INQMEGA ST-WRP04-EU

Contents

INQMEGA 5MP Wifi Solar Camera Kit User Manual

Model: ST-WRP04-EU

1. Safety Information

⚠️ Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.

2. Product Overview

2.1. Camera Product Diagram

Diagram of the INQMEGA solar camera, labeling Antenna, PIR Sensor, Lens, Led Indicator, White & IR LEDs.
Figure 2.1: Camera Product Diagram showing key components like Antenna, PIR Sensor, Lens, LED Indicator, and White & IR LEDs.

2.2. Home Hub Product Diagram

Diagram of the Home Hub with dimensions and labeled ports: WiFi Antenna, Network port, Power port.
Figure 2.2: Home Hub Product Diagram with dimensions (14cm/5.511in height, 8cm/3.151in width) and labeled ports (WiFi Antenna, Network port, Power port).

2.3. Indicator Light Description (Home Hub)

  • Light keep on: connected well
  • Light flashing: signal not good
  • Light off: without connection

3. Setup Guide

3.1. Initial Battery Charge

Before initial use, fully charge the camera battery with a 5V/2A power supply for 6-8 hours.

3.2. App Registration

  1. Download the "UBoxPro" app by scanning the QR code provided in the manual or searching for "UBoxPro" in the App Store (iOS) or Google Play Store (Android).
  2. Open the app and input your E-mail address, then click "Register".
  3. Check and select to agree to the agreement. You will receive a verification code in your E-mail inbox.
  4. For a better user experience, allow all permissions to avoid missing notifications from the app.

3.3. Home Hub Connection

The Home Hub supports both wired and wireless connections. If you have already connected via a network cable, you can skip the wireless setup.

3.3.1. Wired Network Connection

  1. Connect the network cable to the Home Hub.
  2. Connect the power supply to the Home Hub.
  3. Open the "UBoxPro" app.
  4. In the app, select "Add device" and follow the prompts.
  5. Scan the QR code located on the Home Hub.
  6. Confirm device information and network connection.
  7. The relay station should connect successfully.

3.3.2. Wireless (Wi-Fi) Connection

  1. Connect the power supply to the Home Hub.
  2. Open the "UBoxPro" app.
  3. In the app, select "Add device" and follow the prompts.
  4. Scan the QR code located on the Home Hub.
  5. Confirm device information and network connection.
  6. Select "Use wireless relay".
  7. Go to your phone's Wi-Fi settings and connect to the device's Wi-Fi (named "URelay-XXXX").
  8. Return to the app, select your 2.4GHz or 5GHz Wi-Fi network, and enter the password.
  9. The relay station should connect successfully.
Video 3.1: Home Hub and Camera Setup Guide. This video demonstrates the steps for connecting the Home Hub via network cable or Wi-Fi, scanning the QR code, and pairing the cameras.

3.4. Camera Automatic Pairing

  1. Insert a TF card into the camera's card slot (metal chips facing up).
  2. Turn on all camera power switches. The camera will announce "The camera is now ready to begin pairing."
  3. Pull down the APP interface to refresh it. The cameras will be displayed successfully on the app.
Image of the camera with the TF card slot open, showing how to insert the TF card.
Figure 3.1: Inserting the TF Card into the camera.

3.5. Installation

You can choose the required installation method according to your environment.

Diagram showing multiple installation methods for the solar camera: Wall Mounting and Ceiling Hanging.
Figure 3.2: Multiple installation methods: Wall Mounting and Ceiling Hanging.
Diagram of the solar panel and its bracket.
Figure 3.3: Solar Panel and Bracket.

4. Operating Instructions

4.1. 5MP Super HD Videos & Live View

The camera provides 5MP Super HD resolution (2048x1536), delivering crystal-clear and smooth footage. It accurately records details in the monitoring area, ensuring no changes are missed.

Screenshot of 5MP Super HD video and live view on a smartphone, showing clear outdoor footage.
Figure 4.1: 5MP Super HD Video and Live View on a smartphone.

4.2. PIR Human Detection & Instant Alerts

The advanced PIR human detection feature reduces false alarms. When a moving object is detected, the camera wakes up, initiates automatic recording, and sends instant alarm notifications to your phone. The encrypted signal ensures your footage remains safe and private.

Illustration of PIR Human Detection showing a person being detected and an alarm notification on a smartphone.
Figure 4.2: PIR Human Detection and Alarm Notification.

4.3. Two-Way Audio

With a built-in microphone and speaker, the camera supports two-way audio, allowing you to easily talk to visitors, pets, or family members remotely through the app.

Illustration of Two-Way Audio feature, showing a user speaking through the camera to a delivery person.
Figure 4.3: Two-Way Audio in action.

4.4. PTZ Rotation Control

The camera offers Pan-Tilt-Zoom (PTZ) functionality, allowing it to be rotated 355° horizontally (pan) and 90° vertically (tilt). You can control these movements directly through the mobile application.

Diagram showing PTZ Rotation Control with 355° horizontal rotation and 90° vertical rotation.
Figure 4.4: PTZ Rotation Control.

4.5. Night Vision (Color & IR)

The camera features both white light and IR LED lights, providing switchable color night vision and infrared (IR) night vision modes for clear visibility in low-light conditions.

Comparison image showing Color Night Vision and IR Night Vision views on a smartphone screen.
Figure 4.5: Color and IR Night Vision comparison.

4.6. Solar Charging

The camera is equipped with a solar panel that continuously charges its built-in rechargeable battery in areas with sufficient sunlight, ensuring uninterrupted power supply.

Diagram illustrating solar energy features: fast absorption, high conversion, and fast charging.
Figure 4.6: Solar Energy Charging.

4.7. Extended WiFi Coverage

The Home Hub extends WiFi radiation distance in open areas up to 500 meters, providing stronger and wider Wi-Fi coverage for your cameras.

Diagram showing the Home Hub providing 500m WiFi signal distance to multiple cameras around a property.
Figure 4.7: WiFi Coverage of 500 Meters.

4.8. Home Hub Network Connection

The Home Hub supports network cable connection to provide strong and stable signals for the cameras, enhancing signal safety and reliability.

Diagram of the Home Hub connected via network cable, illustrating signal safety.
Figure 4.8: Home Hub Network Cable Connection.

4.9. 5db High-Gain Antenna

The 5db antenna enhances signal penetration, resulting in faster speeds, larger coverage, and a more stable network connection for your security system.

Diagram illustrating the 5db High-Gain Antenna enhancing signal penetration and coverage.
Figure 4.9: 5db High-Gain Antenna.

5. Maintenance

5.1. Battery Care

Ensure the camera's built-in rechargeable battery is kept charged, especially before initial use. The solar panel helps maintain charge, but a 5V/2A power supply can be used for full charging when needed.

5.2. Storage Management

The system supports both TF card and cloud storage. With loop recording, older videos are automatically overwritten to save space, ensuring continuous recording of the latest footage. Regularly check your storage to ensure important events are saved.

Diagram illustrating multiple storage methods: TF Card and Cloud Storage, with a smartphone showing recorded activity.
Figure 5.1: Multiple Storage Methods.

5.3. Weather Resistance

The cameras are IP66 waterproof and dustproof, designed to withstand various weather conditions including rain, snow, dust, and hot days. Regular cleaning of the lens and solar panel can help maintain optimal performance.

Illustration of IP66 Waterproof camera enduring rain, snow, dust, and hot weather.
Figure 5.2: IP66 Waterproof Feature.

6. Troubleshooting

  • Connection Issues: If the Home Hub indicator light is flashing, the signal might be poor. Ensure the hub is within range of your router and cameras. For wired connections, check the network cable. For wireless, ensure you've connected to the correct 2.4GHz/5GHz Wi-Fi and entered the password correctly.
  • Camera Not Pairing: Ensure all camera power switches are turned on. If the camera does not pair automatically, try pressing the Reset Button on the Home Hub for 3 seconds.
  • No Video/Poor Quality: Check the camera's power status and network connection. Ensure the lens is clean and free from obstructions.
  • No Apple Home Integration: This camera system does not support integration with Apple Home.
  • Monthly Fees: There are no monthly fees for using this system.

7. Specifications

FeatureSpecification
Brand NameINQMEGA
Model NumberST-WRP04-EU
OriginMainland China
CertificationCE, RoHS
Camera Image Resolution5MP Super HD (2560*1440P)
Lens (mm)2.8mm
Focal Length2.8mm
Viewing Angle360° (Pan 355°/Tilt 85°)
SensorCMOS
Sensor Size1/2.7"
Connectivity2.4G, WiFi (supports network cable for Home Hub)
Supported Mobile SystemsiOS, Android (UBoxPro App)
TechnologyINFRARed (IR Night Vision), White LED (Color Night Vision)
Alarm TypeLocal Alarm (PIR Human Detection, Alarm Notification)
Audio Output1CH BNC (Two-Way Audio)
Internal StorageUp to 128G (TF Card & Cloud Storage)
Power SupplyNormal (Solar Energy, Built-in Rechargeable Battery)
Waterproof LevelIP66
Home Hub Camera SupportUp to 4 camera connections
Home Hub Card RecordingUp to 128GB
Camera Power InputDC 5V/1A
NVR Power InputDC 5V/1A
Monthly FeeZero Fees Always free
Icons representing various features of the INQMEGA solar camera kit.
Figure 7.1: Key Features Overview.

8. User Tips

  • Initial Charge: Always fully charge the camera battery for 6-8 hours with a 5V/2A power supply before its first use to ensure optimal performance.
  • Power Adapter: The Home Hub does not ship with a power adapter. Ensure you source a DC 5V power adapter that complies with your local electrical standards.
  • Wi-Fi Compatibility: The system supports both 2.4GHz and 5GHz Wi-Fi networks.
  • Apple Home Integration: This system is not compatible with Apple Home.
  • No Subscription Fees: Enjoy all features without any monthly subscription fees.

9. Warranty and Support

9.1. Warranty Policy

A 1-year warranty is provided for all products, activated upon receipt. If the product is found to be defective within this period, it can be repaired or replaced. The warranty does not cover incidental, accidental, or indirect losses arising from customer use, nor losses caused by natural disasters.

Warranty claims are processed as follows:

  • Within 1 month of receipt: Free replacement.
  • 2-6 months after receipt: Customer pays shipping fee for warranty product.
  • 7-12 months after receipt: Customer pays 50% of the price of the warranty product.

9.2. Additional Resources

For further assistance, you can refer to the official user manual PDF: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.