Introduction
The VILCORN Y01 Wireless Arcade Fight Stick is an ergonomically designed, comfortable, and versatile gaming controller. It supports multiple platforms including PS3, PS4, Switch, PC, Android, and iOS devices, offering both wired and wireless connectivity options. This manual provides detailed instructions for setting up, operating, and maintaining your arcade fight stick to ensure an optimal gaming experience.

Setup
Package Contents
- VILCORN Y01 Wireless Arcade Fight Stick
- USB Data Cable (for wired connection and charging)
- Optional: Stretchable Phone Bracket (supports phones with a width of 48-91mm)
- User Manual (PDF available for reference)

Physical Overview
The Y01 features a standard arcade layout with a rocking bar (joystick) and multiple function keys. Key components include:
- Rocking Bar (Joystick): For directional control.
- Function Keys: A, B, X, Y, L, R, L2, R2, SELECT, START, TURBO, HOME.
- Charging/Reset Port: USB port for charging and resetting the device.
- Indicators (1, 2, 3, 4): LED lights indicating connection status and mode.

Charging the Device
The fight stick has a built-in 600mAh battery. To charge:
- Connect the USB data cable to the charging port on the device and a power source.
- Low Power: The indicator light will flash quickly.
- Charging: The indicator light will flash slowly.
- Fully Charged: The indicator light will turn off.
A full charge typically takes approximately 2 hours and provides about 15 hours of battery life.

Operating Instructions
Connection Methods
The VILCORN Y01 supports wired, Bluetooth (BT) wireless, and 2.4G wireless connections.

Wired Mode
The device automatically identifies the system platform when connected via USB cable. Supported platforms include Android, PC (D-input and X-input), PS3, and Switch.
- For PS3/PS4/PS5: Connect the gamepad directly to the console using the TYPE-C USB data cable. Press the "HOME" key to pair. Indicator 1 will be on for a long time upon successful connection.
- For PC/PS3/Switch: Connect the device via USB cable. On PC, press the HOME key for 2 seconds to switch between PC/PS3 mode and XBOX360 mode.
Bluetooth Mode
The Y01 uses Bluetooth 5.0 EDR/BLE for wireless connection.
- For Switch Model:
- On the Switch host, navigate to "Controllers" -> "Change Grip/Order".
- Press the "R2 + HOME" key for 2 seconds to enter pairing mode. The LED light will flash.
- Upon successful pairing, indicator 4 will be on for a long time.
- Press the HOME key directly to reconnect automatically.
- For Android ShootingPlusV3 Model (Harmony system compatible):
- Press the "A + HOME" key for 2 seconds to enter V3 Android mode. The rocker lamp will flash.
- On your Android phone, search for "BSP-Y01" and select Connect.
- Upon successful connection, indicator 4 will be on for a long time.
- Press the HOME key directly to reconnect automatically.
- For iOS ShootingPlusV3 Model:
- Press the "Y + HOME" key for 2 seconds to enter V3 iOS mode. The turntable lamp will flash quickly.
- On your Apple device, search for "BSP-Y01" and select Connect.
- Upon successful connection, indicator 3 will be on for a long time.
- Press the HOME key directly to reconnect automatically.
- For Android Standard Mode:
- Press the "X + HOME" key for 2 seconds to enter standard Android mode. The rocker lamp will flash quickly.
- On your Android/Hongmeng phone, search for "BSP-Y01" and select Connect.
- Upon successful connection, indicator 2 will be on for a long time.
- Press the HOME key directly to reconnect automatically.
- For iOS MFi/Apple Arcade Mode (iOS 13.0 or above):
- Press the "B + HOME" key for 2 seconds to enter iOS MFi mode. The rocker lamp will flash quickly.
- On your Apple device, search for "DUALSHOCK 4 Wireless Controller" and select Connect.
- Upon successful connection, indicator 1 will be on for a long time.
- Press the HOME key directly to reconnect automatically.
- For Windows 10 Laptop (X-Input games):
- Press the "R + HOME" key for 2 seconds to enter computer Bluetooth mode. The console lamp will flash quickly.
- On your computer, search for Bluetooth devices, find "xbox wireless controller", and click Connect.
- Upon successful connection, indicator lights 2, 3, and 4 will stay on.
- Press the HOME key directly to reconnect automatically.

2.4G Wireless Mode (PC)
This mode requires an optional 2.4G computer receiver (e.g., "apolegamy" or "xbox one receiver").
- PC 2.4G Computer Receiver Mode:
- Plug the computer receiver into your PC.
- Press the "L + HOME" key for 2 seconds to enter computer mode. The rocker lamp will flash quickly.
- Upon successful connection, indicator lights 3 and 4 will be on for a long time.
- Press the HOME key directly to reconnect automatically.
- To switch between PC/PS3 mode and XBOX360 mode in computer receiver mode, press "SELECT + START" for 2 seconds.
Special Features
Turbo Function
The Turbo function allows for rapid, continuous input of a button press.
- Activate Turbo: Press a desired action button (e.g., "A") and then press "TURBO". The button will now send repeated inputs.
- Automatic Continuous Firing: Press the action button and "TURBO" a second time.
- Deactivate Turbo: Press the action button and "TURBO" a third time to turn off the burst.
- Adjust Burst Speed: While a button is in automatic continuous firing mode, press and hold "TURBO + rocker up/down" to adjust the speed. Available speeds are 8, 15, and 25 times per second.

Macro Programming
Set combination buttons to trigger complex actions with a single press.
- Enter Programming Mode: Press and hold the front programming key (usually located on the front edge) and then press the side M1 key. The indicator light will flash quickly.
- Record Macro: While in programming mode (HOME light flashing quickly), press the sequence of keys you want to record. For example, press A, then B, then X, then Y.
- Save Macro: After recording the sequence, press the M1 key again. The indicator light will stay on, indicating the macro is saved.
- Clear Macro: Press the programming key + M1 key to enter programming mode. Without typing any key values, press the M1 key again to clear the macro.

Switching Rocker Mode (Joystick to D-pad)
The joystick can be switched to function as a D-pad for compatibility with more game types.
- Switch Mode: Press the "HOME" button once to enter joystick mode. The rocker's joystick switches to the cross button (D-pad) function.
- Restore Mode: Click "HOME" again to restore it to normal joystick operation.

Sleep and Wake-up Function
- Automatic Sleep: The handle will automatically shut down and enter sleep mode if there is no key operation within 5 minutes.
- Wake-up: To use the handle again, press the "HOME" key to wake it up and reconnect.
Maintenance
- Do not store this product in a damp or high-temperature environment.
- Avoid knocking, dropping, sticking, puncturing, or attempting to disassemble the product to prevent damage.
- The product contains a built-in battery; do not discard it with general garbage.
- Do not charge the handle near fire or other heat sources.
- Non-professional personnel should not disassemble this product. Disassembly by unauthorized personnel will void the after-sales warranty service.
Troubleshooting a Stuck Joystick
If the game joystick gets stuck, follow these steps:
- Grasp the game joystick firmly.
- Push the joystick to the middle position.
- Press the joystick down with a slight force to reset it.

Troubleshooting
General Issues
- Device not supported by mobile phone: Due to mobile phone system problems, some mobile phones may not support this device.
- Game not connecting: Due to irresistible factors such as software upgrades or source code changes of the official game platform, some games cannot be connected with this product for operation. The manufacturer reserves the right of final interpretation.
Frequently Asked Questions (FAQ)
- Q: How do I connect my Android phone?
- A: Turn on Bluetooth, press X first, then press Home. Match "bsp-y01". The third light will illuminate to indicate a successful connection. This method is suitable for playing games that come with the TV or games within apps like Chicken Simulator and Octopussy.
- Q: Some games require the use of cross buttons (D-pad), but there is only a joystick. How can I switch the joystick to cross buttons?
- A: Click the "HOME" button once to switch the joystick to D-pad mode. Click "HOME" again to revert to joystick mode.
- Q: What devices can it connect to?
- A: It supports PCs, Switch consoles, Android phones, iOS phones, PS3, and PS4. Please note that it does NOT support Xbox, Game Stick, or Gamebox.
Specifications
| Feature | Detail |
|---|---|
| Model Number | Y01 |
| Type | Joysticks |
| Interface Type | USB, Bluetooth |
| Compatible Brand/Model | PC (PS3, PS4, Switch, Android, iOS) |
| Language | English Version |
| Certification | CE |
| Origin | Mainland China |
| Working Voltage | DC3.7V |
| Working Current | <35mA |
| Sleep Current | <5uA |
| Charging Voltage/Current | DC5V/500mA |
| Battery Capacity | 600mAh |
| Battery Life | ~15 hours |
| Charging Time | ~2 hours |
| Bluetooth Transmission Distance | <=8M |
| Standby Time | 30 days at full power |
| Dimensions (approx.) | 14.4cm (Width) x 11cm (Height) |

User Tips
- Joystick Responsiveness: If the joystick occasionally gets stuck in one direction, try the troubleshooting steps for a stuck joystick (push to middle, then press down slightly). Ensure no debris is obstructing its movement.
- Compatibility Check: While the Y01 is highly versatile, always double-check the specific connection method for your platform (PS3/PS4, Switch, PC, Android, iOS). Remember it does not support Xbox, Game Stick, or Gamebox.
- App for Key Mapping: For advanced key mapping and customization on Android/Hongmeng/iOS, download and use the "ShootingPlus V3" APP.
Warranty and Support
For warranty claims or technical support, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty-related inquiries.
The manufacturer reserves the right of final interpretation regarding product functionality and compatibility, especially concerning issues arising from software upgrades or source code changes in official game platforms.