amagi Indoor Car Lighting Ceiling Lamp

Contents

amagi Car Interior LED Touch Light User Manual

Model: Indoor Car Lighting Ceiling Lamp

1. Introduction

Thank you for choosing the amagi Car Interior LED Touch Light. This multi-functional, durable, and easy-to-operate light is designed to enhance your vehicle's interior with smart touch control and versatile illumination options. This manual provides essential information for the safe and effective use of your new car interior light.

2. Safety Information & Precautions

Please read and understand all safety information before using the product. Failure to follow these instructions may result in damage to the product or vehicle.

  • Do not overload the electrical circuit; observe safe operating procedures for automotive accessories.
  • Inspect the light for integrity and any damage before each use.
  • Maintain stability during operation; ensure the light is securely mounted.
  • Avoid dropping the device.
  • Keep out of reach of children.
  • Do not attempt to disassemble or modify the light.

3. Product Overview

The amagi Car Interior LED Touch Light features a sleek, compact design suitable for various interior locations such as the ceiling or console area. It offers different emitting colors and is controlled via a smart touch interface.

An overview of the car interior light unit, showing its sleek design and demonstrating both warm and blue light options installed in a vehicle.
Figure 1: Product overview with warm and blue light examples.

4. Installation

The light is designed for easy, surface-mounted installation. Ensure the mounting surface is clean, dry, and smooth for optimal adhesion.

  1. Identify a suitable location in your car's interior (e.g., ceiling, console, trunk).
  2. Clean the chosen surface thoroughly to remove any dust, grease, or debris.
  3. Peel off the protective backing from the adhesive on the back of the light.
  4. Carefully position the light and press firmly onto the surface for several seconds to ensure strong adhesion.
  5. Allow the adhesive to set for a few hours before regular use, if possible.

5. Operation

The amagi Car Interior LED Touch Light features intuitive touch control for ease of use.

Demonstration of the touch control feature, showing a finger activating the light, along with various light colors and potential installation locations.
Figure 2: Touch control demonstration and various light applications.
  • Power On/Off: Gently touch the designated touch area on the light to turn it on or off.
  • Change Emitting Color: Repeatedly touch the control area to cycle through available light colors (e.g., warm light, blue light).

Light Modes:

The interior car light emitting a warm, non-dazzling glow, designed to be gentle on the eyes.
Figure 3: Warm Light Mode (Non-dazzling for eye comfort).
The LED ambient light in blue mode, highlighting its smart touch design and modern aesthetic.
Figure 4: Blue Ambient Light Mode.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to wipe the surface of the light. Do not use abrasive cleaners or solvents.
  • Storage: If removing the light for extended periods, store it in a cool, dry place away from direct sunlight.
  • Battery: This device is typically powered by the vehicle's electrical system or an internal rechargeable battery. Refer to the full user manual PDF for specific battery care instructions if applicable.

7. Troubleshooting

  • Light not functioning:
    • Ensure the light is properly installed and making good contact with the power source (if wired) or fully charged (if battery-powered).
    • Check for any visible damage to the unit.
    • If the issue persists, contact after-sales service for assistance.

8. Specifications

Feature Specification
Brand amagi
Item Type Interior Light / Day Light
Origin Mainland China
Dimensions (L x W x H) 14 cm (5.51 in) x 7 cm (2.75 in) x 1.2 cm (0.47 in)
Weight 0.1 kg
Emitting Color Options White and blue, Blue and yellow
Control Method Smart Touch Design
A diagram showing the dimensions of the car interior light: 14cm (5.51in) length, 7cm (2.75in) width, and 1.2cm (0.47in) height.
Figure 5: Product Dimensions.

Available Color Variants:

A close-up of the car interior light, illustrating the white and blue color variant.
Figure 6: White and Blue Light Variant.
A close-up of the car interior light, illustrating the blue and yellow color variant.
Figure 7: Blue and Yellow Light Variant.

9. User Tips

  • For optimal ambient lighting, consider installing multiple units in different areas of your car.
  • Experiment with both warm and blue light modes to find the best atmosphere for different driving conditions or moods.

10. Warranty & Support

For detailed warranty information, technical support, or to report any issues, please refer to the official product documentation or contact the seller's customer service.

A comprehensive user manual in PDF format is available for download: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.