1. Product Overview
The Bosch GDR 18V-215 is a cordless brushless impact driver designed for driving in and loosening screws and bolts, as well as for tightening and loosening nuts within its specified dimension range. It features a compact and light design with an ergonomic handle, making it ideal for various professional tasks.

1.1. Product Features
- Brushless Motor: Provides maximum speed of 3300rpm and max torque of 215Nm.
- 2-Speed Gears: Allows for speed selection suitable for different tasks.
- Auto-Stop Mode: Automatically stops after tightening screws or nuts in forward rotation mode, preventing over-tightening.
- Forward and Reverse Rotation: For driving in and loosening fasteners.
- Compact and Light Design: Features an ergonomic handle for comfortable use.
- Worklight: Illuminates the work area in poor lighting conditions.
- Belt Clip: For convenient carrying and quick access to the tool.

1.2. Components
The numbering of the product features refers to the diagrams on pages 3 and 5 of the original manual.
- Tool holder
- Locking sleeve
- Worklight
- Rotational direction switch
- Belt clip
- Rechargeable battery (accessory, not part of standard scope of delivery)
- Battery release button (accessory, not part of standard scope of delivery)
- User interface
- On/off switch
- Handle (insulated gripping surface)
- Screwdriver bit with ball catch (accessory, not part of standard scope of delivery)
- Universal bit holder (accessory, not part of standard scope of delivery)
- Screwdriver bit (accessory, not part of standard scope of delivery)
1.3. User Interface
The user interface (8) is used to preselect the speed and working mode.
- Speed button (15)
- Speed preselection indicator (16)
- Auto Slow-down mode indicator (wood) (17)
- Auto Shut-off mode indicator (metal) (18)
- Function button (20)

2. Safety Instructions
Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions may result in electric shock, fire, and/or serious injury. Save all warnings and instructions for future reference.
2.1. General Power Tool Safety Warnings
- Work Area Safety: Keep work area clean and well lit. Do not operate power tools in explosive atmospheres. Keep children and bystanders away.
- Electrical Safety: Power tool plugs must match the outlet. Avoid body contact with earthed or grounded surfaces. Do not expose power tools to rain or wet conditions. Do not abuse the cord. Use an extension cord suitable for outdoor use when operating outdoors.
- Personal Safety: Stay alert and use common sense. Do not operate while tired or under the influence. Use personal protective equipment, including eye protection. Prevent unintentional starting. Remove adjusting keys or wrenches before turning the power tool on. Do not overreach. Dress properly. If dust extraction facilities are provided, ensure they are connected and properly used.
- Power Tool Use and Care: Do not force the power tool. Use the correct power tool for your application. Do not use the power tool if the switch does not turn it on and off. Disconnect from power source before making adjustments or storing. Store idle power tools out of reach of children. Maintain power tools and accessories.
2.2. Battery Tool Use and Care
- Recharge only with the charger specified by the manufacturer.
- Use power tools only with specifically designated battery packs.
- When the battery pack is not in use, keep it away from other metal objects that could make a connection between terminals.
- Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water and seek medical help if liquid contacts eyes.
- Do not use a battery pack or tool that is damaged or modified.
- Do not expose a battery pack or tool to fire or excessive temperature.
- Follow all charging instructions and do not charge the battery pack or tool outside the specified temperature range.
2.3. Safety Warnings for Impact Wrenches
- Hold the power tool by insulated gripping surfaces when performing an operation where the fastener may contact hidden wiring.
- Use suitable detectors to determine if there are hidden supply lines or contact the local utility company for assistance.
- Only use impact-resistant bits and sockets as application tools.
- Hold the power tool securely.
- Secure the workpiece.
- Always wait until the power tool has come to a complete stop before placing it down.
- Do not modify or open the battery.
- The battery can be damaged by pointed objects such as nails or screwdrivers or by force applied externally.
- Only use the battery in the manufacturer's products.
- Protect the battery against heat, e.g., against continuous intense sunlight, fire, dirt, water, and moisture.
2.4. Symbols
The following symbol indicates that tool data logging is enabled in this tool: D
3. Setup
3.1. Battery Installation and Charging
The GDR 18V-215 operates with an 18V rechargeable battery (not included in all sets). Ensure you use only Bosch GBA 18V or ProCORE18V batteries and compatible chargers.

3.1.1. Charging the Battery
- Use only the chargers listed in the technical data.
- Lithium-ion rechargeable batteries are supplied partially charged. Fully charge the battery before first use.
3.1.2. Inserting the Battery
Push the charged battery into the battery holder until it clicks into place.
3.1.3. Removing the Battery
To remove the rechargeable battery, press the battery release button and pull the battery out. Do not use force.
3.1.4. Battery Charge Indicator
The green LEDs on the battery charge indicator indicate the state of charge. Press the button to show the state of charge. If no LED lights up, the battery is defective and must be replaced.
3.1.5. Recommendations for Optimal Battery Handling
- Protect the battery against moisture and water.
- Store the battery within a temperature range of -20 to +50 °C.
- Clean the ventilation slots on the battery occasionally.
3.2. Inserting the Application Tool
Before carrying out any work on the power tool, remove the battery.

- Pull the locking sleeve (2) forward, guide the application tool (1) into the tool holder up to the stop, and release the locking sleeve (2) to lock the application tool.
- Screwdriver bits (13) can be inserted using a universal bit holder with ball catch (12).
3.3. Belt Clip
The belt clip (5) allows you to hang the power tool on a belt, keeping your hands free and the tool always at hand.
4. Operation
4.1. Operating Principle
The tool holder (1) (with the application tool) is driven by an electric motor via a gear and impact mechanism. The working procedure is divided into two phases: screwing in and tightening (impact mechanism in action). The impact mechanism is activated as soon as the screwed connection runs tight and load is put on the motor. The impact mechanism then converts the power of the motor to steady rotary impacts. When loosening screws or nuts, the process is reversed.
4.2. Setting the Rotational Direction

- The rotational direction switch (4) is used to change the rotational direction. This is not possible while the on/off switch (9) is being pressed.
- Right Rotation: To drive in screws and tighten nuts, press the rotational direction switch (4) through to the left stop.
- Left Rotation: To loosen and unscrew screws and nuts, press the rotational direction switch (4) through to the right stop.
4.3. Adjusting the Speed/Impact Rate
- You can adjust the speed/impact rate of the power tool when it is on by pressing the on/off switch (9) to varying extents.
- Applying light pressure results in a low rotational speed/impact rate. Increasing pressure increases the speed/impact rate.
4.4. Switching On/Off
- To start the power tool, press and hold the on/off switch (9).
- The worklight (3) lights up when the on/off switch (9) is lightly or fully pressed.
- To switch off the power tool, release the on/off switch (9). The worklight (3) will remain lit for approx. 15 seconds.
4.5. Predefined Working Modes
The GDR 18V-215 has two preset working modes: Auto Slow-down (wood) and Auto Shut-off (metal). To switch between modes, press the function button (20).

- Auto Shut-off (metal): The power tool automatically stops as soon as the torque increases and the impact function is started. This prevents over-tightening.
- Auto Slow-down (wood): The power tool reduces speed when tightening (impact mechanism in action). This prevents over-tightening by giving the user time to release the switch.
4.6. Practical Advice
- The torque depends on the impact duration. Maximum torque is achieved after an impact duration of 6–10 seconds.
- Always check the tightening torque with a torque wrench.
- For hard materials, pre-drill a pilot hole with the core diameter of the thread to approx. 2/3 of the screw length.
- Ensure no metal particles enter the power tool.
- After working at a low speed for an extended period, operate the power tool at maximum speed for approx. three minutes without load to cool it down.
5. Maintenance
5.1. Maintenance and Cleaning
- Clean the air vents on your power tool regularly to prevent electrical hazards from excessive accumulation of powdered metal.
- Clean the tool holder (1) and locking sleeve (2) from time to time.
- Before carrying out any work on the power tool, remove the battery.
- Always keep the power tool and ventilation slots clean for safe and efficient operation.
6. Troubleshooting
- Tool not turning on: Ensure the battery is properly inserted and charged. Check the battery charge indicator.
- Reduced operating time: If the battery's operating time is significantly reduced after charging, the battery has deteriorated and must be replaced.
- Over-tightening/Under-tightening: Adjust the speed/impact rate and use the appropriate working mode (Auto Shut-off for metal, Auto Slow-down for wood). Always check the achieved torque with a torque wrench.
- Application tool not holding securely: Ensure the application tool is held securely in the tool holder.
7. Specifications
| Parameter | GDR 18V-215 |
|---|---|
| Brushless Motor | Yes |
| Max. Torque | 215 N·m |
| No-Load Speed (Gear 1) | 0 - 2100 rpm |
| No-Load Speed (Gear 2) | 0 - 3300 rpm |
| Impact Rate (Gear 1) | 0 - 3000 ipm |
| Impact Rate (Gear 2) | 0 - 3800 ipm |
| Head Length | 126 mm |
| Operating Mode | Auto Mode (Metal/Wood) |
| Rated Voltage | 18 V |
| Chuck Type | 1/4" Hex Shank |
| Bolt Diameter | M6 - M16 |
| Dimensions (LxWxH) | 126×77×210 mm |
| Weight (excl. battery) | 1.1 kg |

8. User Tips
- When screwing larger, longer screws into hard materials, it is advisable to pre-drill a pilot hole with the core diameter of the thread to approximately 2/3 of the screw length.
- Always check the tightening torque with a torque wrench to ensure accuracy, especially for critical applications.
- For delicate tasks, use Gear 1 (0-2100 rpm). For high-efficiency operations, use Gear 2 (0-3300 rpm).
- If the tool is used for an extended period at low speed, operate it at maximum speed without load for about 3 minutes to cool it down.
9. Frequently Asked Questions
- Q: What is the purpose of the Auto-Stop mode?
- A: The Auto-Stop mode (Metalworking/Woodworking) automatically stops the machine after tightening screws or nuts in forward rotation mode. This prevents over-tightening and potential damage to the fastener or workpiece.
- Q: Can I use any 18V battery with this impact driver?
- A: It is recommended to use only Bosch GBA 18V or ProCORE18V batteries with this tool to ensure optimal performance and safety. Using other battery types may pose risks.
- Q: How do I know when the battery needs charging?
- A: The battery charge indicator, consisting of green LEDs, shows the state of charge. If no LEDs light up when the button is pressed, the battery is defective and needs to be replaced.
10. Warranty and Support
For after-sales service, maintenance, repair, and spare parts, please refer to the official Bosch Power Tools website or contact your local Bosch service center. Always include the 10-digit article number of your product when making inquiries or ordering spare parts.
An official user manual (PDF) is available for download: View User Manual (PDF)