MiGuer Open Ear Clip Wireless Bluetooth Earbuds

Contents

MiGuer Open Ear Clip Wireless Bluetooth Earbuds User Manual

Model: Open Ear Clip Wireless Bluetooth Earbuds

Brand: MiGuer

1. Introduction

Thank you for choosing the MiGuer Open Ear Clip Wireless Bluetooth Earbuds. These earbuds feature an innovative non-in-ear design for comfortable, long-term wear, advanced Bluetooth 5.3 connectivity, and intuitive touch controls. Designed for various scenarios including sports, work, and daily listening, they offer clear audio with minimal sound leakage and robust IPX6 water resistance.

This manual provides essential information on how to set up, operate, maintain, and troubleshoot your earbuds to ensure optimal performance and longevity.

2. Package Contents

Please check the box for the following items:

  • MiGuer Open Ear Clip Wireless Bluetooth Earbuds (Left and Right)
  • Charging Case
  • USB Type-C Charging Cable
  • User Manual (this document)

3. Product Overview

Familiarize yourself with the components of your earbuds and charging case.

MiGuer Open Ear Clip Wireless Bluetooth Earbuds and Charging Case (White)

Figure 3.1: MiGuer Open Ear Clip Wireless Bluetooth Earbuds and Charging Case (White)

Earbuds in charging case, showing digital power display and non-in-ear design.

Figure 3.2: Earbuds in charging case, showing digital power display and non-in-ear design.

Diagram illustrating touch control functions for playback, calls, volume, and voice assistant.

Figure 3.3: Diagram illustrating touch control functions for playback, calls, volume, and voice assistant.

Video 3.1: 360-degree product view of the MiGuer Open Ear Clip Wireless Bluetooth Earbuds and Charging Case.

4. Setup

4.1. Charging the Earbuds and Case

Before first use, fully charge the earbuds and charging case.

  1. Connect the USB Type-C charging cable to the charging port on the case and a power source.
  2. The digital power display on the charging case will indicate the charging status.
  3. A full charge for the case takes approximately 2 hours.
  4. Ensure the earbuds are properly seated in the charging case. The case will detect earphone storage status and begin charging automatically.

Friendly Reminder: Please be aware of potential fire risks and strictly follow the instructions for charging. Dispose of lithium-ion batteries safely in accordance with local legal requirements.

4.2. Pairing with a Bluetooth Device

  1. Power On: Open the earphone charging bin. The earbuds will power on automatically, and the indicator light will flash.
  2. Pairing Mode: The earbuds will automatically enter pairing mode when taken out of the case.
  3. Connect: On your mobile phone or Bluetooth-enabled device, go to Bluetooth settings and search for available devices. Select "MiGuer Earbuds" (or similar name) from the list to connect.
  4. Confirmation: Once connected, the indicator light on the earbuds will stop flashing, and you may hear an audible confirmation.

Note: This product can be connected with any device that supports Bluetooth function.

5. Operating Instructions

The earbuds feature intuitive touch controls on each earbud. Refer to Figure 3.3 for a visual guide.

5.1. Basic Touch Controls

Action Control Function
Play/Pause 1 Tap (Left or Right Ear) Play or pause audio playback.
Answer/End Call 2 Taps (Left or Right Ear) Answer an incoming call or end an active call.
Reject Incoming Call Long Press (Left or Right Ear) Reject an incoming call.
Previous Track 2 Taps (Left Ear) Skip to the previous audio track.
Next Track 2 Taps (Right Ear) Skip to the next audio track.
Volume Down Long Press (Left Ear) Decrease playback volume.
Volume Up Long Press (Right Ear) Increase playback volume.
Activate Voice Assistant 3 Taps (Right Ear) Wake up your device's voice assistant (e.g., Siri, Google Assistant).
Game Mode On/Off 3 Taps (Left Ear) Toggle game mode for lower latency.

5.2. Single and Double Ear Switching

The earbuds support seamless switching between using a single earbud (mono mode) or both earbuds (stereo mode). Simply take one earbud out of the case to use it independently, or take both out for a stereo experience. The earbuds will automatically adjust.

Earbuds and charging case with a smartphone, illustrating single and double ear switching capability.

Figure 5.1: Single and double ear switch at will for more comfortable control.

6. Maintenance

6.1. Cleaning

  • Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth.
  • Do not use abrasive cleaners, solvents, or aerosol sprays.
  • Ensure charging contacts on both earbuds and case are clean and free of debris to maintain proper charging.

6.2. Water Resistance (IPX6)

The earbuds are rated IPX6 water-resistant, meaning they can withstand high-pressure water jets from any direction. This makes them suitable for use during workouts and in rainy conditions.

  • Do not submerge the earbuds in water.
  • The charging case is NOT water-resistant. Keep it dry.
  • If earbuds get wet, wipe them dry completely before placing them back in the charging case to prevent damage.
Earbuds and charging case on a wet surface, demonstrating IPX6 water resistance.

Figure 6.1: IPX6 Water-resistant earbuds for worry-free use.

6.3. Storage

  • Store the earbuds in their charging case when not in use to protect them and keep them charged.
  • Avoid extreme temperatures and direct sunlight.

7. Troubleshooting

If you encounter any issues, try the following solutions:

  • Earbuds not pairing:
    • Ensure both earbuds are charged.
    • Place both earbuds back in the charging case, close the lid, wait a few seconds, then open the lid and take them out again.
    • Turn off Bluetooth on your device, then turn it back on and try pairing again.
    • Forget the device from your phone's Bluetooth list and re-pair.
  • Only one earbud working:
    • Ensure both earbuds are charged.
    • Place both earbuds back in the charging case, close the lid, then open and take them out simultaneously.
    • If the issue persists, try resetting the earbuds (refer to the full PDF manual for specific reset instructions if available).
  • No sound or low volume:
    • Check the volume level on both your earbuds (via touch control) and your connected device.
    • Ensure the earbuds are properly connected to your device.
    • Clean any debris from the earbud speakers.
  • Charging issues:
    • Ensure the charging cable is securely connected to both the case and the power source.
    • Check if the charging contacts on the earbuds and inside the case are clean.
    • Try a different USB Type-C cable or power adapter.

8. Specifications

Feature Detail
Brand NameMiGuer
StyleOWS Ear Clip Headphones
CommunicationWireless (Bluetooth)
ConnectorsType-C
Bluetooth Version5.3
Wireless Range<10m
Vocalism PrincipleDynamic
Earcups TypeSemi-open
Sound IsolatingYes
Active Noise-CancellationYes (ENC Noise Cancellation)
With MicrophoneYes (Dual-microphone array)
Control TypeTouch Control
Volume ControlYes
Waterproof RatingIPX6
Charging MethodCharging case (Type-C)
Battery LifeUp to 68 hours (with charging case)
DriverCustom 13mm Titanium Plated Diaphragm, Hi-Fi Dynamic Driver
Decoding SystemAAC Advanced Decoding System
Impedance RangeUp to 32 Ω
MaterialPlastic
Weight40g
Frequency Response20Hz-20KHz
CategoryEarphones & Headphones
FunctionFor Internet Bar, Video Game, Common Headphone, Mobile Phone, HiFi Headphone
CertificationCE, FCC, RoHS
OriginMainland China
Support APPNo
Support Memory CardNo
NFC TechnologyNo
Voice Assistant Built-inNo (Supports activating device's voice assistant)
High-concerned chemicalNone
Diagram of the high-end Bluetooth 5.3 chip for stable and fast connection.

Figure 8.1: High-end Bluetooth 5.3 Chip for faster, stabler connection with anti-interference.

Illustration of ENC Noise Cancellation Technology with dual-microphone array for clear calls.

Figure 8.2: ENC Noise Cancellation Technology for clear calls, even in busy areas.

Earbuds and charging case on a rock, highlighting 68 hours of long-lasting playback.

Figure 8.3: Genuine Battery Life: 68 Hours of Long-lasting Playback with the charging case.

Exploded view of the earbud's 13mm titanium plated diaphragm and Hi-Fi dynamic driver.

Figure 8.4: Custom 13mm titanium plated diaphragm and Hi-Fi dynamic driver for advanced sound quality.

9. User Tips

  • Optimal Fit: Experiment with the ear clip position to find the most comfortable and secure fit for your ear shape. A good fit enhances sound quality and reduces sound leakage.
  • Awareness: The open-ear design allows you to hear your surroundings, which is great for outdoor activities or commuting. Always be mindful of your environment.
  • Volume Sync: Ensure your phone's volume is synchronized with the earbuds for consistent control.
  • Regular Charging: For best battery life, fully charge the case and earbuds regularly, especially if not used for extended periods.

10. Warranty and Support

For detailed warranty information and further support, please refer to the official product documentation or contact MiGuer customer service. A comprehensive user manual in PDF format is available for download at: MiGuer Earbuds User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.