Suetlcoity Console Armrest Storage Tray

Contents

User Manual

Console Armrest Storage Tray for Hyundai Genesis GV80 (2021-2024)

Brand: Suetlcoity

1. Product Overview

This console armrest storage tray is precisely designed to fit Hyundai Genesis GV80 models from 2021 to 2024. It is crafted from TPE/silicone/high elastic ABS material, ensuring a soft touch, wear resistance, and non-slip properties. The tray effectively protects the original car groove and cup holder from dust, dirt, and abrasion, while improving interior storage utilization by organizing small items.

Console Armrest Storage Tray with rubber pads

Image: The storage tray installed in a car's center console, with an inset showing the tray and its rubber pads.

2. Setup and Installation

2.1 Compatibility

This storage tray is compatible with Hyundai Genesis GV80 models from 2021, 2022, 2023, and 2024. It is NOT designed to fit the 2025 model.

Compatibility information for Hyundai Genesis GV80 2021-2024

Image: The storage tray installed in a car's center console, with text confirming compatibility for GV80 2021-2024 and explicitly stating 'Not Fit 2025'.

2.2 Preparation (Critical for Strong Adhesion)

Proper surface preparation is essential for maximum bonding strength of the 3M tape.

  1. Choose a clean, dry, and well-ventilated area. Avoid direct sunlight or humid environments during installation.
  2. Clean the target surface with the provided alcohol wipe (or 50-70% isopropyl alcohol solution) to remove dust, grease, and fingerprints.
  3. Allow the surface to air-dry completely for 1-2 minutes. Do not wipe after cleaning.
  4. Ensure the installation temperature is between 15°C-35°C (59°F-95°F). Low temperatures can reduce adhesive effectiveness.

2.3 Step-by-Step Installation

  1. Peel off the red protective film from the 3M tape. Avoid touching the adhesive surface with bare fingers.
  2. Align the storage box with the desired installation position in the armrest.
  3. Press firmly on the entire surface of the accessory for 30 seconds. Apply a minimum pressure of 15 lbs (6.8 kg) to activate the adhesive.
  4. Do not move or remove the accessory within 24 hours. This allows the adhesive to fully cure for permanent bonding.

3. Operating Instructions

The armrest storage tray is designed for simple placement and organization. Once installed, it provides a convenient space to store small items within your vehicle's center console. The tray features a dedicated coin storage area and a reserved data cable port for easy access and charging.

Console Armrest Storage Tray filled with phone, wallet, and coins

Image: The storage tray installed in a car's center console, demonstrating its use for organizing a phone, wallet, and coins.

4. Maintenance & Care

  • Clean the accessory with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these may damage the material.
  • Check the adhesion monthly. If the edges begin to lift, reapply pressure. Ensure the surface is clean before reapplying pressure if necessary.
  • For removal: Use a 3M adhesive remover or gently heat the tape with a hair dryer on a low setting to soften the bond. Then, peel off the tray slowly.

5. Troubleshooting

Problem Solutions

  • Accessory falls off: Recheck surface cleanliness, ensure installation temperature was adequate, and apply more pressure during installation.
  • Adhesive residue left: Wipe with alcohol or a specialized 3M adhesive remover.
  • Misalignment after installation: If noticed within 5 minutes (before the adhesive fully cures), remove and reposition. If more than 24 hours have passed, follow the removal instructions in the Maintenance & Care section first.

6. Specifications

Feature Detail
Product Shape Rectangle
Material ABS Plastic (with TPE/silicone elements)
Special Features Lightweight, Soft touch, Easy to clean, Waterproof, Durable, Non-slip
Type Armrest Box Storage
Dimensions (Approx.) Length: 9.44 in, Width: 6.48 in, Height: 6.1 in
Packaging Contents One tray and 2 rubber pads
High-concerned chemical None
Diagram showing dimensions of the storage tray, coin storage, and data cable port

Image: Detailed diagram illustrating the dimensions of the storage tray, including the coin storage area and reserved data cable port.

7. Important Warnings

  • Do not install this accessory on airbag deployment areas (e.g., steering wheel, door panels near airbags) as it may interfere with vehicle safety systems.
  • Do not use or place the accessory near open flames or high-temperature sources. The adhesive may weaken above 60°C (140°F).

8. User Tips

While no specific user tips were available from reviews or Q&A, here are some general recommendations for maximizing your experience with the storage tray:

  • Utilize the dedicated coin storage for easy access to change.
  • The reserved data cable port allows for neat cable management when charging devices.
  • Regularly check the tray's position to ensure it remains stable and does not interfere with the armrest's functionality.

9. Warranty & Support

Warranty Period

This product comes with a 12-month warranty from the date of purchase. The warranty covers manufacturing defects and does not cover issues arising from improper use.

Contact Us

  • Customer Service Email: 1402397252@qq.com
  • Service Hours: 9:00 AM - 6:00 PM (GMT+8), Monday to Friday

For further assistance, you may also refer to the official user manual PDF available for download: Download User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.