Introduction
The LiitoKala Lii-S8 is an advanced 8-slot LCD battery charger designed for a wide range of rechargeable batteries. It features intelligent charging, quick charge capabilities, and multiple safety protections to ensure efficient and safe battery management. This manual provides detailed instructions for the proper use and maintenance of your Lii-S8 charger.

Important Safety Warnings
- This charger is designed exclusively for cylindrical Lithium-Ion (3.70V/3.80V), Lithium Iron Phosphate (LiFePO4-3.20V), NiMH/NiCd (1.20V), and prismatic 9V NiMH rechargeable batteries. Do not attempt to charge other battery types.
- Always refer to the battery's recommended charging current and never exceed it.
- Use only a 12.0V DC adapter with a power supply current of at least 4.0A.
- The charger may generate heat during operation. Keep it out of reach of children.
- Unplug the power supply and remove batteries when not in use.
- Operate the charger indoors at normal room temperature only.
- The test data provided by this product is for reference only. For precise measurements, consult professional instruments.
- ⚠️️ Please mind potential fire risk and strictly follow the instruction manual for charging and storage.
Key Features and Functions
- Input Power: DC 12.0V 4.0A (minimum) for stable operation.
- Intelligent Charging System: Microcomputer management system for each channel ensures optimal charging.
- Multi-Channel Fast Charging: Capable of simultaneously fast charging multiple channels at 2A current.
- 9V NiMH Battery Charging: Dedicated slots for charging 9V NiMH batteries.
- Adjustable Charging Currents: Five levels of charging current available: 0.30A, 0.50A, 0.70A, 1.00A, 2.00A.
- Automatic Current Configuration: For Li-ion and LiFePO4 batteries, the system automatically configures the current based on internal resistance.
- Fixed NiMH/NiCd Current: NiMH/NiCd batteries (1.20V) charge at a fixed 0.50A.
- LCD Display Screen: Provides real-time information including battery symbol, channel number (CH), battery type, charging current (A), battery voltage (V), charging time (h), capacity (mAh), energy percentage (%), and battery internal resistance (mΩ).
- LED Indicators: Red and green dual-color LED lights for each slot indicate charging status (red for charging, green for standby/full).
- Automatic Battery Identification: Automatically identifies Li-ion 3.70V and NiMH/NiCd (1.20V) batteries.
- 0V Activation Function: Can activate 0V batteries (trickle current activation for 1.65-2.20V batteries).
- Multiple Safety Protections: Includes overcharge, over-discharge, short-circuit, reverse connection protection, and bad battery identification.
- Charging Mode: Constant Current (CC) and Constant Voltage (CV).
Setup Instructions
- Connect Power: Plug the DC 12.0V 4.0A (minimum) adapter into the charger's DC input port and then into a power outlet. The LCD screen will display all segments for approximately 3 seconds, then show "null". The indicator lights for each channel will flash red, then green, then turn off. When "null" is displayed, the green light will remain on, indicating standby mode.
- Insert Batteries: Carefully insert your rechargeable batteries into the appropriate slots (CH1-CH8 for cylindrical batteries, dedicated slots for 9V NiMH batteries). Ensure correct polarity (+ and - terminals).
- Initial Battery Detection: Upon inserting a battery, the LCD will display the battery symbol, channel number, battery type, charging current, voltage, time, capacity, percentage, and internal resistance.

Operating Instructions
Button Functions
- MODE Button (Charging Mode):
- Within 9 seconds of inserting a battery, click the MODE button to select the battery type (Li-ion-3.70V, Li-ion-3.80V, LiFePO4-3.20V). NiMH/NiCd (1.20V) batteries are automatically detected and cannot be manually selected.
- During charging, long-press MODE to reselect the battery type. Note that previous charging data will not be saved.
- NEXT Button (Next Channel): This button cycles through channels 1 to 8, displaying charging data for each. Long-press to keep the LCD screen constantly lit; press again to return to normal.
- PREV Button (Previous Channel): This button cycles through channels 8 to 1, displaying charging data for each. Long-press to keep the LCD screen constantly lit; press again to return to normal.
- CURRENT Button (Current Adjustment):
- For Li-ion and LiFePO4 batteries, the system automatically configures the current. To change the current for a specific channel, first use NEXT or PREV to select the channel, then long-press CURRENT until the current value flashes. Short-press CURRENT to cycle through 0.30A, 0.50A, 0.70A, 1.00A, 2.00A.
- To set all active channels to the same current, while the battery type is flashing, long-press CURRENT, then short-press CURRENT to adjust.
- NiMH/NiCd (1.20V) batteries have a fixed charging current of 0.50A, which cannot be changed.
- The maximum charging current is 2.0A for slots #1/3/6/8, and 1.0A for slots #2/4/5/7. The total charging current between slots 1&2, 3&4, 5&6, and 7&8 will not exceed 2A. If one slot in a pair charges at 2A, the other will revert to 1A.
LCD Display and Indicators

- Initial Display: After power-on, the LCD shows all segments for ~3 seconds, then "null". Channel indicator lights flash red, then green, then off. In standby, the green light is constant.
- Charging Status: When a battery is detected, the LCD displays detailed information. After selecting the battery type and current (if applicable), the battery type will flash 7 times, and charging will begin after ~9 seconds. The battery symbol will show a cycling ladder, and the corresponding channel indicator will turn red.
- Querying Parameters: During charging, use NEXT or PREV to view parameters for different slots.
- LCD Backlight: If the LCD is dark, press any button to light it up. Long-pressing NEXT or PREV keeps the backlight on.
- Charging Completion: When charging is complete, the battery symbol will be full, the display shows 100%, charging parameters are saved, and the indicator light turns green.
Troubleshooting
- "Err" Display: If the battery or channel is abnormal (e.g., short circuit, reverse connection), the screen will display "Err" for the corresponding channel. The battery symbols for error channels will flash, and the corresponding indicator light will flash red as a warning.
- 9V NiMH Error: For 9V NiMH batteries, the screen display will not change during an error, but both indicator lights will be constant red.
- Bad Battery Identification: The charger is equipped to intelligently identify bad batteries. If a battery is deemed faulty, it will not charge, and an error may be displayed.
- Battery Not Charging (1.65-2.20V): Batteries within this voltage range cannot be charged normally, but the charger will attempt trickle current activation.
Technical Specifications
| Parameter | Specification |
|---|---|
| Input Power | DC 12.0V 4.0A (minimum) |
| Output Voltage (Li-ion) | DC 4.20V |
| Output Voltage (IMR) | DC 4.35V |
| Output Voltage (LiFePO4) | DC 3.65V |
| Output Voltage (NiMH/NiCd) | DC 1.48V |
| Output Voltage (9V NiMH) | DC 9.0V |
| Output Current (Li-ion/IMR/LiFePO4) | 2.00A*4 (slots #1/3/6/8 only), 0.30A/0.50A/0.70A/1.00A*8 |
| Output Current (NiMH/NiCd) | 0.50A*8 |
| Output Current (9V NiMH) | 85mA*2 |
| Charging Mode | Constant Current (CC) / Constant Voltage (CV) |
| Cutoff Current | 100mA |
| Standby Current (no load) | <50mA |
| Compatible Cylindrical Battery Sizes | 26650, 21700, 20700, 18650, 18490, 18350, 17670, 17500, 16340 (RCR123), 14500, 10440 (Li-ion/IMR/LiFePO4); AA, AAA, SC/C (NiMH/Cd) |
| Dimensions (L*W*H) | 195.0mm × 142.5mm × 35.0mm |
| Weight | 800g (excluding data cable) |
User Tips
- For optimal charging speed, utilize the 2A slots (1, 3, 6, 8) when charging single batteries or pairs that don't exceed the 2A total current limit for their group.
- Always double-check battery polarity before inserting to prevent errors and potential damage.
- If you need to monitor charging progress for an extended period, use the long-press function on the NEXT or PREV buttons to keep the LCD backlight on.
- Keep the charger clean and free from dust to ensure proper ventilation and prevent overheating.
Warranty and Support
LiitoKala products are manufactured to high-quality standards. For any issues or support inquiries, please refer to the official LiitoKala website or contact your retailer. Keep your purchase receipt as proof of purchase for warranty claims.
For further details and documents, you may refer to the User Manual (PDF).