Focabo A98 Car DVR

Contents

Focabo A98 Car DVR User Manual

Model: A98 Car DVR

Brand: Focabo

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Focabo A98 Car DVR. Please read this manual carefully before use to ensure proper functionality and safety. This dash cam offers Full HD 1080P recording with dual lenses (front and cabin/rear), infrared night vision, and a wide-angle view to capture comprehensive footage of your driving environment.

Safety Information

  • Ensure the device is installed securely and does not obstruct the driver's view or interfere with airbag deployment.
  • Do not operate the device while driving. Adjust settings only when the vehicle is safely parked.
  • Use only the provided power accessories to prevent damage to the device and your vehicle.
  • The dash cam's built-in battery is for emergency power and settings retention only. It is not intended for continuous operation without external power. Always connect to the car's power supply for normal use.
  • Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.

Package Contents

Verify that all items are present in your package:

  • Main Dash Cam Unit
  • Rear Camera
  • Car Charger (Cigarette Lighter Adapter)
  • USB Cable
  • Mounting Bracket with Adhesive
  • Wiring for Rear Camera
  • User Manual (this document, also available as PDF)
Contents of the Focabo A98 Car DVR package
Figure 1: Package Contents

Product Overview

The Focabo A98 Car DVR features a compact design with multiple cameras and essential functions for vehicle recording.

Focabo A98 Car DVR with front, cabin, and rear cameras
Figure 2: Focabo A98 Car DVR Overview

Main Unit Features:

  • Front Camera: Records the road ahead with a 170° wide-angle lens.
  • Cabin Camera: Records the vehicle interior with a 120° wide-angle lens and infrared night vision.
  • Display Screen: For live view, playback, and menu navigation.
  • Buttons: OK (confirm/record), M (menu/mode), Up/Down (navigation).
  • MicroSD Card Slot: For memory card insertion.
  • USB-C Port: For power connection.
  • 2.5mm Jack: For rear camera connection.
Front view of the Focabo A98 main dash cam unit
Figure 3: Main Dash Cam Unit (Front View)
Side view of the Focabo A98 main dash cam unit showing ports
Figure 4: Main Dash Cam Unit (Side View with Ports)
Dimensions of the Focabo A98 main dash cam unit
Figure 5: Main Unit Dimensions

Setup

Follow these steps to set up your Focabo A98 Car DVR:

  1. Insert Memory Card: Insert a Class 10 or higher MicroSD card (up to 128GB) into the designated slot on the dash cam. Ensure it is inserted correctly with the contacts facing the correct direction.
  2. Attach Mount: Attach the adhesive mount to the top of the dash cam unit. Ensure the red adhesive is firmly pressed onto the dash cam's mounting slot.

    Video 1: Product demonstration and setup steps, including attaching the mount.

  3. Mount Dash Cam: Clean the windshield area where the dash cam will be mounted. Remove the protective film from the adhesive on the mount and firmly press the dash cam onto the windshield, ensuring it does not obstruct your driver's view.
  4. Connect Power: Connect the car charger to the dash cam's USB-C port and plug the other end into your vehicle's cigarette lighter socket. The dash cam will power on automatically when the vehicle starts.
    Diagram showing front and internal camera installation and connection to cigarette lighter
    Figure 6: Front and Internal Camera Installation
  5. Connect Rear Camera (Optional): Connect the rear camera cable to the 2.5mm jack on the main unit. Route the cable neatly along the car's interior trim to the rear of the vehicle. Mount the rear camera in a suitable location, typically near the rear license plate or inside the rear window. Connect the red wire of the rear camera to the car's reverse light power for parking assist functionality.
    Diagram showing rear camera installation and connection to backup light
    Figure 7: Rear Camera Installation
  6. Initial Settings: Upon first power-on, you may need to set the date, time, and language. Navigate the menu using the Up/Down buttons and confirm with the OK button.

Operating Instructions

Basic Operation

  • Power On/Off: The dash cam powers on automatically when the car starts and powers off when the car is turned off (if connected to a switched power source).
  • Recording: The dash cam automatically starts loop recording when powered on. A recording indicator will be visible on the screen. Press the OK button to start/stop recording manually.
  • Menu Navigation: Press the 'M' button to enter the menu. Use the Up/Down buttons to scroll through options and the OK button to select.

Key Features

  • Loop Recording: Videos are recorded in segments (e.g., 1, 3, or 5 minutes). When the memory card is full, the oldest unlocked files are overwritten automatically to ensure continuous recording.
    Diagram illustrating loop recording functionality
    Figure 8: Loop Recording
  • G-Sensor (Emergency Lock): The built-in G-sensor detects sudden impacts or collisions. When triggered, the current video segment is locked to prevent it from being overwritten during loop recording.
    Diagram showing G-Sensor collision detection
    Figure 9: G-Sensor Functionality
  • Parking Monitoring: When enabled, the dash cam will automatically start recording if it detects a collision or motion while the vehicle is parked. This feature requires a continuous power supply to the dash cam after the car is turned off.
  • Motion Detection: When enabled, the dash cam will automatically record when it detects a moving target in front of the camera. This is often used in conjunction with parking monitoring.
    Diagram showing 24-hour monitoring, emergency lock, and motion detection features
    Figure 10: Parking Monitoring, Emergency Lock, and Motion Detection
  • Night Vision: The dash cam features infrared night vision for clear recording in low-light conditions, especially for the cabin camera.
  • Playback: To view recorded videos, press the 'M' button to enter menu mode, then navigate to the playback option. Use the Up/Down buttons to select the desired video file and press the OK button to play it.
  • Parking Assist: With the rear camera properly installed and connected to the reverse light, the dash cam display will automatically show the rear view with parking guide lines when the vehicle is put into reverse.
    Diagram illustrating the ParkAssist feature with backup camera and parking guide lines
    Figure 11: ParkAssist Functionality

Specifications

Feature Specification
Working Temperature-10°C to +70°C
Power SourceCorded Electric
Data Storage Capacity64GB (Max External Memory 128G)
Built-in ScreenYes
Loop-Cycle Recording FeatureYes
Audio RecordedYes
Maximum Video Frame Rate30 fps
NightShot FunctionYes
Rear CameraYes
Touch ScreenNo
Screen Ratio16:9
Memory Card Required Reading SpeedClass 10
View angleFront: 170°, Cabin/Rear: 120°
Camera Resolution1920x1080
Video CodeH.264
Video FormatAVI
Batteries IncludedYes (Built-In)
Special FeaturesSD/MMC card support, Real Time Surveillance
Number Of Lenses2
Pixels800Mega
Display Size<3"
OSD LanguageArmenian, Chinese (Simplified), Dutch, English, French, Georgian, Italian, Japanese, Korean, Polish, Russian, Spanish, Thai, Turkish
GPS loggerExternal
Assembly ModePortable Recorder
Chipset ManufacturerGeneralplus
Item TypeCar DVR
CertificationCE

Troubleshooting

If you encounter any issues with your dash cam, please refer to the following common problems and solutions:

  • Video files are short/missing seconds: This can happen if the dash cam battery is low or if the motion detection function is enabled and constantly triggering short recordings. Ensure the dash cam is continuously powered by the car's cigarette lighter. Disable motion detection if not needed for continuous recording.
  • Device does not recognize the card: Ensure you are using a high-speed TF (MicroSD) card (Class 10 or higher). Try formatting the card within the dash cam's settings menu. If the issue persists, try a different card or reset the dash cam to factory settings.
  • Dash cam crashes/shuts down automatically: Ensure the dash cam is connected to a constant power supply. The internal battery is for emergency use only. Check the power connection and ensure it's stable. If using a step-down line, verify its output voltage.
  • Images are not clear enough: Check the camera lenses for dirt or smudges and clean them gently. Ensure any protective film has been removed from the lenses. Adjust image quality settings in the menu if available.
  • Parking monitoring not working: Ensure the parking monitoring function is enabled in the settings. If using a step-down line, ensure it provides continuous power after the car is off, or that the dash cam's internal battery is sufficiently charged for this feature.

User Tips

  • For optimal performance, regularly format your MicroSD card (e.g., once a month) to prevent data corruption and ensure smooth recording.
  • Always use a high-quality, high-speed (Class 10 or U3) MicroSD card from a reputable brand to avoid recording issues.
  • Periodically check the camera's view to ensure it's not obstructed and is capturing the desired area.

Maintenance

  • Keep the dash cam clean by wiping it with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
  • Ensure the lens is free from dust and smudges for clear recordings.
  • Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods when not in use.

Warranty and Support

For detailed warranty information, technical support, or further inquiries, please refer to the full user manual available as a PDF. You can access the PDF version of the user manual here: Focabo A98 Car DVR User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.