YTYIN Car Animal Repellent Alarm

Contents

YTYIN Car Animal Repellent Alarm User Manual

1. Introduction

Thank you for choosing the YTYIN Car Animal Repellent Alarm. This device is designed to enhance your driving safety by deterring deer and other wildlife from colliding with your vehicle. This manual provides essential information on how to properly install, operate, and maintain your animal repellent alarms.

The YTYIN Car Animal Repellent Alarm is a wind-activated device that emits ultrasonic and wind-whistling sounds when your vehicle travels at speed, alerting animals to your presence and encouraging them to move away from the road.

2. Package Contents

  • 4 x Car Animal Repellent Alarms

3. Specifications

BrandYTYIN
OriginMainland China
Dimensions (Approx.)5 cm (Length) x 3.1 cm (Total Height) x 1.9 cm (Base Height)
Activation SpeedOver 35 mph (for sound delivery)
Warning RangeUp to 1/4 mile
MaterialDurable ABS Plastic
CertificationsCE

Dimensions Diagram:

Diagram showing the dimensions of the animal repellent alarm: 5cm/1.96in length, 1.9cm/0.74in base height, 3.1cm/1.22in total height.

Image: Dimensions of the YTYIN Car Animal Repellent Alarm.

4. Setup & Installation

For optimal performance, install the alarms in a location with good airflow and ensure they are securely attached.

  1. Choose Location: Select a flat, clean surface on the front of your vehicle, such as the front bumper or roof. The chosen area should have good air circulation.
  2. Clean Surface: Thoroughly clean the chosen mounting surface with rubbing alcohol and let it dry completely. This ensures maximum adhesion.
  3. Prepare Alarm: Remove the protective film from the double-sided adhesive tape on the base of each alarm.
  4. Attach Alarm: Firmly press the alarm onto the cleaned surface. Ensure the opening of the alarm faces forward, in the direction of travel. Apply pressure for at least 30 seconds to ensure a strong bond.
  5. Repeat: Install a second alarm on the opposite side of the vehicle's front for balanced coverage.

Installation Area Example:

Image showing a car dashboard with an animal repellent alarm installed, indicating 'Installation Area Should have good air flow, you can install them on the front bumper or roof.'

Image: Recommended installation area for the animal repellent alarm.

Note on Adhesive:

Image showing a deer running on a highway with sound waves emanating from a car, and a close-up of the strong double-sided tape on the repellent. Text states: 'We upgraded ordinary double-backed tapes to very strong tapes, and they will stay in place even through professional car washing.'

Image: The upgraded strong double-sided tape ensures secure attachment, even through car washes.

5. Operation

The YTYIN Car Animal Repellent Alarm operates passively, utilizing wind to generate its deterrent sounds.

  • Wind Activation: As your vehicle travels at speeds exceeding 35 mph, wind flows through the alarm's opening.
  • Sound Emission: This airflow generates both ultrasonic and wind-whistling sounds. These sounds are designed to be audible to animals but generally inaudible or minimally audible to humans inside the vehicle.
  • Animal Deterrence: The emitted sounds travel up to 1/4 mile, alerting deer and other wildlife to the approaching vehicle. This encourages them to move away from the road, reducing the risk of collisions.

How it Works:

Composite image showing a deer crossing a road, a car with red circles indicating sound emission, a 'no deer' sign, and four animal repellent alarms in the foreground.

Image: Visual representation of the animal repellent alarm in action, deterring deer.

6. Maintenance

  • Cleaning: Periodically wipe the alarms with a soft, lint-free cloth to remove dirt, dust, or debris that might obstruct the sound openings.
  • Inspection: Regularly check the alarms for any signs of damage or if they have become loose. Ensure they are securely attached, especially after car washes.
  • Storage: If you remove the alarms from your vehicle for any reason, store them in a dry place at room temperature (15°C - 35°C).

7. Troubleshooting

  • No Sound Detected: Ensure your vehicle speed is consistently above 35 mph. Check the alarm openings for any obstructions (e.g., mud, insects).
  • Alarm Falls Off: The mounting surface might not have been clean and dry during installation, or the adhesive may have worn out. Clean the area thoroughly and reapply the alarm using new, strong automotive-grade double-sided tape.
  • Reduced Effectiveness: Ensure the alarms are clean and free from obstructions. Consider replacing them if they show significant wear or damage.

8. User Tips

Based on general best practices for animal repellent alarms:

  • For optimal coverage and effectiveness, install a pair of alarms on the front of your vehicle, spaced appropriately.
  • Always ensure the alarms are securely attached, especially before entering automatic car washes, to prevent them from being dislodged.
  • While these devices are effective deterrents, they are not a guarantee against animal collisions. Always drive cautiously, especially in areas known for wildlife activity.

9. Safety & Warnings

  • Keep Out of Reach of Children: This product is not a toy. Keep it away from small children to prevent choking hazards or misuse.
  • Inspect Before Use: Always inspect the alarms for any damage before installation or use. Do not use if the product appears damaged.
  • Secure Installation: Ensure the alarms are securely attached to your vehicle according to the installation guidelines. Loose alarms can become projectiles.
  • Environmental Exposure: While designed for outdoor use, avoid exposing the alarms to extreme temperatures or harsh chemicals that could degrade the material or adhesive.
  • Not a Guarantee: This device is a deterrent and not a substitute for safe driving practices. Always drive defensively and be aware of your surroundings, especially in areas with known wildlife.

10. Disposal & Recycling

To protect the environment, please dispose of this product responsibly.

  • Do not dispose of the product with general household waste.
  • Follow local environmental regulations for the disposal of plastic products. Contact your local waste management authority for information on recycling options.

11. Manufacturer Information

Manufacturer: Fuzhou Hanpin E-Commerce Co., Ltd.

Address: Floor 4, Hall2, Lijia Strait Commercial City, Tianshui North Road, Gaishan Town, Cangshan District, Fuzhou City, Fujian Province

For support or inquiries, please contact your retailer.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.