CHAOYIDIAN Solar Stigma Lamp

Contents

CHAOYIDIAN Solar Stigma Lamp User Manual

Spherical Stigma Lamp for Outdoor Villa, Garden, Courtyard, and Fence Lighting

1. Product Overview

The CHAOYIDIAN Solar Stigma Lamp is a spherical LED light designed for various outdoor lighting needs, including courtyards, gardens, ground approaches, and decorative flower beds. It operates on solar power, eliminating electricity costs and complex wiring, offering easy installation and automatic operation.

CHAOYIDIAN Solar Stigma Lamp, highlighting its solar power, zero electricity cost, and easy, wire-free installation. Suitable for courtyard, garden, ground approach, and flower bed decorative lighting.

CHAOYIDIAN Solar Stigma Lamp, highlighting its solar power, zero electricity cost, and easy, wire-free installation. Suitable for courtyard, garden, ground approach, and flower bed decorative lighting.

Package Contents:

  • Solar light main body x 1
  • Solar panel x 1 (integrated or separate, depending on model)
  • Installation accessory kit x 1

2. Quick Installation

This product is designed for simple, wire-free installation. Follow these steps for proper setup:

  1. Positioning:

    Install the solar panel in an unobstructed location with ample direct sunlight, preferably facing south, to maximize charging efficiency. The light should be directed towards the area you wish to illuminate.

  2. Fixation:

    Use the provided accessories to securely fasten the lamp and its bracket. If your model has a separate solar panel and lamp unit, connect the wires following the "positive to positive, negative to negative" principle. Ensure all wire connections are properly waterproofed to prevent short-circuit damage.

    Visual guide demonstrating the simple installation method for the solar lamp, emphasizing no drilling, no wiring, and no electricity cost. Shows lights on various posts.

    Simple installation method: Install and use, no drilling, no wiring, no electricity cost.

  3. Debugging:

    Turn on the power switch. Cover the solar panel with an opaque object (e.g., your hand). If the light turns on, the installation is correct. Remove the cover, and the light will automatically enter charging mode.

3. Operating Instructions

Smart Mode:

  • The lamp operates in a default light control mode, automatically turning on at dusk and off at dawn.
  • Some models may support additional features such as time control and human body induction (motion sensing). In induction mode, the light will brighten when motion is detected and dim when no one is present.
Illustration of the smart light control technology, showing the lamp charging during the day and automatically illuminating at night without manual intervention.

Smart light control technology: 0-second automatic light-up, no manual operation. Shows daytime charging and automatic night lighting.

Charging and Battery Life:

  • The lamp can be fully charged in 4-6 hours under normal direct sunlight.
  • Once fully charged, it can operate for 8-12 hours in constant-on mode.
  • The high-capacity battery supports continuous operation for 3-7 days even during rainy weather, recharging quickly on sunny days.
Infographic showing that daytime solar charging takes approximately 6-8 hours, and night automatic lighting lasts 8-15 hours.

Daytime solar charging takes approximately 6-8 hours, and night automatic lighting lasts 8-15 hours.

New Light Activation:

Before the first use, the lamp needs to be charged in direct sunlight for 24 hours to fully activate the battery. There is no need to deliberately discharge the battery during daily use.

4. Maintenance

  • Solar Panel Cleaning:

    Regularly wipe the surface of the solar panel with a soft cloth to remove dust and debris every 1-2 months. Use room-temperature water; avoid hot water, abrasive cloths, or harsh cleaners. Promptly clear any snow in winter to ensure proper charging.

  • Storage:

    If the lamp will not be used for an extended period, fully charge the battery before storage. Recharge the battery every 3 months to prevent damage from power loss due to undercharge.

  • Waterproof Features:

    The lamp has a waterproof level of ≥IP65, making it suitable for rain, dew, and light snow. Install it in a high, non-waterlogged spot to avoid long-term soaking and extend its service life.

    The solar lamp being sprayed with water, illustrating its waterproof and dustproof technology, designed for outdoor use.

    Waterproof and dustproof technology. Rainproof, dustproof, rustproof, designed for outdoor use.

5. Troubleshooting

Refer to the table below for common issues and their solutions:

Fault Solution
Light not turning on
  • Turn on the power switch.
  • Remove any obstacles from the solar panel.
  • Charge the solar panel for 1-2 days.
  • Check if the wiring connections are firm (for separate units).
Short lighting time
  • Adjust the position of the solar panel to ensure sufficient direct sunlight.
  • Switch to constant light mode if currently in energy-saving mode (if applicable).
  • Clean the solar panel surface.
Insufficient brightness or flickering
  • Fully charge the battery for 1-2 days.
  • Wipe the surface of the solar panel to remove dirt.
  • Check for unstable voltage (low-power warning).
  • Switch to high brightness mode (if applicable).
  • If issues persist after 1+ year, consider replacing the battery.

6. Specifications

Feature Detail
Product Name Pillar Lamp (Solar Stigma Lamp)
Material ABS + Acrylic lampshade
Light Source LED chip
Light Source Color White, Warm, Neutral, Red light (multi-color options available)
Charging Time 6-8 hours (direct sunlight)
Usage Time (Summer) 10-15 hours
Usage Time (Winter) 8-12 hours
Waterproof Level ≥IP65
Is Batteries Included Yes
Is Bulbs Included Yes
Is Dimmable Yes (varies by style)
Installation Method Assembly
Certification CE, ROHS
Voltage 220 V
Detailed product parameters including name, material, light source, color, charging time, and usage time, accompanied by an image of the internal battery.

Product parameters and internal battery.

7. User Tips

  • To ensure optimal performance and longevity, regularly clean the solar panel (every 1-2 months) with a soft cloth and room-temperature water.
  • Despite its IP65 waterproof rating, installing the lamp in a high, non-waterlogged spot can further extend its service life by preventing prolonged submersion.
  • If you plan to store the lamp for an extended period, fully charge the battery beforehand and recharge it every 3 months to prevent battery degradation.
  • The batteries are replaceable. If replacement is needed, contact after-sales support for compatible models and guidance on self-installation.

8. Important Considerations

  • Wiring Safety: It is strictly forbidden to reverse the positive and negative poles of the wires. Ensure all wire interfaces are properly waterproofed to prevent short circuits and product damage.
  • Product Integrity: Do not disassemble or modify the product without authorization.
  • Environmental Conditions: Avoid placing the product in environments with extremely high or low temperatures, as this can affect performance and lifespan.

9. Warranty and Support

The typical service life for the lamp body is 3-5 years, the solar panel 5-8 years, and the battery 2-3 years, varying based on environmental conditions and usage.

For persistent issues, battery replacement, or any other support needs, please contact after-sales service via your order page. They can provide matching battery models and further assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.