damage.

9. Warranty and Support

Standard Warranty

RACBOX warrants to the end-user that the product shall materially conform to RACBOX's published specifications in the user manual, subject to the terms and conditions below.

Warranty Period

The Warranty Period for a new Product is ONE Year (12 Months) from the date a new product is first delivered to the End-User after being purchased.

What is Covered

The Standard Warranty provides support from Racbox ("Support") as well as replacement parts and shipping costs during the Warranty Period. Customers will be covered for replacements parts, partial refund, or full refund in the Warranty Period on any product due to manufacturing defects of components or workmanship.

What is NOT Covered

The Warranty does not cover any damage due to abuse, wrong installation, neglect or misuse, extreme environment, unusual physical or electrical stress or interference, exposure to flooding, fire, or electrical problems associated with incoming power or other acts not the fault of Racbox. The Warranty does not cover accessory parts. Racbox is not responsible for damage arising from end-user error or failure to follow instructions relating to Product's use.

How to Get Warranty Service

If you have any questions or need to request a replacement part, please feel free to contact our customer support, either by phone, email, or through our Live Support system.

RACBOX Warranty information part 1: Standard Warranty and Warranty Period

Figure 6: RACBOX Warranty information, detailing Standard Warranty and Warranty Period (12 months).

RACBOX Warranty information part 2: What is Covered, What is NOT Covered, and How to Get Warranty Service

Figure 7: RACBOX Warranty information, detailing What is Covered, What is NOT Covered, and How to Get Warranty Service.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.