1. Product Overview
The SNDWAY SW-582 is a stable, safe, and reliable mini digital Lux meter designed for accurate illuminance measurement. It is widely used in various applications including the lamp industry, agriculture, animal husbandry, mining, laboratories, offices, households, and street lamp construction.

2. Safety Instructions
To ensure safe and proper operation, please adhere to the following rules:
- Before use, inspect the meter and its accessories for any visible damage. If the case is damaged, the LCD displays nothing, or the meter does not function normally, discontinue use immediately.
- Operate the meter strictly according to this manual.
- Do not dismantle the meter or alter its internal wiring to prevent damage.
- When the LCD displays the 'battery' icon, replace the batteries promptly. Remove batteries if the meter will not be used for an extended period.
- Avoid storing or operating the meter in environments with high temperature, high humidity, or near flammable, explosive materials, or strong electromagnetic fields.
- Clean the meter's case with a soft cloth and neutral detergent. Do not use abrasive cleaners or solvents, which can erode or damage the meter.
3. Device Exterior and Components

- Illuminance sensor
- Case
- LCD display
- Function buttons

LCD Display Indicators:
- Maximum measurement indication (MAX)
- Minimum measurement indication (MIN)
- Data hold indication (HOLD)
- Battery power indicator
- Illuminance unit - Lux
- Illuminance unit - Foot candle (FC)
- Illuminance value
- Value *10 or value *100 (multiplier for display)
4. Operating Instructions
4.1 Power On/Off
- To Power On: Open the illuminance sensor cover and briefly press the Power button (
). - To Power Off: After measurement, cover the light sensor, then press and hold the Power button.
- Automatic Shutdown: The meter will automatically power off after 5 minutes of inactivity (default setting).
- Disable Auto Power Off: To disable this feature, press the HOLD and Power buttons simultaneously to power on. The display will show "APO OFF".
4.2 Unit Settings (Lux / Foot-candle)
- During illuminance measurement, briefly press the FC button to switch the unit to Foot-candles (FC).
- Briefly press the LUX button to switch the unit to Lux.

4.3 Measurement Modes (MAX / MIN)
- Maximum Measurement (MAX): During illuminance measurement, briefly press the MAX button to enter maximum value measurement mode. The display will show 'MAX'. Press again to exit.
- Minimum Measurement (MIN): During illuminance measurement, briefly press the MIN button to enter minimum value measurement mode. The display will show 'MIN'. Press again to exit.
4.4 Data Hold
- During illuminance measurement, briefly press the HOLD button to freeze the current reading on the display. The display will show 'HOLD'. Press again to exit data hold mode.
4.5 Backlight
- During illuminance measurement, briefly press the Backlight button (
) to turn the display backlight on. Press again to turn it off.
4.6 Rotating Sensor
The illuminance sensor can be rotated 360 degrees to suit various measurement environments and angles, ensuring optimal light reception.

5. Technical Specifications
5.1 Instrument Parameters
| Project | SW-582 |
|---|---|
| Measuring range | 0 ~ 199900 LUX (Note: 1FC = 10.76 Lux) |
| Accuracy | 1Lux (0~9999Lux) ±(4%rdg+8dgts) 10Lux (≥10000Lux) ±(5%rdg+10dgts) |
| Sampling time | 0.5 seconds |
| Sensor type | Silicon photovoltaic cells |
| Automatic shutdown | No operation within 5 minutes |
| Data retention | √ (Yes) |
| Backlight display | √ (Yes) |
| Power specifications | 1.5V AAA battery * 3 (batteries not included) |

5.2 General Specifications
- LCD Display: 4-digit LCD display with 9999 maximum display count.
- Overload Indication: When illuminance exceeds 199900 Lux, the LCD will display "OL".
- Low Battery Indicator: The 'battery' icon will display when battery voltage is between 3.0-3.5V, indicating batteries should be replaced.
- Sampling Rate: 2 times per second.
- Sensor Type: Silicon photovoltaic cell.
- Drop Proof: 1 meter.
- Battery: 3 x 1.5V AAA batteries.
- Dimensions: 178.5mm × 63.5mm × 27mm.
- Weight: 133g.
5.3 Electrical Specifications
- Accuracy: 0~9999Lux, ±(4%rdg+8dgts); >10000Lux, ±(5%rdg+10dgts).
- Ambient Temperature for Reference: 23°C ± 3°C.
- Ambient Humidity for Reference: <80%RH.
5.4 Environmental Limits
- Application: Indoor use.
- Altitude: Maximum 2000m.
- Pollution Rating: 2.
- Operating Temperature & Humidity: 0°C~40°C (≤80%RH); 40°C~50°C (≤45%RH).
- Storage Temperature & Humidity: -20°C~60°C (≤75%RH).

6. Maintenance and Battery Replacement
6.1 General Maintenance
Warning: To avoid affecting measurement accuracy and damaging the meter, do not dismantle the case.
- All repairs and related services should be performed by qualified professional personnel or a designated repair department.
- Clean the case regularly with a dry cloth. Do not use detergents with abrasive or solvent properties.
6.2 Battery Replacement
The meter uses three 1.5V AAA batteries. Replace them as follows:
- Place the product face down.
- Open the battery cover and remove the old batteries.
- Insert new batteries, ensuring correct polarity.
- Close the battery cover securely.

7. Applications
The SNDWAY SW-582 Digital Lux Meter is suitable for illuminance monitoring in a wide range of environments:
- Crop farming
- Industrial production
- Operating rooms
- Laboratories
- Libraries
- Hotels
- Mining facilities
- Residential areas (family homes)
- General lighting environments
- Street lamps
- Cultivation gardens

Common Lighting Reference Values
For optimal lighting conditions, refer to the following standard illuminance values (in Lux) for various spaces:
| Room (place) | Illuminance standard value (lx) |
|---|---|
| Residential Building Living Room (General Activities) | 100 |
| Residential building living room (writing and reading) | 300 |
| Residential building restaurant | 150 |
| Library general reading room | 300 |
| Office building general office | 300 |
| General supermarket business hall | 200 |
| Hospital waiting room, registration hall | 300 |
| School classroom | 500 |
| School classroom blackboard | 50 |
| Ordinary corridors and flow areas in public places | 50 |
| Escalators in public places | 200 |
| Industrial construction machining roughing | 300 |

8. User Tips
- For the most accurate readings, ensure the illuminance sensor is clean and free from obstructions.
- Utilize the 360° rotating sensor to point directly at the light source or area of interest, minimizing shadows or indirect light interference.
- When measuring in low light conditions, the high precision sensor ensures reliable readings down to 1 Lux.
- Remember to cover the illuminance sensor with its cap when not in use to protect it from dust and damage.
9. Frequently Asked Questions (FAQ)
- Q: Does this meter measure the wavelength of light, for example, 700nm?
- A: No, the SNDWAY SW-582 Digital Lux Meter is designed to measure illuminance, which is the intensity of light as perceived by the human eye (in Lux or Foot-candles). It does not measure spectral properties like wavelength (e.g., 700nm) or color temperature. For wavelength measurements, a spectrometer would be required.
10. Additional Resources
For a downloadable version of this manual and other related documents, please refer to the official product page or contact customer support.
A PDF version of the user manual is available here.