Massate LP-E10

Contents

Massate LP-E10 Battery and 3-Slot Charger User Manual

Model: LP-E10 | Brand: Massate

This manual provides essential information for the safe and efficient use of your Massate LP-E10 batteries and 3-slot USB charger.

1. Product Overview

The Massate LP-E10 battery and 3-slot USB charger kit is designed to provide extended power for your compatible Canon EOS Rebel digital cameras. The kit includes high-capacity rechargeable Lithium-ion batteries and an intelligent charger capable of charging three batteries simultaneously.

Massate LP-E10 batteries and 3-slot USB charger kit
Figure 1: Massate LP-E10 batteries and 3-slot USB charger kit.

2. Specifications

Attribute Value
Brand Name Massate
Model Number LP-E10
Type Standard Battery
Rechargeable Yes
Use Camera
Origin Mainland China
Certification CE, FCC, RoHS
Capacity 1500mAh / 11.1Wh
Voltage 7.4V
Battery Type Rechargeable Li-ion Battery
Charger Type 3-Channel Smart Charger
Charger Dimensions 13.3 x 8.6 cm
Charger Weight 115g
Compatible with Canon EOS Rebel T3, T5, T6, T7, T100, 1100D, 1200D, 1300D, 1500D, 2000D, 3000D, 4000D, Kiss X50, X70, X80
Charger dimensions and weight
Figure 2: Charger dimensions and weight.

3. Package Contents

The package includes the items as per your selection, typically:

  • Massate LP-E10 Rechargeable Lithium-ion Battery(ies)
  • Massate 3-Slot USB Charger
  • USB Charging Cable

4. Setup and Initial Use

  1. Initial Charge: Completely charge the battery(ies) before first usage.
  2. First 3 Cycles: For the first 3 charging cycles, discharge the battery to 5-7% capacity and then fully charge it again. This helps optimize battery performance.
  3. Connect Charger: Connect the 3-slot USB charger to a power source using the provided USB cable. This can be a wall adapter, power bank, car charger, or laptop USB port.
  4. Insert Batteries: Insert the LP-E10 batteries into the charger slots. Ensure they are correctly oriented.
  5. Monitor Charging: The charger features indicator lights for each slot. A red light indicates charging, and a green light indicates a full charge or no battery inserted.
Various charging methods for the USB charger
Figure 3: The 3-slot USB charger can be powered by various USB sources.
Charger indicator lights: Red for charging, Green for full charge or no battery
Figure 4: Charger indicator lights. Red indicates charging, Green indicates full charge or no battery.

5. Operating Instructions

5.1 Charging Batteries

  • Only charge the battery with a compatible charger, such as the included 3-slot USB charger.
  • Do not charge the battery unattended or entrust it to children.
  • The intelligent charger allows simultaneous charging of one, two, or three batteries.

5.2 Using Batteries with Your Camera

  • Only use the battery with compatible Canon EOS Rebel devices as listed in the specifications.
  • Ensure the battery is fully charged for optimal performance.

6. Maintenance

6.1 Battery Care and Storage

  • For an optimal lifespan, store the battery with approximately 60% of its nominal capacity.
  • A battery discharges over time. Deep discharge can irreversibly damage the battery and is a common cause of battery failure.
  • Check the battery charge periodically. If possible, use the battery as your main power source and keep the original camera battery as a reserve.
  • Remove the battery from the device if you intend to store it or not use it for longer periods of time.

6.2 Charger Care

  • Keep the charger clean and free from dust and moisture.
  • Do not attempt to disassemble or modify the charger.

7. Troubleshooting

  • Battery not charging: Ensure the charger is properly connected to a power source and the batteries are correctly inserted. Check if the indicator lights are red. If not, try a different USB cable or power source.
  • Short battery life: Ensure batteries are fully charged before use. Follow the initial charging cycles recommendation. Store batteries at approximately 60% charge when not in use for extended periods.
  • Charger indicator not working: Verify the charger is receiving power. If the lights do not illuminate with or without batteries, the charger may be faulty.

8. Safety Information

Failure to follow these safety instructions may result in fire, electric shock, or other injury or damage.

  • ATTENTION! Opening and/or disassembly of the product may only be performed by trained service personnel.
  • ATTENTION! Fire hazard due to overload! Pay attention to the maximum output currents of the product. In disturbances such as deformation, discoloration, leakage of fluids or similar, disconnect the device immediately. If possible, transport outdoors for best possible ventilation. Liquid spillages can ignite.
  • ATTENTION! Risk of short circuit! Do not bridge any contacts!
  • ATTENTION! Avoid contact with liquids, fire, dust, and temperatures above 60°C.
  • ATTENTION! Upon contact with fluids emerging from the battery, immediately rinse with clear water or, in case of eye contact, rinse thoroughly and consult a doctor immediately. There is a risk of injury or blindness.
  • NOTE! Use equipment only in dry areas. Do not operate unattended or entrust to children.
  • Do not change or modify the product or its accessories.
  • Areas of application not described in this manual are not permitted and will result in the loss of warranty, guaranty, and liability.
Close-up of a single Massate LP-E10 battery with safety warnings
Figure 5: LP-E10 battery with printed safety warnings.

9. Warranty and Support

The manufacturer is not liable for damage to person and/or property caused by improper installation, maintenance, usage, or operation.

The warranty only covers the product itself, as the manufacturer does not have an influence on the installation of the product.

For support or warranty claims, please contact Massate Digital Store directly.

Manufacturer Contact:

Shenzhen Oulitai Electronic Technology Co., Ltd.
402, Building 3, No.23 Songshanzai Road, Xinhe Community, Fucheng Street,
Longhua District, Shenzhen City, Guangdong Province, China, 518110

10. Disposal Information

Rechargeable batteries are hazardous waste and do not belong in household waste. Dispose of the product at the end of its service life in accordance with applicable statutory provisions and local regulations. The BattG register number is 21000459.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.