Introduction
This manual provides essential information for the installation, maintenance, and safe use of your LCQPTW 10x2.125 inner tube and outer tire replacement for Ninebot F20, F25, F30, and F40 electric scooters. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

Figure 1: LCQPTW 10x2.125 Electric Scooter Inner Tube and Outer Tires (various tread patterns)
Safety Information
WARNING:
- To avoid danger of suffocation, keep the plastic packaging bag away from babies and children.
- Do not use this bag in cribs, beds, carriages, or play pens. This bag is not a toy.
- Always ensure the scooter is powered off and stable before performing any maintenance or installation.
- If you are unsure about any installation steps, seek professional assistance.
Setup and Installation
Proper installation is crucial for the performance and safety of your scooter. Please verify model compatibility before installation. This tire and inner tube are designed for Ninebot F20, F25, F30, and F40 electric scooters.

Figure 2: High Elastic Rubber Material suitable for Ninebot F20/F25/F30/F40 Electric Scooters.
General Installation Steps (Outer Tire and Inner Tube):
- Prepare the Scooter: Ensure the scooter is turned off and placed on a stable surface. If replacing a rear tire, it may be easier to remove the wheel assembly from the scooter.
- Deflate the Old Tire: If replacing an existing tire, fully deflate the inner tube by pressing the valve stem.
- Remove the Old Tire: Use tire levers to carefully pry the old tire bead off the rim. Remove the inner tube.
- Inspect the Rim: Check the rim for any damage, sharp edges, or debris that could puncture the new inner tube.
- Install the New Inner Tube: Slightly inflate the new inner tube to give it shape. Insert the valve stem through the valve hole in the rim.
- Install the New Outer Tire:
- Start by fitting one bead of the outer tire onto the rim.
- Carefully tuck the inner tube inside the outer tire, ensuring it is not pinched between the tire bead and the rim.
- Work the second bead of the outer tire onto the rim, using tire levers if necessary. Be extremely careful not to pinch the inner tube.
- Ensure the tire is seated evenly on the rim.
- Inflate the Tire: Slowly inflate the tire to the recommended pressure (refer to the tire sidewall or scooter manual for specific pressure). As you inflate, check that the tire beads are seating properly on both sides of the rim.
- Final Check: Inspect the tire for any bulges, pinches, or uneven seating. Reinstall the wheel assembly onto the scooter if it was removed.
Note: The outer tire features an anti-drop layer and an anti-slip layer for enhanced performance. Ensure proper orientation during installation.

Figure 3: Diagram illustrating the anti-drop layer and anti-slip layer on the tire sidewall.
Operating Considerations
While tires do not have "operating" instructions in the traditional sense, proper usage and awareness are key to their longevity and your safety:
- Maintain Correct Tire Pressure: Always keep your tires inflated to the manufacturer's recommended pressure. Under-inflated tires can lead to poor handling, increased rolling resistance, and premature wear. Over-inflated tires can reduce grip and make the ride uncomfortable.
- Ride Responsibly: Avoid sharp turns at high speeds, sudden braking, and riding over sharp objects or potholes, which can damage tires.
- Road Conditions: These tires are designed for various road conditions, offering excellent grip and off-road performance. However, always adjust your riding style to suit the current surface conditions.

Figure 4: Surface rubber grooves provide excellent grip, suitable for various road conditions including cobblestone, pavement, and rough surfaces.
Maintenance
Regular maintenance extends the life of your tires and ensures a safe riding experience.
- Check Tire Pressure: Check tire pressure at least once a week, or before every long ride, using a reliable pressure gauge.
- Inspect for Wear and Damage: Regularly inspect the tire tread for signs of wear, cuts, cracks, or embedded objects (like glass or thorns). Remove any embedded debris carefully.
- Clean Tires: Keep tires clean from dirt, mud, and oil. Use mild soap and water if necessary.
- Rotate Tires (if applicable): While less common for scooters, if you notice uneven wear between front and rear tires, consider rotating them if your scooter design allows.
Troubleshooting
Common Issues and Solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Flat Tire | Puncture in inner tube, faulty valve, tire bead not seated correctly. | Locate and repair/replace inner tube. Check valve for leaks. Re-seat tire bead. |
| Uneven Tire Wear | Incorrect tire pressure, misaligned wheel, aggressive riding style. | Ensure correct tire pressure. Check wheel alignment. Adjust riding habits. |
| Loss of Grip | Worn tread, incorrect tire pressure, riding on slippery surfaces. | Replace worn tires. Adjust tire pressure. Exercise caution on wet/slippery roads. |
| Tire Bulge | Internal damage to tire casing, improper installation. | Immediately replace the tire. Do not ride on a bulging tire. |
Specifications
| Feature | Detail |
|---|---|
| Type | Inner Tube and Outer Tire Replacement |
| Size | 10x2.125 inches |
| Material | High-quality Rubber |
| Compatibility | Ninebot F20, F25, F30, F40 Electric Scooters |
| Outer Tire A Dimensions | Diameter: 243mm (9.56 in), Inner Diameter: 151mm (5.94 in), Width: 54mm (2.12 in) |
| Outer Tire B Dimensions | Diameter: 243mm (9.56 in), Inner Diameter: 151mm (5.94 in), Width: 54mm (2.12 in) |
| Inner Tube Dimensions | Diameter: 225mm (8.89 in), Inner Diameter: 156mm (6.14 in), Width: 35mm (1.38 in) |
| Inner Tube Net Weight | Approx. 102g |
| Valve Length (Inner Tube) | Approx. 25mm (0.98 in) |
| Key Features | Strong Grip, Wear Resistance, High Elasticity, Shock Absorption, Anti-slip, Abrasion Resistant, Deep Tread Pattern, Ultra-low Rolling Resistance, Pressure Resistant |

Figure 5: Outer Tire A Dimensions.

Figure 6: Outer Tire B Dimensions.

Figure 7: Inner Tube Dimensions and Valve Detail.

Figure 8: Close-up of tire features including shock-absorbing layer, anti-slip texture, and high elasticity.

Figure 9: Tire performance highlights: Ultra-low rolling resistance, deep tread pattern, anti-slip, and abrasion resistance.
User Tips
- Always carry a portable pump and a patch kit for inner tubes on longer rides.
- Familiarize yourself with the process of changing a flat tire before you need to do it on the go.
- Consider professional installation if you are not confident in your ability to replace scooter tires, as improper installation can lead to safety hazards.
- Regularly check the condition of your tires, especially before and after rides on rough terrain.
Warranty and Support
For any warranty claims, technical support, or inquiries regarding your LCQPTW 10x2.125 inner tube and outer tire, please contact your original seller or the LCQPTW customer service department. Please have your purchase details ready when contacting support.
A user manual in PDF format may also be available for download from the seller's product page.