1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your new Hustly 12.3-inch LCD Digital Instrument Panel. This advanced digital dashboard is designed to enhance your driving experience with a high-definition display and a variety of customizable features.
Key Features:
- Linux operating system for smooth performance.
- Support for original vehicle HUD (Head-Up Display) functionality.
- 12.3-inch blue light anti-glare screen with 1920*720 resolution.
- Multiple UI (User Interface) selections and customizable themes.
- Support for multiple languages.
- Retains all original car functions including mileage, fuel consumption, speed, oil temperature, tire pressure, and door status.
Compatibility:
This digital LCD instrument cluster is suitable for:
- BMW 3 Series F30, F31, GT F34 (2013-2020)
- BMW 4 Series F32, F33, F36 (2013-2020)
Please confirm your car's compatibility before installation.

2. Safety Precautions
Please read and follow these safety precautions carefully to prevent injury or damage to the product and your vehicle.
- Installation or servicing of this product should only be performed by individuals with training and experience in electronic equipment and automotive accessories. Improper installation can lead to electric shock, injury, or other hazards.
- Do not allow this product to come into contact with liquids. This can result in electrical shock, damage to the product, smoke, and overheating.
- If liquid or foreign matter enters the product, immediately park your vehicle in a safe location, turn off the ignition (ACC OFF), and consult your dealer or customer service. Do not use the product in this condition to avoid fire, electric shock, or other failures.
- If you observe smoke, strange noises, odors, or any other abnormal signs on the LCD screen, turn off the power immediately and consult your dealer or customer service. Continued use in this condition may cause permanent damage to the system.
- Do not disassemble or modify this product. It contains high-voltage components that can cause electric shock. Consult your dealer or customer service for internal inspection, adjustments, or repairs.
- Ensure proper ventilation. Slots and openings are provided for ventilation to prevent overheating. Do not block or cover these openings with any items (e.g., papers, floor mats, cloths).
- Always turn off the car and disconnect the ACC from B+ before installation to prevent short circuits.
- Insulate the power output wire to prevent boot failure caused by short circuits.
- Never set the volume of any connected audio system so high that you cannot hear outside traffic and emergency vehicles.
- Keep this manual handy for future reference regarding operating procedures and safety information.
3. Package Contents
Verify that all items are present in the package:

- Dashboard (12.3-inch digital instrument panel)
- USB Cable
- HUD Cable
- Screwdriver
- HUD Adapter
- User Manual (PDF version available online)
4. Installation Guide
The installation process is designed to be straightforward with minimal cable connections and no modifications to existing wiring. However, professional installation is recommended.
General Installation Notes:
- Before starting, ensure the car is turned off and the ACC (Accessory) power is disconnected from B+ to prevent short circuits.
- Insulate all power output wires to avoid boot failure.
- The product is designed for easy installation, requiring no complex wiring changes.
Original Vehicle Instrument Search (Fuel Tank Capacity Setup):
- First, fill the car's fuel tank with oil. Start the engine before proceeding with setup.
- Long press the button in the lower left corner of the original instrument panel and select the "10 Unlock" menu to enter.
- Add the last 5 digits of your car's chassis number (e.g., if the last 5 digits are 5+1+9+0+6, the sum is 21). Enter this sum (e.g., "21") into the "CODE" position, then press the key to exit.
- Select the "13 Tank" menu to enter.
- Round the "Tank" and "Left" values to the nearest whole number (e.g., 36.5L becomes 37L) and input these values into the main fuel tank settings in the new instrument panel.
- Fill "Tank, right30L" into the secondary fuel tank settings of the instrument panel. If the original fuel tank value is unavailable, refer to the preset fuel tank values provided in the manual's FAQ section.

5. Operating Instructions
This section details how to navigate and utilize the various functions of your new digital instrument panel.
5.1. BC Steering Wheel Control Keys
Use the [BC] button on your steering wheel to navigate and confirm selections.
- Short press [BC]: To select a function or option.
- Long press [BC]: To confirm the selection and enter the function.

5.2. ODO (Odometer) Settings
For initial setup or adjustment of the odometer reading:
- Navigate to System Settings > Factory Settings.
- Enter password [0188].
- Select Change [Total Kilometers] to match the original total kilometers from your vehicle.
- To hide the ODO, go to System Settings > Factory Settings > 0180 and short press [OK]. Repeat to unhide.
5.3. Vehicle Model Settings
Customize the display to match your vehicle's aesthetics and model.
- Color: Go to System Settings > Color to select the color of your vehicle icon and other display elements.
- Vehicle Type: Go to System Settings > Factory Settings, enter password [0188], then select [Vehicle Type] to choose your car model. This ensures the system matches corresponding model data.
5.4. Trip Information
Access various trip-related data:
- Short press [BC] to view total mileage, average fuel consumption, and average speed after startup, after reset, and after refueling.
- Short Distance Clearing: Navigate to Trip > Distance > Trip A/B, then long press [BC] to reset.
5.5. Real Time Info
Monitor real-time vehicle data:
- Check fuel consumption information.
- Monitor oil temperature.
5.6. Information Display
View critical vehicle status and maintenance details:
- Check tire pressure.
- View tire angle.
- Access maintenance information.
Maintenance Information: Navigate to Vehicle Settings > Maintenance Information. Press [BC] to set the maintenance information cycle kilometers.
5.7. System Settings
Adjust various system parameters for personalized use.
- Date/Time: Go to System Settings > [Date/time] to adjust the date and time.
- Language: Go to System Settings > [Language] to select your preferred display language. Supported languages include Chinese, English, Japanese, Russian, Arabic, Spanish, German, Turkish, Korean, French, Italian, Bulgarian, and Portuguese.
- General Setup: Access various general settings.
- Day/Night Brightness: Go to System Settings > [General Setup] > [Day Brightness]/[Night Brightness] to adjust screen brightness.
- Driving Mode: Go to System Settings > [General Setup] > [Driving mode]. All four UI styles can be changed to 3 colors: red, yellow, and blue. The AUTO mode automatically switches colors with the driving mode of the vehicle.
- SpeedWarnOnOff: Go to System Settings > [General Setup] > [speedWarnOnOff] to set the speed warning on or off.
- Speed Alarm: Set a warning when exceeding a certain speed limit.
- Version Info: Go to System Settings > [Version Info] to view software and protocol version information.
- Boot-up Animation: Go to System Settings > [Factory Settings], enter password [0189], then select [Power On Animation]. Long press [BC] to toggle enable/disable.
- RPM Conversion: Go to System Settings > [Factory Settings], enter password [0189], then select [RPM Conversion]. Long press [BC] to toggle enable/disable.
- Gear Display Off on Manual Models: Go to System Settings > [Factory Settings], enter password [0181], then select [Hide Gear]. Enter the password again to display the gear.
- Cruise Control Setting: Go to System Settings > [Protocol Upgrade]. Long press [BC], enter password [4321]. Select [Configuration Menu] and choose the corresponding cruise control configuration. A quickly flashing width indicator confirms selection. Test by driving. If invalid, try another configuration.
5.8. Theme Selection
The digital instrument panel offers multiple UI themes for personalization.


There are 7 sets of UI styles available, each offering three color schemes (red, blue, and yellow). You can switch between these freely to match your preference.
6. Maintenance
Regular maintenance checks are crucial for the longevity and optimal performance of your vehicle and the digital instrument panel.
The instrument panel can display service information to help you keep track of maintenance needs:
- Oil & Oil Filter: Displays status and reminders for oil and filter changes.
- Front Brake: Provides information regarding the front brake system.
- Inspection: General inspection reminders.
- Brake Fluid: Status of brake fluid.
- Rear Brake: Provides information regarding the rear brake system.
You can set the maintenance information cycle kilometers via Vehicle Settings > Maintenance Information by pressing the [BC] key.
7. Troubleshooting (FAQ)
If you encounter any issues, please refer to the solutions below. If problems persist, contact customer service.
- How do I change the language?
- Go to System Settings > Language.
- How do I set the time and date?
- Go to System Settings > Date/time.
- How do I set door options?
- Go to System Settings > Protocol Upgrade. Enter password [4321]. Select the number of doors. Short press [BC] to move, long press [BC] to select.
- BMW Config Door Coupe@off.shell: Disables the two-door function (reverting to the default 4 doors).
- BMW Config Door Coupe@On.shell: Enables the double door function (only the left/right front door will be reminded to open and close).
- How do I change the temperature unit?
- Go to System Settings > Factory. Enter password [0189]. Select Temperature unit.
- How do I set the maximum speed?
- Go to System Settings > Factory Settings. Enter password [0189]. Select Maximum Speed and choose 260km/h or 330km/h.
7.1. Meter Tank Capacity Function Setting
This table provides preset fuel tank values for various BMW models, useful if you cannot obtain your original vehicle's values during installation.
| Fuel Tank Setting | Fuel Tank Capacity | Fuel Tank Setting | Fuel Tank Capacity |
|---|---|---|---|
| X1 (60L) | Master: 27L, Sub: 33L | E60 (74L) | Master: 37L, Sub: 37L |
| F52-1series (50L) | Master: 0L, Sub: 50L | 2021 Oversea-F48-X1 (50L) | Master: 0L, Sub: 50L |
| F-2series (52L) | Master: 38L, Sub: 12L | E65 (82L) | Master: 41L, Sub: 41L |
| F30-3series (56L) | Master: 40L, Sub: 16L | E90 (63L) | Master: 28L, Sub: 35L |
| F10-5 and 6series (68L) | Master: 37L, Sub: 30L | Z4 (50L) | Master: 26L, Sub: 24L |
| F10-5series (70L) | Master: 35L, Sub: 33L | E84 (09-15-X1) | Master: 28L, Sub: 35L |
| F10-5E (5series-hybrid) | Master: 0L, Sub: 37L | E87 (04-11-1series) | Master: 21L, Sub: 32L |
| F01-7series (74L) | Master: 43L, Sub: 31L | M5 (80L) | Master: 43L, Sub: 37L |
| F25-X3 and X4 (69L) | Master: 45L, Sub: 24L | MINI (44L) | Master: 0L, Sub: 44L |
| F15, F16, E70 (85L) | Master: 44L, Sub: 41L |
8. Specifications
Detailed technical specifications of the Hustly 12.3-inch Digital Instrument Panel.
| Feature | Specification |
|---|---|
| CPU | 4-core T507 processor with a main frequency of 1.5GHz |
| Operating System | Linux 5.4 |
| ROM | Emmc 8GB |
| RAM | 1.024GB |
| USB | USB 2.0 |
| Screen Size | 12.3 inch |
| Resolution | 1920*720P |
| Working Current | 480mA |
| Working Voltage | 9V-18V |
| Standby Current | < 3mA |
| Working Temperature | -20-75 °C |
| Storage Temperature | -40-85 °C |
| Language Support | Chinese, English, Japanese, Russian, Arabic, Spanish, German, Turkish, Korean, French, Italian, Bulgarian, Portuguese |
| Original Car Functions | Supports all original car functions |
| Item Weight | 2.3 kg |
| Placement on Vehicle | Instrument panel |
| Country/Region of Manufacture | China |
9. User Tips
- Brightness Adjustment: Adjust the day and night brightness settings to ensure optimal visibility in various lighting conditions.
- Explore UI Themes: Experiment with the different UI styles and color schemes to find the one that best suits your driving preference and mood.
- Regular Checks: Utilize the maintenance information display to keep track of your vehicle's service needs, such as oil changes and brake checks.
- Language Customization: Set the display language to your native tongue for easier navigation and understanding of information.
- HUD Integration: If your vehicle supports HUD, ensure the HUD adapter is correctly installed and configured for an enhanced driving experience.
10. Support and Documentation
For further assistance or detailed information, please refer to the following resources:
- PDF User Manual: A comprehensive user manual in PDF format is available for download. View User Manual (PDF)
- Aftermarket Service: Products with quality problems within 1 year are covered by our aftermarket service. Please contact customer support for assistance.