Aula F99

Contents

Aula F99 Gaming Mechanical Keyboard User Manual

Your guide to setting up, operating, and maintaining your Aula F99 keyboard.

1. Product Overview

The Aula F99 is a high-performance gaming mechanical keyboard designed for versatility and customization. It features a 99-key layout, tri-mode connectivity (2.4G Wireless, Bluetooth 5.0, and Type-C Wired), hot-swappable switches, PBT keycaps, and dynamic RGB lighting. Its gasket structure and five-layer sound dampening provide a comfortable and quiet typing experience.

Aula F99 Customized Mechanical Keyboard - Gasket structure, RGB, Hot-swap
Figure 1: Aula F99 Customized Mechanical Keyboard highlighting Gasket structure, RGB, and Hot-swap features.

2. Package Contents

Please check the package for the following items:

  • Aula F99 Mechanical Keyboard
  • USB Type-C Cable
  • 2.4G Wireless Receiver
  • Keycap Puller (if included)
  • Switch Puller (if included)
  • User Manual (this document)

3. Setup Guide

3.1. Charging the Keyboard

The Aula F99 keyboard is equipped with an 8000mAh Lithium Battery. Before first use, or if the battery is low, connect the keyboard to a USB power source using the provided Type-C cable. The charging indicator (if present) will show the charging status.

8000 Milliampere Lithium Battery
Figure 2: The Aula F99 keyboard features an 8000mAh Lithium Battery for extended wireless use.

3.2. Connection Modes

The Aula F99 supports three connection modes: Bluetooth 5.0, 2.4G Wireless, and Type-C Wired. A switch on the side of the keyboard allows you to select your preferred mode.

Three-mode connection: Bluetooth 5.0, 2.4G Wireless, Type-C Wired
Figure 3: Diagram illustrating the three connection methods: Bluetooth 5.0, 2.4G Wireless, and Type-C Wired.
Keyboard side view showing USB receiver slot, BT/Wired/2.4G switch, and Type-C port.
Figure 4: Side view of the keyboard showing the USB receiver storage slot, the mode selection switch (BT/Wired/2.4G), and the Type-C port.

3.2.1. 2.4G Wireless Connection

  1. Locate the 2.4G USB receiver, usually stored in a dedicated slot on the keyboard.
  2. Plug the USB receiver into an available USB port on your computer.
  3. Slide the mode switch on the keyboard to the '2.4G' position.
  4. The keyboard should automatically connect. If not, press the pairing button (refer to the official PDF manual for exact key combination if needed).

3.2.2. Bluetooth 5.0 Connection

  1. Slide the mode switch on the keyboard to the 'BT' (Bluetooth) position.
  2. On your computer or device, enable Bluetooth and search for new devices.
  3. Select 'Aula F99' (or similar name) from the list of available devices to pair.
  4. Follow any on-screen prompts to complete the pairing process.

3.2.3. Type-C Wired Connection

  1. Connect one end of the provided Type-C cable to the keyboard's Type-C port.
  2. Connect the other end of the cable to an available USB port on your computer.
  3. Slide the mode switch on the keyboard to the 'Wired' position.
  4. The keyboard will be recognized as a standard USB keyboard and is ready for use.

3.3. Driver Installation (Optional)

For advanced customization, including macro settings and detailed RGB lighting control, it is recommended to install the official Aula F99 driver software. Please visit the manufacturer's website to download the latest version.

Macro Driver Settings for Custom Keys & Lights
Figure 5: Screenshot of the Macro Driver Settings interface, allowing customization of keys and RGB lighting effects.

4. Operating Instructions

4.1. Basic Keyboard Functions

The Aula F99 features a standard 99-key English layout. All keys function as expected in their respective positions. Special function keys (F1-F12) may have secondary functions accessible via the 'Fn' key (e.g., media control, volume adjustment).

4.2. RGB Lighting Control

The keyboard features customizable RGB lighting. You can cycle through various lighting effects and colors using onboard shortcuts (often Fn + specific keys like arrow keys or Ins/Del/Home/End/PgUp/PgDn) or through the dedicated driver software for more granular control.

Close-up of keyboard keys with RGB lighting, demonstrating color change.
Figure 6: Close-up view of the keyboard keys showcasing the customizable RGB lighting in action.

4.3. Hot-Swappable Switches

The Aula F99 features hot-swappable switches, allowing you to easily change mechanical switches without soldering. This enables customization of typing feel and sound.

Exploded view of a single key showing hot-swappable switch.
Figure 7: Exploded view of a single key demonstrating the hot-swappable switch mechanism.

The keyboard supports various switch types, including:

  • LEOBOG Purple Emperor Axis (Linear axis nylon + POM light guide column)
  • LEOBOG Smart axis V3 (Linear axis full pom, smooth double, factory lubrication)
  • LEOBOG Reaper shaft axis (Linear Axis, light guide column, bottom shell nylon, top shell PC, shaft core POM)
  • TTC FLAME PURPLE AXIS (Linear axis, Fast Trigger, rebound with hand, noise reduction HiFi game office)
  • SWK SPERMACETI AXIS (Linear axis, pok, top and bottom nylon)
Various switch types: LEOBOG Purple Emperor Axis, LEOBOG Smart axis V3, LEOBOG Reaper shaft axis with specifications.
Figure 8: Detailed specifications for LEOBOG Purple Emperor, Smart V3, and Reaper shaft axes.
Additional switch types: TTC FLAME PURPLE AXIS, SWK SPERMACETI AXIS with specifications.
Figure 9: Detailed specifications for TTC FLAME PURPLE AXIS and SWK SPERMACETI AXIS.

4.4. Typing Experience

The keyboard incorporates a gasket structure and five layers of sound-dampening materials (Poron cotton, IXPE shaft underlay, Pet acoustic pad, Poron undercoat, Silicone base pad) to reduce noise and provide a soft, elastic typing feel.

True Soft Elastic Gasket Structure
Figure 10: Close-up view demonstrating the true soft elastic gasket structure of the keyboard.
Five-layer padding for silencing (Gasket Structural design) - exploded view
Figure 11: Exploded view illustrating the five-layer padding for silencing within the gasket structural design.

4.5. Product Demonstration Video

Video 1: A demonstration of the Aula F99 keyboard's features, including connection modes, RGB lighting, and typing sound.

5. Maintenance

5.1. Cleaning

  • Keycaps: Use a keycap puller to remove keycaps. Clean them with a mild soap solution and a soft cloth, then rinse and dry thoroughly before reattaching.
  • Keyboard Body: Use a soft, dry cloth to wipe down the keyboard. For stubborn dirt, a slightly damp cloth can be used, ensuring no moisture enters the internal components.
  • Between Keys: Use compressed air to blow out dust and debris from between the keys.

5.2. Switch and Keycap Replacement

Thanks to the hot-swappable design, you can easily replace switches and keycaps:

  • Keycaps: Use the provided keycap puller to gently remove keycaps. Align new keycaps with the switch stem and press down firmly until secure.
  • Switches: Use the provided switch puller to carefully grip and pull out the existing switch. Align the pins of the new switch with the holes on the PCB and press down gently until it clicks into place. Ensure pins are not bent.

6. Troubleshooting

  • Keyboard not responding:
    • Check the connection mode switch (2.4G, BT, Wired) is set correctly.
    • For wired mode, ensure the Type-C cable is securely connected to both the keyboard and the computer.
    • For 2.4G wireless, ensure the USB receiver is plugged in and the keyboard is charged.
    • For Bluetooth, ensure Bluetooth is enabled on your device and the keyboard is paired. Try re-pairing if necessary.
    • Ensure the keyboard battery is charged.
  • RGB lighting not working or incorrect:
    • Check onboard lighting controls (Fn + specific keys) to ensure it's not turned off or set to a static mode.
    • If using the driver software, ensure it's running and settings are applied correctly.
  • Keys not registering:
    • Ensure the keyboard is properly connected and powered on.
    • If a specific key is not working, try replacing its switch (due to hot-swap feature).
    • Clean any debris from around the affected key.
  • Intermittent wireless connection:
    • Move the keyboard closer to the receiver/device.
    • Ensure there are no strong interference sources (e.g., other wireless devices, large metal objects) nearby.
    • Try using a different USB port for the 2.4G receiver.

7. Specifications

Feature Specification
Model F99
Connectivity Bluetooth 5.0, 2.4G Wireless, Type-C Wired (Tri-mode)
Layout 99 Keys (Standard)
Operation Style Mechanical
Keycaps Two-color PBT
Structure Gasket structure, Five-layer sound dampening
Switches Hot-swappable (compatible with LEOBOG, TTC, SWK axes)
Battery 8000mAh Lithium Battery
Interface Type USB (for wired connection and 2.4G receiver)
Application Desktop, Laptop, Tablet
Language English
Dimensions (L x W x H) 36 cm x 18 cm x 5 cm (approximate)
Weight 1.7 kg (approximate)
Origin Mainland China

8. User Tips

  • Experiment with Switches: Take advantage of the hot-swap feature to try different switch types. This can significantly alter your typing and gaming experience.
  • Customize RGB: Use the driver software to create personalized RGB lighting profiles that match your setup or mood.
  • Optimize Battery Life: When not in use, switch the keyboard off or to wired mode to conserve battery. Adjusting RGB brightness can also extend battery life.
  • Firmware Updates: Periodically check the manufacturer's website for firmware updates to ensure optimal performance and access to new features.

9. Warranty and Support

For detailed warranty information, technical support, and further documentation, please refer to the official user manual PDF provided by the manufacturer. You can view the PDF here.

For any issues not covered in this manual, please contact the seller or manufacturer's customer support.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.