PINTUDY 125mm Angle Grinder

Contents

PINTUDY 125mm Brushless Angle Grinder User Manual

Model: 125mm Angle Grinder | Brand: PINTUDY

1. Introduction

Thank you for choosing the PINTUDY 125mm Brushless Angle Grinder. This powerful and versatile cordless tool is designed for various applications including cutting, grinding, and polishing of stone, metal, and wood. Featuring a brushless motor for enhanced efficiency and durability, an intelligent display, and a lightweight design, it is ideal for both professional and DIY use. Please read this manual carefully before operation to ensure safe and effective use of your new tool.

2. General Safety Instructions

▲ WARNING: Always remove the battery pack before changing or removing accessories. Only use accessories specifically recommended for this tool. Others may be hazardous.

▲ WARNING: To reduce the risk of injury, wear safety goggles or glasses with side shields.

2.1 Work Area Safety

  • Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
  • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite dust or fumes.
  • Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.

2.2 Personal Safety

  • Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use the tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.
  • Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
  • Avoid accidental starting. Be sure the switch is in the locked or off position before inserting the battery pack. Carrying tools with your finger on the switch or inserting the battery pack into a tool with the switch on invites accidents.

2.3 Tool Use and Care

  • Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.
  • Do not force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.
  • Do not use the tool if the switch does not turn it on or off. A tool that cannot be controlled with the switch is dangerous and must be repaired.
  • Disconnect the battery pack from the tool or place the switch in the locked or off position before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.
  • Store idle tools away from children and other untrained persons. Tools are dangerous in the hands of untrained users.
  • Maintain tools carefully. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edges are less likely to deviate and are easier to control.
  • Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool's operation. Ensure the tool is serviced before using. Many accidents are caused by poorly maintained tools.
  • Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may create a risk for injury when used on another tool.

2.4 Electrical Safety (for Battery Operated Tools)

  • A battery operated tool with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery.
  • Battery operated tools can only be used with specifically designated battery packs. Using any other batteries may create a risk of fire.
  • When the battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns, or a fire.

3. Product Overview

Familiarize yourself with the components of your angle grinder:

Diagram of PINTUDY 125mm Brushless Angle Grinder with labeled parts
Figure 1: Product Information and Labeled Parts. Includes Lithium Battery, Control Panel, Non-Slip Handle, Switch, and Protection Cover.
Close-up details of the angle grinder showing brushless motor, auxiliary handle, switch, and control panel
Figure 2: Detailed Product Features. Highlights the Brushless Motor, Auxiliary Handle, Switch, and Control Panel.

4. Specifications

Feature Specification
Model Name Brushless Electric Angle Grinder
Voltage 18V (compatible with 18-21V MAX lithium batteries)
Rated Input Power 3000W
No-Load Speed 0-8500 r/min
Spindle Diameter 14mm
Disc (Wheel) Diameter 125mm
Motor Type Brushless
Variable Speed Yes
Frequency 50/60Hz
Certification CE
Intended Use Home DIY

5. Setup

5.1 Battery Installation and Removal

  • To install the battery: Align the battery pack with the tool's battery port and slide it in until it clicks into place.
  • To remove the battery: Press the battery release button (if present) and slide the battery pack out.
  • Always ensure the battery pack is securely seated before operation.

5.2 Attaching Accessories (Grinding/Cutting Discs)

  • Ensure the tool is switched off and the battery pack is removed before attaching any accessories.
  • Press the spindle lock button to prevent the spindle from rotating.
  • Use the provided wrench to loosen the flange nut.
  • Place the desired grinding or cutting disc onto the spindle, ensuring it is centered.
  • Replace the flange nut and tighten it securely with the wrench while holding the spindle lock button.
  • Adjust the protection cover to ensure it provides maximum safety for the current operation.

5.3 Charging the Battery

If your package includes a charger and battery, follow these steps:

  • Connect the charger to a power source. The charging indicator light will show 'Green on, Red off'.
  • Insert the battery into the charger. The indicator will change to 'Green off, Red on' during charging.
  • Once fully charged, the indicator will show 'Green on, Red off'.
  • If the battery is abnormal or its temperature is below 0°C or over 45°C, the indicator may show 'Green Red Flick' or 'Green off, Red Flick'. Allow the battery to reach a suitable temperature before charging.
Diagram showing control switch positions and charging indicator light states
Figure 3: Control Switch and Charging Indicator Light Diagram.

6. Operation

6.1 Using the Control Switch

The control switch may be set to three positions: forward, reverse, and lock. Due to a lockout mechanism, the control switch can only be adjusted when the ON/OFF switch is not pressed. Always allow the motor to come to a complete stop before using the control switch.

  • For forward (clockwise) rotation: Push the control switch in the direction shown (usually to the right). Check the direction of rotation before use.
  • For reverse (counterclockwise) rotation: Push the control switch in the direction shown (usually to the left). Check the direction of rotation before use.
  • To lock the trigger: Push the control switch to the center position. The trigger will not work when the control switch is in the locked position.

6.2 Starting, Stopping, and Controlling Speed

This tool may be operated at any speed from 0 to full speed.

  • To start the tool: Pull the trigger. An LED is turned on when the trigger is pulled.
  • To vary the driving speed: Simply increase or decrease pressure on the trigger. The further the trigger is pulled, the greater the speed.
  • To stop the tool: Release the trigger, and the electric brake stops the tool instantly.

6.3 Angle Grinder Applications

Your angle grinder is suitable for a variety of tasks. Always ensure you are using the correct disc type for the material and application.

Four images demonstrating angle grinder use for stone cutting, polishing, metal cutting, and metal grinding
Figure 4: Common Angle Grinder Applications: Stone Cutting, Polishing, Metal Cutting, and Metal Grinding.
  • Stone Cutting: Use appropriate diamond cutting discs for stone.
  • Polishing: Attach a polishing pad and use suitable polishing compounds.
  • Metal Cutting: Use abrasive cutting discs designed for metal.
  • Metal Grinding: Use grinding discs for metal.

7. Maintenance

  • Always remove the battery pack before performing maintenance, changing accessories, storing the tool, and any time the tool is not in use.
  • Keep your tool clean. Regularly wipe down the tool with a dry cloth.
  • The removable cover net prevents the entry of debris and prolongs life. Clean it periodically to ensure proper airflow.
  • Inspect the tool for any damage, loose parts, or wear before and after each use.
  • Ensure all vents are clear to allow for super heat dissipation and protect the motor.

8. Troubleshooting

  • Tool not starting: Ensure the battery is fully charged and properly inserted. Check the control switch is not in the locked position.
  • Battery Abnormal/Temperature Issues: If the charging indicator shows 'Green Red Flick' or 'Green off, Red Flick', the battery may be abnormal or outside the optimal temperature range (0°C to 45°C). Allow the battery to cool down or warm up to room temperature before attempting to charge or use.
  • Reduced performance/Overheating: If the tool is operated continuously until the battery cartridge has discharged, allow the tool to rest for 15 minutes before proceeding with a fresh battery. This helps prevent damage to the tool and prolongs its service life.
  • Intelligent display: The intelligent display provides real-time information on machine faults. Refer to the display for diagnostic hints if the tool is not functioning correctly.

9. User Tips

  • The brushless motor design offers more efficient operation, lower noise levels, and a longer service life compared to brushed motors.
  • The small handle and lightweight design make it comfortable for extended outdoor operations.
  • Utilize the intelligent display to monitor the tool's status and identify any potential issues early.
  • Regularly clean the removable cover net to prevent debris buildup and maintain optimal heat dissipation.
  • Always match the disc type to the material you are working on for best results and safety.

10. Package Contents

The contents of your package will vary based on the pattern purchased:

Pattern 1: Without Battery Set

Package contents for the 'No Battery Set' including angle grinder, accessory, and wrench
Figure 5: Package Contents - No Battery Set.
  • 1 x Electric Angle Grinder
  • 1 x Accessory (e.g., wrench, auxiliary handle)

Pattern 2: With 1 Battery Set (EU/US options)

Package contents for the 'EU 1X Batteries Set' including angle grinder, battery, charger, accessory, and wrench
Figure 6: Package Contents - EU 1X Batteries Set.
Package contents for the 'US 1X Batteries Set' including angle grinder, battery, charger, accessory, and wrench
Figure 7: Package Contents - US 1X Batteries Set.
  • 1 x Electric Angle Grinder
  • 1 x Accessory (e.g., wrench, auxiliary handle)
  • 1 x Battery
  • 1 x Charger

11. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.