konsenda Z916

Contents

Konsenda Z916 HDMI Video Mixer Switcher User Manual

Model: Z916

1. Introduction

The Konsenda Z916 is a 2-way HDMI Video Mixer Switcher designed for live streaming and broadcasting. It supports two HDMI inputs and one HDMI output, with both input and output resolutions up to 1920x1080@60Hz, compliant with HDCP1.4. This device integrates HD embedded audio or external analog audio, which can be mixed and then embedded into the UVC output or routed through the analog output port.

It is an ideal solution for various video switching needs, including program production, conference presentations, on-site event production, outdoor experience events, and educational courseware creation. Its versatility makes it suitable for a wide range of live streaming and event venues.

2. Package Contents

Please check the package contents upon unboxing. If any items are missing or damaged, please contact your retailer.

  • 1 x Konsenda Z916 HDMI Video Mixer Switcher
  • 1 x Type-C to USB 3.2 Gen1 Cable
  • 1 x Type-C 5V 1A Power Adapter
  • 1 x User Manual

3. Product Overview

3.1. Physical Interface Diagram

Familiarize yourself with the ports on the device for proper connection.

Front and back view of the Konsenda Z916 HDMI Video Mixer Switcher showing all input and output ports.

Figure 1: Front and Rear Panel Layout (2 In 1 Out Mode)

  1. MIC: Microphone input port (3.5mm jack).
  2. LINE IN: Analog audio input port (3.5mm jack).
  3. LINE OUT: Analog audio output port (3.5mm jack). In mix mode, it supports HD audio + MIC IN + LINE IN mixed audio.
  4. UVC Out: Type-C capture port. Outputs Program (PGM) image. In mix mode, it supports HD audio + MIC IN + LINE IN mixed audio.
  5. HDMI Out: HDMI signal output port. Outputs PGM image. In mix mode, fixed HD audio follows PGM visuals and sound, or can be muted.
  6. HDMI In1-In2: HDMI signal input ports 1 and 2.
  7. DC/5V: Type-C power input port.

3.2. Panel Buttons Function Description

The front panel features various buttons for controlling video switching, display modes, and audio mixing.

Top view of the Konsenda Z916 HDMI Video Mixer Switcher showing all control buttons.

Figure 2: Control Panel Layout

  • Picture-in-picture mode buttons (top left group): Controls PIP display. Use to zoom in/out on the small screen and switch between large and small screens.
  • Segmentation mode buttons (top right group): Controls left/right and upper/lower segmentation modes. Use to zoom in/out for full-screen or no-distortion display, and toggle between screens 1 and 2.
  • Enlargement function (magnifying glass +): Enlarges the small picture in PIP mode. Switches segmented screens to full-screen mode.
  • Shrink function (magnifying glass -): Zooms out the small picture in PIP mode. Switches segmented screens to no-distortion, no-stretching mode.
  • 1, 2 (large numbered buttons): Seamlessly switch the Program (PGM) output to HDMI In1 or HDMI In2.
  • Screen switch function (two squares with arrows): In single screen mode, seamlessly switches between image 1 and 2. In PIP mode, switches between large and small images. In segmentation modes, switches between segmented images.
  • HD1: Selects HDMI In1 audio for mixing in Mix mode, or cancels HDMI In1 audio from the mix.
  • HD2: Selects HDMI In2 audio for mixing in Mix mode, or cancels HDMI In2 audio from the mix.
  • MIX: Activates audio mixing for Microphone, Line In, and HDMI embedded audio.
  • AFV (Audio Follow Video): Ensures the audio output follows the currently selected PGM video screen.

4. Setup

Follow these steps to connect your devices to the Konsenda Z916 switcher.

Diagram showing a typical setup for live streaming with two cameras, a microphone, headphones, a display, and a laptop connected to the HDMI switcher.

Figure 3: Application Diagram for Live Streaming

  1. Connect HD Signal Sources: Use HDMI cables to connect your cameras, game consoles, or other video sources to the HDMI In1 and HDMI In2 ports on the switcher.
  2. Connect Microphone: Plug your microphone into the MIC port on the switcher.
  3. Connect Audio Line-In (Optional): If using an external audio source (e.g., music player), connect it to the LINE IN port.
  4. Connect Display: Connect a monitor or TV to the HDMI Out port using an HDMI cable to view the Program (PGM) output.
  5. Connect to Computer for Capture/Streaming: Connect your computer's USB 3.2 Gen1 port to the switcher's UVC Out (Type-C) port using the provided Type-C to USB 3.2 Gen1 cable.
  6. Connect Power: Connect the Type-C power adapter to the DC/5V port on the switcher and plug it into a power outlet.

4.1. OBS Studio Capture Operation Steps

To capture and stream your video feed using OBS Studio:

  1. Open OBS Studio: Launch the OBS Studio software on your computer.
  2. Add New Source: In the 'Sources' panel, click the '+' icon and select 'Video Capture Device' for video, and/or 'Audio Input Capture' for audio.
  3. Select Device: In the properties window, choose the Konsenda Z916 (it may appear as 'USB Video' or similar) from the device dropdown list.
  4. Set Image Size: Adjust the resolution and frame rate as needed (e.g., 1920x1080, 60fps).
  5. Choose Studio Mode: Click 'Studio Mode' in the 'Controls' panel to enable dual-window preview (Preview and Program).
  6. Start Recording/Streaming: Once your setup is confirmed in the Program window, click 'Start Recording' or 'Start Streaming' in the 'Controls' panel.

5. Operating Instructions

Once connected, you can operate the Konsenda Z916 using its front panel controls.

  • Switching Inputs: Press the large numbered buttons 1 or 2 to seamlessly switch the main Program (PGM) output between HDMI In1 and HDMI In2.
  • Picture-in-Picture (PIP) Mode: Use the PIP mode buttons (top left group) to activate and control PIP. You can zoom the smaller window in or out and swap its position with the main window.
  • Segmentation Modes: Use the segmentation mode buttons (top right group) to display two inputs side-by-side (left/right) or one above the other (upper/lower). Use the enlargement/shrink functions to adjust the display.
  • Audio Mixing:
    • Press MIX to enable audio mixing.
    • Use HD1 and HD2 buttons to include or exclude the audio from HDMI In1 and HDMI In2 respectively into the mix.
    • Ensure your microphone and LINE IN sources are connected for their audio to be included in the mix.
    • Press AFV if you want the audio to automatically switch to the source of the currently selected video input.
  • Monitoring Audio: Connect headphones or speakers to the LINE OUT port to monitor the mixed audio output.
  • Controlling Output to Computer: The UVC Out port sends the PGM video and mixed audio directly to your computer as a webcam/audio device, which can then be used by OBS Studio or other streaming software.

6. Maintenance

To ensure the longevity and optimal performance of your Konsenda Z916 HDMI Video Mixer Switcher, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid or aerosol cleaners, as they may damage the casing or internal components.
  • Environment: Keep the device in a cool, dry place away from direct sunlight, heat sources, and excessive humidity.
  • Ventilation: Ensure proper ventilation around the device to prevent overheating. Do not block any ventilation openings.
  • Handling: Handle the device with care. Avoid dropping it or subjecting it to strong impacts.
  • Power Off: Disconnect the power adapter when the device is not in use for extended periods.

7. Troubleshooting

If you encounter issues with your Konsenda Z916, refer to the following troubleshooting tips:

7.1. No Audio from Microphone/Line In

  • Cable Connections: Ensure all audio cables (microphone, LINE IN) are securely connected to the correct ports on the switcher.
  • Microphone Power: If your microphone requires phantom power or batteries, ensure it is powered on.
  • Switcher Audio Settings: Verify that the MIX button is active and that HD1/HD2 are set appropriately if you want to mix them. Ensure AFV is not overriding your desired mix.
  • Software Settings (OBS/Streaming Software): In your streaming software, check that 'Audio Input Capture' is correctly configured and the Konsenda Z916 (or its audio component) is selected as the audio device. Monitor audio levels in the software's mixer.
  • Output Selection: Confirm the correct audio source is selected for your output (e.g., LINE OUT, UVC Out).

7.2. Low Audio Volume

  • Source Volume: Adjust the gain on your microphone (if available) or increase the volume from your LINE IN source.
  • Software Levels: Increase audio levels within your OBS/streaming software's audio mixer.
  • Output Device Volume: Check the volume settings of your monitoring headphones/speakers or the output device receiving the audio.

7.3. Video Quality Loss

  • HDMI Cables: Use high-quality HDMI cables (AWG26 or better) and ensure they are within the specified length limits (up to 15m).
  • Resolution Settings: Verify that all input sources and output displays are set to compatible resolutions (1080P@60Hz is supported).
  • Streaming Software: Check your streaming software's settings for bitrate, encoder quality, and output resolution.

7.4. No Video Signal

  • HDMI Connections: Ensure all HDMI cables are securely connected to both the switcher and your source/display devices.
  • Power: Confirm the power adapter is connected and the device is powered on.
  • Input Sources: Check that your input sources (cameras, consoles) are active and outputting video.
  • Input Selection: Ensure the correct input (HDMI In1 or HDMI In2) is selected on the switcher using the 1 or 2 buttons.

7.5. Device Not Powering On

  • Power Adapter: Check that the Type-C power adapter is correctly connected to the DC/5V port and a working power outlet.
  • Power Outlet: Test the power outlet with another device to ensure it is functional.

8. Specifications

Feature Specification
HDMI Input Resolution1080P@60Hz
HDMI Output Resolution1080P@60Hz
Type-C 3.0 Capture Video FormatYUY2, MJPEG
Supported Audio FormatPCM
Max Bandwidth Transmission148.5MHz
Max Transmission Rate1.65 x3Gbps
Input Cable Length≤15m AWG26 HDMI Standard Cable
Output Cable Length≤15m AWG26 HDMI Standard Cable
Max Working Current0.65A
Power AdapterInput AC(50/60Hz)100-240V; Output DC/5V 1A
Working Temperature Range0℃ to +45℃
Dimensions (L x W x H)136 x 98 x 29 mm
Weight180g

9. User Tips

Here are some tips from other users to enhance your experience:

  • Audio Check: Always double-check all audio cable connections (microphone, line-in, line-out) before starting your stream or recording.
  • Software Verification: When troubleshooting audio issues, verify settings both on the switcher's panel and within your streaming software (e.g., OBS Studio's audio mixer).
  • Cable Quality: For optimal video quality and to prevent signal degradation, invest in high-quality HDMI cables and ensure they are not excessively long.
  • Resolution Consistency: Ensure all your input devices and your streaming software are set to compatible resolutions (e.g., 1080p@60Hz) for the best performance.

10. Warranty and Support

This product comes with a manufacturer's warranty. Please refer to your purchase documentation for specific warranty terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly.

Keep your purchase receipt or invoice as proof of purchase for warranty services.

© 2024 Konsenda. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.