1. Product Overview
The Vertical Mouse Laser Level is a compact and versatile leveling tool designed for various applications, from home DIY projects to professional construction tasks. It projects precise horizontal and vertical laser lines, including a 90-degree right angle, and features dual bubble levels for accurate calibration. Its infrared laser offers a projection distance of up to 20 meters, making it suitable for a wide range of leveling and alignment needs.

Figure 1: Vertical Mouse Laser Level
Product Features:
- Dual-line cross projection (horizontal and vertical)
- 90-degree right angle laser projection
- High-precision horizontal and vertical bubble levels
- Compact and portable design
- Up to 20 meters projection distance
- Simple one-button operation
2. Setup and Preparation
2.1. Battery Installation
The device requires 2 AA batteries (not included). To install:
- Locate the battery compartment on the underside of the laser level.
- Open the battery compartment cover.
- Insert two AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Close the battery compartment cover securely.

Figure 2: Battery Compartment Location
2.2. Device Placement and Calibration
For accurate measurements, proper placement and calibration are essential:
- Surface Placement: Place the laser level on a flat, stable surface to avoid shaking. For precise measurements, using a tripod or a stable platform (like a table or a wall corner) is recommended for height adjustment.
- Level Calibration: Observe the liquid levels in the two bubble tubes on the device.
- The horizontal bubble should be centered within its scale line.
- The vertical bubble should be centered within its scale line.

Figure 3: Bubble Levels for Calibration
3. Operating Instructions
3.1. Turning On/Off
- To Turn On: Press the top switch button once. A red laser line will be projected from the front. The laser line will appear as a horizontal line and a vertical line, with their intersection point serving as the reference origin.
- To Turn Off: Press the top switch button again to turn off the laser and conserve battery power.

Figure 4: Power Button and Controls
3.2. Laser Projection Modes
The laser level can project horizontal, vertical, or both lines simultaneously, including a 90-degree right angle. Use the adjustment knob (if present, or repeated presses of the main button depending on model) to switch between projection modes as needed.

Figure 5: Horizontal and Vertical Laser Projection

Figure 6: 90-Degree Right Angle Laser Projection
3.3. Projection and Marking
Once the laser is on and calibrated, shine the laser onto the desired surface (wall, floor, ceiling). Use a pencil or marker to mark along the light path. This can be used for:
- Wall leveling and hanging pictures
- Floor and tile laying
- Door and window positioning
- Installing shelves and baseboards
- Furniture assembly and decoration

Figure 7: Multi-Scenario Applications

Figure 8: Diverse Usage Examples
Video 1: Demonstration of Laser Level in Use
This video demonstrates the laser level's functionality, including its ability to project horizontal, vertical, and 90-degree lines for various tasks like wall mounting, floor leveling, and picture hanging.
4. Maintenance and Care
- Cleaning: Use a dry, soft cloth to wipe the surface of the casing to remove dust. Do not use abrasive cleaners or solvents.
- Avoid Water: Do not wash or soak the device in water.
- Storage: Store the laser level in a dry and well-ventilated place, away from direct sunlight and extreme temperatures.
- Battery Check: It is recommended to check the battery level after each use to prevent sudden power failure during future tasks.
5. Troubleshooting
- Laser Line Deviation: If you notice that the projected laser line is not accurate or deviates, please recalibrate the bubble levels as described in Section 2.2. Ensure the device is on a stable, flat surface.
- No Laser Projection:
- Check if the batteries are correctly installed and have sufficient charge. Replace with new AA batteries if necessary.
- Ensure the power button has been pressed firmly.
- Faint Laser Line: In bright light conditions, the laser line may appear faint. It is recommended to use the device in dimmer environments or against a white or light-colored background to enhance visibility.
6. Specifications
| Feature | Detail |
|---|---|
| Type | Vertical & Horizontal Lasers |
| Measurement Model | 2 lines |
| Laser Color | Red |
| Projection Distance | Up to 20 meters |
| Power Source | 2 x AA Batteries (not included) |
| Origin | Mainland China |
| Package Length | 20 cm |
| Package Width | 15 cm |
| Package Height | 5 cm |
| Package Weight | 0.09 kg |
7. User Tips
- Enhance Visibility: When working in bright conditions, project the laser onto a white or light-colored surface for better visibility. Using a laser target plate can also help.
- Stable Setup: Always ensure the laser level is placed on a perfectly stable surface or tripod to prevent movement and ensure accuracy.
- Battery Life: For continuous long-term work, it is recommended to have a backup set of batteries.
- Safety First: Never stare directly into the laser beam, as it can cause eye damage.
8. Warranty and Support
Specific warranty information for this product is not provided in the available documentation. For any warranty claims, technical support, or product inquiries, please contact the seller directly through your purchase platform.
For additional information, you may refer to the original user manual PDF: View User Manual (PDF)