1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Leeocar Android Touch Screen Car Radio, specifically designed for Toyota Camry models from 2007 to 2011. This multimedia head unit enhances your driving experience with features like WiFi connectivity, GPS navigation, wireless Apple CarPlay, and Android Auto.
2. Important Safety Warnings
- JBL/BOSS/BOSE Amplifier Incompatibility: This unit cannot be installed in original cars equipped with JBL, BOSS, or BOSE amplifier systems. Hybrid, SE, and models with JBL sound systems require an additional Canbus decoder and special cable to function correctly.
- Wiring Caution: Always disconnect the vehicle's battery before performing any wiring connections. Connecting wiring while power is on may result in system errors, fuse damage, or permanent malfunction.
- CANBUS Box: The CANBUS box is pre-connected to the wiring harness. Do not disconnect the CANBUS connector, as this may disable certain functions.
- Professional Installation Recommended: For optimal performance and to avoid damage, professional installation is strongly recommended.
3. Package Contents
Please verify that all items listed below are included in your package. If any accessories are missing, please contact customer service.
Figure 1: Package contents and rear panel wiring diagram.
- 1 x Car MP5 Player (Head Unit)
- 1 x Power Cable
- 1 x GPS Antenna
- 1 x Backup Camera
- 1 x Rear Camera Input Cable
- 1 x RCA Cable
- 2 x USB Cables (4-pin and 6-pin)
- 1 x Crowbar (for installation)
- 1 x Instruction Manual
- 1 x Reversing Line
- 1 x GPS Module
- 1 x OEM Radio Antenna
- Free Gift (mounting screws/clips)
- 1 x Microphone
4. Installation Guide
Before beginning installation, ensure the vehicle's battery is disconnected. Refer to Figure 1 for a visual guide to the components and wiring.
4.1. General Installation Notes
- If your vehicle has a JBL audio system, use the specific XC-1637 harness.
- Connect only the plugs labeled for your original car radio. Unused plugs do not need to be connected.
- Some models may require minor wiring adjustments due to differing harness layouts. If the radio does not power on, contact support for guidance.
4.2. Wiring Harness Connection Tutorial
Carefully connect the power cable, RCA cable, USB cables, CAM-IN wire, radio antenna, and GPS antenna according to the rear panel pinout diagram shown in Figure 1. Ensure all connections are secure.
4.3. Steering Wheel Controls Setup
Figure 2: Steering Wheel Control setup interface.
- Go to Car Settings Factory (password:
000000). - Navigate to CarType Setting and select "NO Canbus".
- Return to Car Settings General and select SWC Type, then choose "Learning Type".
- Tap "Enter SWC setting interface" and follow the on-screen instructions to program your steering wheel control keys.
4.4. Rear Camera Wiring Tutorial
Connect the reversing line from the backup camera to the designated input on the head unit. The rear image will automatically display when the vehicle is in reverse. Note that wire colors may vary between batches, but pin locations remain consistent.
For a visual guide, scan the QR code provided in the original manual (page 2) for a tutorial video.
5. Operating Instructions
5.1. Wireless Apple CarPlay & Android Auto
Figure 3: Wireless Apple CarPlay and Android Auto interfaces.
The unit supports wireless Apple CarPlay and Android Auto, allowing seamless integration with your smartphone for navigation, calls, messages, and music. Voice control (Siri/Google Assistant) is also supported.
Connection via Zlink:
- Ensure Wi-Fi and Bluetooth are enabled on your phone.
- On the car radio, open the Bluetooth Phone app and search for your phone's Bluetooth device name. The default PIN is
0000. - On your phone, go to Bluetooth settings, find the radio's Bluetooth device name, enter
0000, and complete the pairing. - For iPhone: Tap Use CarPlay when prompted and set the device type as Car Stereo.
- For Android: Ensure Location services are enabled on your phone and that it supports wireless Android Auto (Android 11 or above is recommended).
- Open the ZLINK app on the car radio. CarPlay or Android Auto should launch automatically.
5.2. Mirror Link
Mirror Link allows you to display your phone's screen directly on the car radio. This feature can be used via hotspot or USB cable to access your phone's navigation, music, and other applications.
Connection via Zlink:
For iOS (Wireless Mirroring):
- Open the ZLINK app on the car stereo and select "Wireless Mirroring".
- Enable your phone's cellular data and personal hotspot, and allow others to join.
- Connect the car stereo's WiFi to your phone's personal hotspot.
- Swipe down from the top of your phone screen to access the control center, tap "Screen Mirroring", and select "zj-airplay" to pair and complete the wireless mirroring connection.
For iOS (Wired Mirroring):
- Open the Zlink app and switch to mirror function.
- Use the included 4-pin/6-pin USB cable to connect your phone to establish a connection, and follow the on-screen instructions.
For Android (Wireless Mirroring):
- On your phone, go to Bluetooth settings, locate the radio's Bluetooth device name, enter the PIN code:
0000, and complete the pairing. - Open the ZLINK app on the radio and select "Wireless Mirroring".
- Scan the QR code to download the "zPlus" app.
- Enable your phone's hotspot and connect the radio's WiFi to the phone hotspot.
- Open the "zPlus" app on your phone, select the connection method "Wireless Connection" to start mirroring and screen casting.
For Android (Wired Mirroring):
- On your phone, go to Bluetooth settings, locate the radio's Bluetooth device name, enter the PIN code:
0000, and complete the pairing. - Open the ZLINK app on the radio and switch to wired mirroring mode.
- Use the 4Pin/6Pin USB cable provided to connect the USB data cable to your phone.
- Open the "zPlus" app on your phone and select the connection method "USB Connection" to establish the connection. The "zPlus" app should launch automatically.
5.3. WiFi Connection
When connected to a WiFi network or mobile hotspot, the Android head unit allows you to download and use various applications like YouTube, Spotify, and Pandora. You can also watch online videos, use online map navigation, or browse the internet.
5.4. GPS Navigation
The unit features built-in GPS navigation. You can use offline GPS navigation by downloading maps to the unit's internal storage via a WiFi connection. Online maps are also accessible when connected to WiFi. The system is compatible with most navigation apps from the Play Store, such as Sygic, Waze, and Navitel IGO.
GPS Antenna Installation:
Install the GPS antenna on the A-pillar of your car or just outside the dash for optimal signal reception. The GPS function will not work correctly if the antenna is installed inside the dash.
5.5. FM Radio Receivers
Enjoy high-quality FM radio with unlimited preset stations. The radio supports automatic or manual station searching and provides access to music, traffic information, and weather forecasts. The FM range is 87.5~108MHz.
5.6. Bluetooth Handsfree Calls
The Bluetooth function enables safe hands-free calling while driving. You can answer calls, access phonebooks, and synchronize contacts directly from the unit. It also supports Bluetooth music streaming for wireless audio playback.
5.7. Touch Screen Interface
Figure 4: Full HD 1280*800 IPS Screen with wide viewing angle.
The 9-inch high-definition IPS touch screen provides a clear and vibrant visual experience with rich colors and a wide 178° viewing angle, enhancing your interaction with the multimedia system.
5.8. Steering Wheel Control
Figure 5: Steering Wheel Control in use.
Once configured (see Section 4.3), the steering wheel controls allow convenient operation of functions such as switching songs, managing hands-free calls, and adjusting volume, minimizing distractions while driving.
5.9. Dynamic Sound Settings
Figure 6: Dynamic Sound Equalizer and Effects.
The unit offers adjustable sound fields, effects, and surround sound options. You can fine-tune the equalizer to make the bass fuller, the treble smoother, and the midrange richer, customizing your audio experience.
5.10. System Update
Figure 7: System Update Download Instructions and Forced Upgrade.
Figure 8: OTA Upgrade Method interface.
Download Instructions:
- Tap "Check for Updates". The system will compare your current firmware version with the server.
- If a newer version is available, the "Download Update" button will become active. Tap it to start downloading.
- The download progress bar, file size, speed, and estimated remaining time will be displayed.
Forced Upgrade Feature (for system crashes/freezes):
- After tapping "Check for Updates" and receiving the message "No update needed," tap the "Download Update" button ten times consecutively.
- A password input prompt will appear. Enter the correct password to proceed. This mechanism prevents misuse of the download function.
OTA Upgrade Method:
- Tap "Check for Updates".
- If a new version is found, tap the "Download Update" button.
- The device will automatically unzip and reboot to start the upgrade process.
- After the upgrade, the head unit will reboot again automatically.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the screen and unit. Avoid abrasive cleaners or solvents.
- Software Updates: Regularly check for and install system updates to ensure optimal performance and access to new features (refer to Section 5.10).
- Avoid Extreme Temperatures: Do not expose the unit to extreme heat or cold, as this can affect its lifespan and performance.
7. Troubleshooting (FAQ)
- Q: What is the factory password?
- A: The factory password is
000000. - Q: The rear camera image is reversed (left to right). How can I fix it?
- A: Go to Car Settings → General and toggle the "Rear Mirror" option to adjust.
- Q: Why is the factory rear camera image not clear?
- A: Older factory cameras often use CVBS (360P) signals, while this new radio supports AHD (1080P). We recommend using the supplied backup camera for better image quality.
- Q: How do I turn off the camera's guideline?
- A: Go to Car Settings → General and turn off "Reverse Line".
- Q: What should I do if the radio experiences issues like freezing and stuttering?
- A: Go to Settings → System → Reset options → Erase all data (factory reset).
- Q: Is it possible to support Sirius XM radio?
- A: The radio does not have a dedicated port for SiriusXM. You may check the Play Store for compatible third-party apps, but compatibility is not guaranteed.
- Q: Does it support the factory microphone?
- A: The factory microphone cannot be retained. Connect an external microphone to the 3.5mm port on the RCA cable. For best results, install the microphone on the driver's side sun visor, facing the driver.
- Q: Can I use a voice assistant (Siri, etc.)?
- A: Voice assistants are activated through your phone. Connect your phone to the radio via Bluetooth, Android Auto, or CarPlay to use the voice assistant feature.
- Q: Why is the time not accurate?
- A: Ensure your GPS antenna is properly connected (on the A-pillar or outside the dash). Connect your radio to Wi-Fi or a hotspot. Then go to Settings → System → Date and Time, and enable "Use network provided time" and "Use network-provided time zone".
- Q: Why is the WiFi connection unstable?
- A: Verify that the single yellow RCA camera port is properly connected to the radio, as the adjacent small wires are intended for receiving Wi-Fi and Bluetooth signals. Note that Bluetooth and WiFi cannot be used simultaneously.
- Q: What should I do if the original car protocol-related information display or settings show errors?
- A: Select the corresponding car model according to the provided car model protocol selection chart. Connect the car radio to the internet, then go to Car settings → System → CAN Apk Update to complete the upgrade.
- Q: How do I change the custom boot logo/startup logo?
- A: Download your desired image (resolution 1280x720, PNG format), rename it to
zxdzlogo, and place it in the root directory of a USB drive. Insert the USB drive into the device. Go to Settings → System → About device → Local Update → select the logo and start the upgrade. After the upgrade, go to Car Settings Factory (password000000) → Dedicated logo settings → Boot Screen Logo to change the logo. - Q: How do I use the offline map, navigation, and GPS functions?
- A: First, install the GPS antenna on the A-pillar or outside the dash. For GPS navigation, connect your radio to Wi-Fi or a hotspot to use online navigation. For offline navigation, connect to Wi-Fi first to download maps to the radio's internal storage. Once downloaded, you can use the maps without an internet connection. Alternatively, you can connect via CarPlay or Android Auto to use GPS/navigation.
8. Specifications
| Feature | Specification |
|---|---|
| Warranty | 1 year |
| Preset Station | Set by yourself |
| Tuner Type | Support FM, AM(Optional) |
| Built-in DVD Player | No |
| Built-in CD player | No |
| Is touch screen | Yes |
| Built-in Screen | Yes |
| Category | Combination product |
| TF/Micro SD Slot | 2 |
| Din | Double Din |
| RAM | 4G |
| Interface | USB/RCA |
| Operating System | Android 13 |
| Out Power | 4*45W |
| Voltage | 12 V |
| Item Weight | 2.5kg |
| Output Type | Colored |
| Max External Memory | 64G |
| Special Features | WiFi function, Support 4G Network, Built-in GPS, Split Screen, MP3 players, CarPlay, Voice Control, Android Auto, DSP, Reversing Input, Support steering wheel control, Support Can-Bus |
| Digital Media Format | MP4, Mp3, WMA, JPEG |
| OSD Language | Chinese (Simplified), Chinese (Traditional), Albanian, Arabic, Azeri, Irish, Estonian, Belarusian, Bulgarian, Icelandic, Polish, Persian, Boolean text (Dutch South Africa), Danish, German, Russian, French, Filipino, Finnish, Georgian, Haitian Creole, Korean, Dutch, Galicia, Catalan, Czech, Croatian, Latin, Latvian, Lithuanian, Romanian, Maltese, Malay, Macedonian, Norwegian, Portuguese, Japanese, Swedish, Serbian, Slovak, Slovenian, Swahili, Thai, Turkish, Welsh, Ukrainian, Hebrew, Greek, Spain's Basque, Spanish, Hungarian, Armenian, Italian, Yiddish, Hindi, Urdu India, Indonesia, English, Vietnamese |
| Display Size | 9" |
| Origin | Mainland China |
| ROM | 64G |
| Certification | CE, FCC, WEEE, EAC, RoHS, KC |
| Material | Composite Material |
| Online Radio | Search multiple channel (Optional) |
| Support Wireless Android Auto/ CarPlay | Sync phone to Radio (Optional) |
| GPS navigation map | Built-in offline map, free update |
| AV-OUT | Need converter |
| Support AI voice control | Allow you to make phone calls, navigate, play music... (Optional) |
9. User Tips
- For optimal GPS performance, install the GPS antenna on the A-pillar of your car or just outside the dash. Avoid installing it inside the dashboard.
- To achieve the best rear camera image quality, use the supplied backup camera, as it is optimized for the radio's AHD (1080P) display.
- When installing an external microphone, place it on the driver's side sun visor with the microphone head facing the driver for clearer voice pickup.
10. Warranty and Technical Support
10.1. Warranty Information
This product comes with a 1-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
10.2. Technical Support
For any issues not covered in this manual or for further technical assistance, please refer to the official website for after-sales support. You can also use the forum on the website to ask questions or report any issues.
A comprehensive user manual is available in PDF format for detailed guidance. You can access it at: Leeocar Android Car Radio User Manual (PDF)
If you have questions about the item after purchase, please contact customer service before initiating a return. We are committed to resolving any problems you may encounter.